Kūʻai nui Kina 1 + 1 Fiber Back-Up Pdh - Modular multi-service Fiber MUX JHA-C2PM-E16 - JHA

ʻO ka hoʻohana nui ʻana i ka fiber MUX JHA-C2PM-E16

Nānā nui

ʻO kēia hāmeʻa he modular structure point-to-point optical transmission me ka LCD display, hoʻohana i nā pahu FPGA a maʻalahi hoʻi e hoʻonui. Hāʻawi ka Papa Nui i ka ʻikepili Ethernet 4 * 100M channel a me 2 AUX port no ka hoʻouna ʻana i nā ʻikepili ʻē aʻe e like me RS232/RS485/RS422, ʻelua interface optical no ke koho 1 + 1 auto protection switch (APS).

ʻO 4 mau ʻāpana o ka tributary me nā modula plug-in ʻokoʻa i loaʻa i ka module 4xE1 channels, 4/8/16 x FXO/FXS module a me 2x Nx64K V.35 module. ʻO ka nui o ka hiki ke piʻi i 4 plug-in modules i hiki ke hui pū ʻia me ma luna o nā modula. ʻO ka maʻalahi, ka hana, ʻo ia ka hopena maikaʻi loa no nā lawelawe leo / data / wikiō ma ka mākeke i loaʻa.

Kiʻi Huahana

ʻAno Papakaukau

Nā hiʻohiʻona

• Hāʻawi i ka nui 16 E1 hikiwawe hoʻoili uila;
• Me ka char 16*2 LCD hōʻike a me ka SNMP agent i loko.
• Hāʻawi i ke kikowaena hoʻokele Console (RS232)
• E hoʻolako i hoʻokahi kaila hotline no ke koho;
• E hoʻolako i ʻelua mau kikowaena SFP fiber, hoʻokahi ma ke ʻano he haku, ʻo kekahi ma ke ʻano he kauā, e hōʻoiaʻiʻo ana i ka hoʻouna ʻana i ka lawelawe ʻole.
• ʻO ka nui o ka port optical he 155Mbps, hiki i ka pae hoʻouna ke hiki i 25KM, 40KM, 60KM, 80KM a i ʻole 100KM;
• Hāʻawi i ʻelua mea hoʻopili fiber 1+1 pale (APS) hana, a me ALS (Automatic Laser Shutdown/Reduction) hana
• Hāʻawi i 4 mau ʻāpana plug-in modules:

♦ 4×puka ʻole E1 module（75Ω）/（120Ω）

♦ 4×Framed E1 module（75Ω）/（120Ω）, hiki ke hoʻonohonoho i nā manawa

♦ 4×FXO/FXS/EM2-4/Mode kelepona

♦ 8×FXO/FXS/2 laina leo leo/Magnet kelepona module

♦ 16×FXO/FXS/2 laina leo/Magnet kelepona module

♦ 2×V.35 (2.048M Paʻa wikiwiki) module

♦ 2×V.35 (N*64K N=1-32) module

♦ 4×RS232/422/485 module

♦ 4*FE i ke alahaka E1 (wire speed 2.048M) module

• Hāʻawi i ka 4FE (wire speed 100M) Ethernet channel, kākoʻo i ka negatiate, ua hoʻonohonoho ʻia ka bandwidth Ethernet ma luna o ka nui o 32K.;
• Kākoʻo ʻo Ethernet port i ka piha / hapalua duplex, 10M / 100M auto-ataptable;
• Kākoʻo ke awa Ethernet i ka hana VLAN a loaʻa iā 4 ke ʻano hoʻokaʻawale no ke koho mea hoʻohana;
• Kākoʻo ʻia ka nui o ka pūʻolo Ethernet i ka 1916 byte a me 4 Ethernet awa hiki ke hoʻonohonoho kaʻawale;
• Loaʻa iā ia ka hana alarm piha a hiki ke nānā i ke kūlana o ka mea mamao;
• Kākoʻo iā E1 loop mai kahi mamao e ʻike a hoʻokele pono i ka hāmeʻa;
• ʻO ka hui pū ʻana o AC220V a me DC-48V no ka redundant

