Ndepụta ọnụahịa dị ọnụ ala maka ngwa Pdh Fiber Optic - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA

Ndepụta ọnụahịa dị ọnụ ala maka ngwa Pdh Fiber Optic - 4E1 PDH Fiber Multiplexer JHA-CPE4m – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Corlọ ọrụ ahụ na-edobe echiche njikwa sayensị, ịdị elu dị elu na izizi arụmọrụ, nke kachasị ndị ahịaNtụgharị Rs232/Rs422/Rs485,Ihe Ntụgharị vidiyo Bidirectional Hdmi Ka Sdi,Ọwa Fiber Optical Audio Video Ntụgharị, Ebumnuche anyị bụ inyere ndị ahịa aka ịghọta ihe mgbaru ọsọ ha. Anyị na-agbasi mbọ ike iji nweta ọnọdụ mmeri a ma jiri ezi obi nabata gị ka ị sonyere anyị.

Ndepụta ọnụahịa dị ọnụ ala maka ngwa Pdh Fiber Optic Akụrụngwa - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Ọ bụ n'ezie ụzọ dị mma isi meziwanye ngwa ahịa na ọrụ anyị. Our mission would be to obtain inventive things to buyers with a very good encounter for Cheap PriceList for Pdh Fiber Optic Equipment - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Albania, Puerto Rico, South Africa, Anyị kwenyere na mma na afọ ojuju ndị ahịa nwetara site n'aka otu ndị raara onwe ha nye. Ndị otu ụlọ ọrụ anyị na-eji teknụzụ dị oke ọnụ na-ebuga ngwaahịa ndị na-enweghị atụ nke ndị ahịa anyị na-asọpụrụ ma nwee ekele maka ya n'ụwa niile.

Anyị na-ekweta mgbe niile na nkọwa na-ekpebi àgwà ngwaahịa nke ụlọ ọrụ, na nke a, ụlọ ọrụ na-eme ihe anyị chọrọ na ngwaahịa na-emezu ihe anyị tụrụ anya ya.
Kpakpando 5