English

10G SFP+ Active Optical cable JHA-SFP-10G-AOC

10G SFP+ Active Optical cable JHA-SFP-10G-AOC Featured Image
  • 10G SFP+ Active Optical cable JHA-SFP-10G-AOC
  • 10G SFP+ Active Optical cable JHA-SFP-10G-AOC
  • 10G SFP+ Active Optical cable JHA-SFP-10G-AOC

Short Description:

Support 10GBASE-SR/10G Fiber Channel application
Compliant to SFP+ Electrical MSA SFF-8431
Compliant to SFP+ Mechanical MSA SFF-8432


GET ONE FREE SAMPLE

Overview

Download

Features

◊ Support 10GBASE-SR/10G Fiber Channel application

◊ Compliant to SFP+ Electrical MSA SFF-8431

◊ Compliant to SFP+ Mechanical MSA SFF-8432

◊ Multi rate of up to 11.3Gbps

◊ Transmission distance up to 300m

◊ +3.3V single power supply

◊ Low power consumption

◊ Operating case temp Commercial: 0°C to +70 °C

◊ RoHS compliant

◊ Password protection for A0h and A2h

Applications

◊ 10GBASE-SR at 10.31Gbps

◊ InfiniBand QDR, SDR, DDR

◊ Other optical links

Specification:

Absolute Maximum Ratings

Table1- Absolute Maximum Ratings

Parameter Symbol

Min.

 Typical Max. Unit Notes
Supply Voltage Vcc3

-0.5

 - +3.6 V  
Storage Temperature Ts

-10

 - +70 °C  
Operating Humidity RH

+5

 - +85 % 1
Receiver Damage Threshold P Rdmg

+3.4

 - - dBm  

Note1: No condensation

Recommended Operating Conditions

Table 2- Recommended operating Conditions

Parameter Symbol Min. Typical

Max.

 Unit Notes
Operating Case Temperature TC 0 -

+70

 °C  
Power Supply Voltage Vcc 3.14 3.3

3.47

 V  
Power Supply Current Icc - -

150

 mA  
Power Dissipation Pd - -

0.6

 W  
Bit Rate BR - 10.3125 - Gbps  
Fiber Bend Radius Rb 3 - - cm  

Electrical Characteristics

Table 3- Electrical Characteristics

Parameter Symbol Min. Typ.

Max.

 Units Notes

                                       Transmitter
Differential Data Input Swing Vin,P-P 200 - 1600 mVPP  
Input Differential Impedance ZIN 90 100 110 Ω  
 Tx_Fault Normal Operation VOL 0 - 0.8 V  
Transmitter Fault VOH 2.0 - VCC V  
 Tx_Disable Normal Operation VIL 0 - 0.8 V  
Laser Disable VIH 2.0 - VCC+0.3 V  
Receiver
Differential Date Output Vout 370 -

1600

 mV  
Output Differential Impedance ZD 90 100

110

 Ω  
 Rx_LOS Normal Operation VOL 0 -

0.8

 V  
Lose Signal VoH 2.0 -

VCC

 V  

Optical Characteristics

Table 4-Optical Characteristics

Parameter Symbol

Unit

 Min Typ Max Notes
Optical transmitter Characteristics
Data Rate DR

Gbps

 9.953 10.3125 11.3  
Center Wavelength Range λc

nm

 820 850 880  
Laser Off Power Poff

dBm

 - - -45  
Launch Optical Power P0

dBm

 -6.0

-

-

 1
Extinction Ratio ER dB 3

-

-

  
Spectral Width(RMS) RMS

nm

 -

-

0.45

  
Optical Receiver Characteristics
Data Rate DR

Gbps

 9.953 10.3125 11.3  
Bit Error Rate BER

dBm

 - - E-12 2
Overload Input Optical PIN

dBm

 2.4 - - 2
Power            
Center Wavelength Range λc

nm

 820

-

 880  
Receiver Sensitivity inAverage Power

Sen

dBm

 -

-

 -9.9 3
Los Assert

LosA

dBm

 -26

-

 -  
Los De-Assert

LosD

dBm

 -

-

 -12  
Los Hysteresis

LosH

 dB 0.5

-

 -  

Note:

  1. Coupled into 50/125 MMF.
  2. Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=10E-12

Recommended Host Board Power Supply Circuit

34 (1)

             Figure 1, Recommended Host Board Power Supply Circuit

Recommended Interface Circuit

34 (2) 

Figure 2, Recommended Interface Circuit

Pin arrangement

34 (3) 

Figure 3, Pin View

Table 5-Pin Function

Definitions

Pin Symbol Name/Description Notes
1 VEET Module Transmitter Ground 1
2 TX_FAULT Module Transmitter Fault 2
3 TX_DISABLE Transmitter Disable; Turns off transmitter laser output 3
4 SDA 2-Wire Serial Interface Data Line (MOD-DEF2)  
5 SCL 2-Wire Serial Interface Clock (MOD-DEF1)  
6 MOD_ABS Module Absent, connected to VEET or VEER in the module 2
7 RS0 Rate Select 0, optionally controls SFP+ module receiver  
8 RX_LOS Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) 2
9 RS1 Rate Select 1, optionally controls SFP+ module transmitter  
10 VEER Module Receiver Ground 1
11 VEER Module Receiver Ground 1
12 RD- Receiver Inverted Data Output  
13 RD+ Receiver Non-Inverted Data Output  
14 VEER Module Receiver Ground 1
15 VCCR Module Receiver 3.3 V Supply  
16 VCCT Module Transmitter 3.3 V Supply  
17 VEET Module Transmitter Ground 1
18 TD+ Transmitter Non-Inverted Data Input  
19 TD- Transmitter Inverted Data Input  
20 VEET Module Transmitter Ground 1

Note:

  1. The module ground pins are isolated from the module case.
  2. The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
  3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.

Monitoring Specification

34 (4) 

Figure 4, Memory Map

Mechanical Design Diagram

Unit:mm

34 (5)

Table 6- Cable

Length

Cable Length  L（Unit: m） Tolerant（Unit: cm）
≤1.0 +5/-0
1.0＜L≤4.5 +15/-0
4.5＜L≤14.5 +30/-0
＞14.5 +2%/-0

Warnings

Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.

Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories