Ọnụ ahịa n'ùkwù 2019 E1 Ka Ntụgharị Optic - 8E1 PDH Fiber Multiplexer JHA-CPE8 – JHA

Ọnụ ahịa n'ùkwù 2019 E1 Ka Ntụgharị Optic - 8E1 PDH Fiber Multiplexer JHA-CPE8 – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Ebumnuche anyị kwesịrị ịbụ ka ọ bụrụ onye na-ebubata ngwa ahịa teknụzụ dị elu nke dijitalụ na nzikọrịta ozi site n'ịkwado atụmatụ agbakwunyere na ụdị, nrụpụta ọkachamara, na ịrụzi ike makaNtụgharị ekwentị karịrị E1,Mgbasa ngwa anya,40km Sc SFP transceiver ngwa anya, Anyị na-ekele gị ase na ọ bụ anyị ihe ùgwù na-arụ ọrụ na onye ọ bụla enyi n'ụwa nile.

Ọnụ ahịa n'ùkwù 2019 E1 Ka Ntụgharị Optic - 8E1 PDH Fiber Multiplexer JHA-CPE8 – JHA Nkọwa:

8E1 PDH Fiber Multiplexer JHA-CPE8

Nchịkọta

Ngwaọrụ a na-enye 1-8 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE8
Nkọwa ọrụ	8E1 PDH ， ịtụ ekwentị ekwentị, 19 inch 1U Ụdị （Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 8 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 483X138X44mm(WXDXH)
Ibu	2.3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

N'agbanyeghị ọhụrụ ahịa ma ọ bụ gara aga ahịa, Anyị kweere na ogologo oge na mmekọrịta ntụkwasị obi maka 2019 N'ogbe price E1 Ka Optic Ntụgharị - 8E1 PDH Fiber Multiplexer JHA-CPE8 – JHA , Ngwaahịa ga-enye n'ụwa nile, dị ka: Brunei. , UK, Rotterdam, Na mgbalị na-pacece na ụwa na-emekarị, anyị ga-mgba mbọ izute ahịa 'chọrọ. Ọ bụrụ na ịchọrọ ịmepụta ngwaahịa ọhụrụ ọ bụla, anyị nwere ike hazie ha maka gị. Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị ọ bụla ma ọ bụ chọọ ịmepụta ngwaahịa ọhụrụ, biko nweere onwe gị ịkpọtụrụ anyị. Anyị na-atụ anya ka anyị na ndị ahịa nọ n'ụwa niile nwee mmekọrịta azụmahịa na-aga nke ọma.