Ọkachamara China 16 ọwa Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - JHA

Ọkachamara China 16 ọwa Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Ọganihu anyị na-adabere na akụrụngwa dị elu, nkà mara mma na ndị agha teknụzụ na-ewusi ike makaNgwa anya Cwdm,24 Port Fiber Optic Switch,1000base-Lx/Lh SFP Modul, Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị, biko nweere onwe gị iziga anyị ajụjụ gị. Anyị ji ezi obi na-atụ anya ka gị na gị nwee mmekọrịta azụmahịa na-enweta mmeri.

Ọkachamara China 16 ọwa Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4

(ụdị 19 inch 1U)

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4
Nkọwa ọrụ	4E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Ụdị （Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	2.3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Dị ka ụzọ iji zute ihe ndị ahịa chọrọ, a na-arụ ọrụ anyị niile n'ụzọ kwekọrọ na ụkpụrụ anyị dị elu, ọnụ ahịa ike ike, ọrụ ngwa ngwa maka ndị ọkachamara Chinese 16 Channel Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (19 inch 1U Type) – JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: South Korea, Swedish, Portugal, Anyị na-ahụ maka ihe niile nkọwa na ndị ahịa anyị ịtụ n'agbanyeghị na akwụkwọ ikike mma, afọ juru ọnụ ahịa, ngwa ngwa nnyefe, na oge nkwurịta okwu, afọ ojuju mbukota, mfe ugwo okwu, mma mbupu okwu, mgbe ahịa ọrụ wdg Anyị na-enye otu-sgood ọrụ na nnọọ pụrụ ịdabere na anyị ọ bụla ahịa. Anyị na ndị ahịa anyị, ndị ọrụ ibe anyị, ndị ọrụ na-arụkọ ọrụ iji mee ka ọdịnihu dị mma.

Ndị na-emepụta ihe a abụghị nanị na-asọpụrụ nhọrọ anyị na ihe ndị anyị chọrọ, kamakwa nyekwara anyị ọtụtụ ndụmọdụ dị mma, n'ikpeazụ, anyị rụchara ọrụ ịzụrụ ihe nke ọma.
Kpakpando 5