Mai Canjin ƙwararriyar China G703 E1 Zuwa V35 - Mai Rarraba E1-FE Mai Canjin JHA-CE1fF1 – JHA

Mai sauya fasalin E1-FE mai karewa JHA-CE1fF1

Dubawa

Wannan mai sauya mu'amala yana dogara ne akan FPGA, yana ba da ƙirar E1 mai ƙira guda ɗaya da ƙirar Ethernet guda ɗaya don cimma watsa bayanan Ethernet na 10/100Base-T akan tashar E1. Babban aiki ne, gadar Ethernet mai koyon kai. Wannan na'urar ita ce na'urar faɗaɗawa ta Ethernet, ta amfani da hanyar sadarwa (PDH/SDH/Microwave) wanda ke samar da tashar E1 don cimma haɗin haɗin gida da na nesa na Ethernet tare da musaya na layi a farashi mai sauƙi. Na'urar tana da aikin gwajin madauki na tsaka-tsaki don sauƙaƙe ƙaddamar da aikin da kiyayewa yau da kullun.

Hoton samfur

Nau'in Mini

Siffofin

• Dangane da hakkin mallaka na IC
• Za a iya gane saka idanu da sarrafa kayan aiki mai nisa, bayanan gudanarwa na OAM ba su ɗauki lokutan mai amfani da adana bandwidth na E1 ba
• E1 yana goyan bayan kowane saita lokaci, ƙimar shine 64K-2048K
• Na'urar gida na iya tilasta ƙimar na'urar nesa ta bi ta
• Yi aikin E1 dubawa madauki na baya, guje wa mai canzawa saboda dawowar madauki na dubawa;
• Yi alama lokacin da na'urar ke kashe wuta ko layin E1 ya karye ko rasa sigina;
• Zai iya saita layin E1 wanda kada ya aika siginar LINK zuwa kewayon Ethernet yayin da layin E1 ya karye;
• Cibiyar sadarwa ta Ethernet tana goyan bayan firam ɗin jumbo (2036 Bytes);
• Adireshin MAC mai tsauri mai tsauri na tsaka-tsaki (4,096) tare da tace firam ɗin bayanan gida
• Ethernet dubawa yana goyan bayan 10M / 100M, rabin / cikakken duplex auto- Tattaunawa da AUTO-MDIX (layin da aka ketare da kuma madaidaiciyar layin da aka haɗa kai tsaye);
• Yi aikin sake saitin Ethernet na saka idanu, kayan aikin ba zai mutu ba
• Zai iya cimma saitin na'ura mai nisa kowane yanayin 5 na Ethernet kuma yana iya rufe aikin AUTO-MDIX;
• Samar da nau'ikan agogo 2: E1 babban agogo da agogon layin E1;
• Yi Yanayin Madauki guda uku: E1 interface Loop Back (ANA),Ethernet Interface Loop Back(DIG),Umurnin nesa
• Ethernet Interface Loop Back(REM)
• Samar da 2 impedances: 75 Ohm rashin daidaituwa da 120 Ohm ma'auni;
• Taimakawa SNMP Network Management;
• Zai iya gane yanayin zafin kayan aiki mai nisa da ƙarfin lantarki daga kayan gida;
• Zai iya samar da tsarin: Ethernet E1 Bridge(A)- --E1 Optical Fiber Modem(B)- --Ethernet Optical Fiber Modem (C)
• Zai iya samar da tsarin: Ethernet E1 Bridge(A)- -- Optical Ethernet E1 Bridge (B)- --Ethernet Optical Fiber Transceiver (C), na iya sarrafa (B) da (C) a (A)

Ma'auni

♦E1 Interface

Matsayin Interface: bi ka'idar G.703;
Matsakaicin Matsayi: n * 64Kbps± 50ppm;
Lambar mu'amala: HDB3;

E1 Impedance: 75Ω (rashin daidaituwa), 120Ω (ma'auni);

Haƙuri na Jitter: Bisa ga yarjejeniya G.742 da G.823

Ƙaddamar da izini: 0 ~ 6dBm

♦Ethernet dubawa (10/100M)

Matsakaicin mu'amala: 10/100 Mbps, rabi/cikakken shawarwari na atomatik na duplex

Ma'auni na Interface: Mai jituwa tare da IEEE 802.3, IEEE 802.1Q (VLAN)

Ikon adireshin MAC: 4096

Mai haɗawa: RJ45, goyan bayan Auto-MDIX

♦Yanayin aiki

Zafin aiki: -10°C ~ 50°C

Humidity na Aiki: 5% ~ 95 % (babu ruwa)

Adana zafin jiki: -40°C ~ 80°C

Humidity na Ajiye: 5% ~ 95 % (babu narke)

Ƙayyadaddun bayanai

Aikace-aikace

Magani na al'ada 1

Magani na al'ada 2

Magani na al'ada 3