4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, without Wi-Fi function JHA700-E304

Short Description:

JHA700-E304 series is fiber to the home multi service access EPON ONU. It’s based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology.


Overview

Download

 Brief Views

JHA700-E304 series is fiber to the home multi service access EPON ONU. It’s based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology. JHA700-E304 series has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3ah requirements and have good compatibility with third party manufacturers OLT.

EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.

It adopts single fiber WDM technology with downlink wavelength 1550nm and 1490nm, uplink wavelength 1310nm . It only needs one-core fiber to transmit data and CATV service.

 Functional Feature

♦ Support port-based rate limitation and bandwidth control;

♦ In compliant with IEEE802.3ah Standard

♦ Up to 20KM transmission Distance

♦ Support data encryption, group broadcasting, port Vlan separation ,etc.

♦ Support Dynamic Bandwidth Allocation (DBA)

♦ Support ONU auto-discovery/Link detection/remote upgrade of software;

♦ Support port mode of VLAN configuration

♦ Support power-off alarm function ,easy for link problem detection

♦ Support broadcasting storm resistance function

♦ Support port isolation between different ports

♦ Support port flow control

♦ Support ACL to configure data packet filter flexibly

♦ Specialized design for system breakdown prevention to maintain stable system

♦ Support software online upgrading

♦ EMS network management based on SNMP ,convenient for maintenance  

Product interface and LED definitions

32 4

Indicator

Description

1

PWR

Power status

On: The ONU is power onOff: The ONU is Power off

2

CATV

CATV status

On:CATV optical normalOff:The CATV signals are not received

3

LAN1-4

LAN port status

On: Ethernet connection is normalBlinking: Data is being transmitted through the Ethernet portOff: Ethernet connection is not set up

4

LOS

EPON optical signals

On: Optical power lower than receiver sensitivity ;Off: Optical in normal

5

PON

ONU Register

On: Success to register to OLTBlinking: In process of registering to OLTOff: Failed to register to OLT;

Specification

Item

Parameter

PON Interface 1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC/APC single-mode fiber
split ratio: 1:64
Transmission distance 20KM
User Ethernet
Interface
4*10/100M or 4*10/100/1000M or 1*10/100/1000M and 3*10/100/1000M auto-negotiationFull/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance
RF Interface Female F-Type Connector
Power Interface 12V DC Power supply
PONOpticalParameter Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: 0~4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm
Data Transmission
Parameter
PON Throughput: Downstream 980Mbps; Upstream 950Mbps
Ethernet: 100Mbps or 1000Mbps
Packet Loss Ratio: <1*10E-12
latency: <1.5ms
Business
Capability
Layer 2 wire speed switchingSupport VLAN TAG/UNTAG,VLAN translationSupport Port-based speed limitationSupport Priority classification

Support storm control of broadcast

Support loop detection

Network
Management
Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport EMS management through OLT SNMP -agent and TelnetLocal management
Management
Function
Status monitor, Configuration management, Alarm management,
Log management
Shell Plastic casing
Power 4FE:                <6.5W, 12V/0.6A power supply adapter3FE+1GE:            <6.5W, 12V/0.6A power supply adapter4GE:                <7.5W, 12V/1A power supply adapter
Physical
Specifications
Item Dimension:170mm(L)*130mm(W)*30mm(H)Item weight:0.3kg
Environmental
Specifications
Operating temperature: 0 to 50ºC
Storage temperature: -40 to 85ºC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 10% to 90%(Non-condensing)

CATV

Item

Parameter

Wavelength

1550nm

Optical return loss

>45dB

Input optical power

-18dBm~0dBm

RF frequency

47MHz~1000MHz

RF output lever

78dBuV (@-12~-2dBm@85MHz)

CNR

>41dB (@-10dBm@DS22 Channel)

CSO

>60dBc (@-10dBm@DS22 Channel)

CTB

>60dBc (@-10dBm@DS22 Channel)

RF output return loss

>12dB

RF impedance

75Ω

AGC function

Support

Network application

Typical Solution:FTTH, FTTO

Typical Business:INTERNET, CATV

56

Figure: JHA700-E304 (not include wifi) series EPON ONU Application Diagram

Ordering Information

Product Name

Product Model

Descriptions

4FE+CATV

Single fiber

JHA700-E304FA-HR501

4*10/100M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, support AGC function, Plastic casing, external power supply adapter

4GE+CATV

Single fiber

JHA700-E304GA-HR501

4*10/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, support AGC function, Plastic casing, external power supply adapter

1GE+3FE+CATV Single fiber

JHA700-E304XA-HR501

3*10/100M and 1*10/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, support AGC function, Plastic casing, external power supply adapter

  • Previous:
  • Next:

  • Write your message here and send it to us