8E1+4FE(Hoʻokaʻawale kino) JHA-CPE8WF4 PDH Fiber Multiplexer

8E1+4FE(Hoʻokaʻawale kino)JHA-CPE8WF4

PDH Fiber Multiplexer

Nānā nui

ʻO kēia pūʻulu o nā mea hana ka hui i hoʻomohala i ka PDH fiber transmission i hoʻolaʻa ʻia ʻo VLSI i hoʻomohala ʻia ma ke kumu o ka point to point optical transmission.Hāʻawi i 1-8 E1 interfaces, kumu mua a me ka hoʻopili fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (kūʻokoʻa ʻehā-wire speed 100M, ka nui o ka bandwidth he 4 * 100M), a me ʻelua ʻoihana hoʻonui pānaʻi.2 Hiki ke hoʻohana ʻia ke kikowaena lawelawe e like me RS232 / RS485 / RS422 asynchronous data, hiki ke maʻalahi ka noi.Hoʻokahi kelepona lawelawe kikohoʻe koho, hiki ke maʻalahi ke noi.Me ka hana ho'āla kani, ka hale paʻa holoʻokoʻa, hilinaʻi, haʻahaʻa mana hoʻohana, hoʻohui kiʻekiʻe, liʻiliʻi liʻiliʻi.

Kiʻi Huahana

Nā hiʻohiʻona

• Ma muli o ka IC ponoʻī
• 1-4 hoʻokaʻawale kino 10/100M Fast Ethernet interface, ʻo kēlā me kēia FE Ethernet kūʻokoʻa uea wikiwiki ʻo 100M, ʻo ka nui o ka bandwidth he 4 * 100M;
• Hāʻawi i ke kikowaena hoʻokele Console (RS232)
• Hāʻawi i ʻelua mea hoʻopili fiber 1+1 pale（APS）hana
• ʻO 10/100M, ka hapa / piha duplex Auto-Nego
• Kākoʻo ʻo Ethernet i nā pahu jumbo, a hiki i 10240 byte
• Hoʻopili ʻo E1 me G.703, hoʻohana i ka hoʻihoʻi ʻana i ka uaki kikohoʻe a me ka ʻenehana laka paʻa
• Hoʻohana i ke kelepona uea maʻamau 2 (nā lima kelepona ʻole) i hoʻonohonoho ʻia e like me ke kauoha ʻenekinia-wire hotline (koho)
• Ke nalowale ka hōʻailona optical, hiki iā ia ke ʻike i ka pau ʻana o ka mana mamao a i ʻole ke kāpae ʻia ka fiber, a hōʻike i ka alarm e LED.
• Hiki i ka mea kūloko ke nānā i ke kūlana hana mamao
• Hāʻawi i ke kauoha i ke kikowaena mamao Loop Back, kākoʻo i ka hana E1 Loop Back kūloko, kākoʻo iā E1 LOS a me AIS alarm, hoʻomaʻamaʻa i ka mālama laina.
• ʻO ka mamao o ka hoʻouna ʻana a hiki i 2-100Km me ka ʻole o ke keakea
• Kākoʻo i ka mana SNMP (SNMP agent i loko)
• AC 220V, DC-48V, DC24V hiki ke koho
• DC-48V/DC24V mana hāʻawi i ka hana ʻike polarity, Polarity-Free

Nā ʻāpana

♦ʻO ka fiber

Fiber ano nui

50/125um, 62.5/125um,

Ka lōʻihi o ka hoʻouna ʻana: 5Km @ 62.5 / 125um hoʻokahi fiber mode, attenuation (3dbm/km)

Ka lōʻihi o ka hawewe: 820nm

Ka mana hoʻouna: -12dBm (Min) ~-9dBm (Max)

Ka ʻike o ka mea loaʻa: -28dBm (Min)

Pili kālā: 16dBm

Hoʻokahi-moʻo fiber

8/125um, 9/125um

Ka lōʻihi o ka hoʻouna ʻana: 40Km

Ka lōʻihi o ka lawe ʻana: 40Km @ 9 / 125um hoʻokahi fiber mode, attenuation (0.35dbm/km)

Ka lōʻihi o ka nalu: 1310nm

Ka mana hoʻouna: -9dBm (Min) ~-8dBm (Max)

Ka ʻike o ka mea loaʻa: -27dBm (Min)

Pili kālā: 18dBm

uE1 Interface

Kūlana Interface: hoʻokō me ka protocol G.703;
Ka helu o ka Interface: 2048Kbps±50ppm;
Code Interface: HDB3;

E1 Impedance: 75Ω (ke kaulikeʻole), 120Ω (kaulike);

ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823

ʻAe ʻia ka Attenuation: 0~6dBm

♦Pilipili Ethernet (10/100M)

Laki waena: 10/100 Mbps, ka hapalua/piha duplex auto-negotiation

Kūlana Interface: Kūpono me IEEE 802.3, IEEE 802.1Q (VLAN)

Hiki iā MAC Address: 4096

Mea hoʻohui: RJ45, kākoʻo Auto-MDIX

♦Kaiapuni hana

Ka wela hana: -10°C ~ 50°C

Ka haʻahaʻa hana: 5% ~ 95 % (ʻaʻohe condensation)

Ka mahana mālama: -40°C ~ 80°C

Waihona haʻahaʻa: 5%~95 % (ʻaʻohe condensation)

Nā kikoʻī

Palapala noi