Nā ʻāpana

♦ʻO ka fiber

Fiber ano nui

50/125um, 62.5/125um,

Ka lōʻihi o ka hoʻouna ʻana: 5Km @ 62.5 / 125um hoʻokahi fiber mode, attenuation (3dbm/km)

Ka lōʻihi o ka hawewe: 820nm

Ka mana hoʻouna: -12dBm (Min) ~-9dBm (Max)

Ka ʻike o ka mea loaʻa: -28dBm (Min)

Pili kālā: 16dBm

Hoʻokahi-moʻo fiber

8/125um, 9/125um

Ka lōʻihi o ka hoʻouna ʻana: 40Km

Ka lōʻihi o ka lawe ʻana: 40Km @ 9 / 125um hoʻokahi fiber mode, attenuation (0.35dbm/km)

Ka lōʻihi o ka nalu: 1310nm

Ka mana hoʻouna: -9dBm (Min) ~-8dBm (Max)

Ka ʻike o ka mea loaʻa: -27dBm (Min)

Pili kālā: 18dBm

♦E1 Interface

Kūlana Interface: hoʻokō me ka protocol G.703;
Ka helu o ka Interface: n*64Kbps±50ppm;
Code Interface: HDB3;

E1 Impedance: 75Ω (ke kaulikeʻole), 120Ω (kaulike);

ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823

ʻAe ʻia ka Attenuation: 0~6dBm

♦Pākuʻi Ethernet(10/100M)

Laki waena: 10/100 Mbps, ka hapalua/ piha duplex auto-negotiation

Kūlana Interface: Kūpono me IEEE 802.3, IEEE 802.1Q (VLAN)

Hiki iā MAC Address: 4096

Mea hoʻohui: RJ45, kākoʻo Auto-MDIX

♦FXS Phone Interface

Puke kani: 75V

Alapine kani: 25HZ

ʻElua laina Impedance: 600 Ohm (pii)

Hoʻihoʻi poho: 40 dB

♦FXO Switch Interface

ʻIke ʻia ke kani uila: 35V

ʻO ke alapine ʻike apo: 17HZ-60HZ

ʻElua laina Impedance: 600 Ohm (pii)

Hoʻihoʻi poho: 40 dB

♦IN 2/4 Laina

AD: 0dB

DA: -3.5dB

ʻElua/ʻEhā-laina Impedance: 600 Ohm

Hoʻihoʻi poho: 20 dB

♦Kaiapuni hana

Ka wela hana: -10°C ~ 50°C

Ka haʻahaʻa hana: 5% ~ 95 % (ʻaʻohe condensation)

Ka mahana mālama: -40°C ~ 80°C

Ka haʻahaʻa mālama: 5% ~ 95 % (ʻaʻohe condensation)

Nā kikoʻī

Palapala noi

Hāʻawi ka motherboard:
1. Hōʻike LCD;
2.4-kanal uea-wikiwiki 100M kaʻana Ethernet channel;
3.2- kaila RS232 / 422/485 asynchronous auwai;
4.1 kanal kelepona lehulehu
5. Hoʻoponopono pūnaewele SNMP

4 slot, kākoʻo i ka hoʻokomo hui ʻia, hāʻawi:
4 × E1 module (75Ω) / (120Ω)
4 × framing E1 module (75Ω) / (120Ω), hiki iā ʻoe ke hoʻonohonoho i kahi manawa manawa kūpono.
4 × FXO / FXS / EM2-4 / modula magnet
8 × FXO / FXS / 2 uea leo / magnet module
16 × FXO / FXS / 2 uea leo / kōpena magnet
2 × V.35 (2.048M helu paʻa) module
2 × V.35 (N * 64K N = 1-32) modules
4 × RS232 / 422/485 / hoʻololi module
4 'Enenet bridge (rate 2.048M) module
E like me ka mea i luna, inā makemake ʻoe e hoʻokō i ka hana kelepona 8E1 + 4FE + 32-way (FXO / FXS), hiki iā ʻoe ke hoʻonohonoho i ʻelua kāleka 4E1, ʻelua kāleka kelepona 16xFXO / S.