Ụlọ ọrụ dị ọnụ ala na-ekpo ọkụ E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m - JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Site na nchịkwa anyị magburu onwe ya, ikike teknụzụ siri ike na usoro nchịkwa siri ike, anyị na-aga n'ihu na-enye ndị ahịa anyị ezigbo mma, ụgwọ ezi uche na nnukwu ụlọ ọrụ. Anyị bu n'obi ịghọ otu n'ime ndị mmekọ gị na-ahụ maka ọrụ ma nweta obi ụtọ gị40km SFP Module transceiver,Rs232 ruo Rj45 nkwụnye,Sfp Transceiver, Anyị kwenyere na ọrụ anyị na-ekpo ọkụ na nke ọkachamara ga-ewetara gị ihe ịtụnanya dị ụtọ yana akụ.

Ụlọ ọrụ dị ọnụ ala na-ekpo ọkụ E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Inwe a ụda obere azụmahịa kredit akara, pụtara ìhè mgbe-sales ọrụ na ọgbara ọhụrụ n'ichepụta ụlọ ọrụ, anyị na enwetara ihe kediegwu aha n'etiti anyị buyers gafee ụwa maka Factory Cheap Hot E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , Ngwaahịa a ga-enye ụwa niile, dị ka: Dominica, Plymouth, Austria, Site na teknụzụ dị ka isi, mepụta ma mepụta mma dị elu. ngwa ahịa dị ka mkpa dị iche iche nke ahịa si dị. Site na echiche a, ụlọ ọrụ ahụ ga-aga n'ihu na-emepụta ngwa ahịa na ụkpụrụ agbakwunyere dị elu ma na-aga n'ihu na-emeziwanye ihe, ọ ga-ewetakwa ọtụtụ ndị ahịa ngwaahịa na ọrụ dị mma!

Onye isi ụlọ ọrụ nwere ahụmịhe njikwa bara ụba na àgwà siri ike, ndị ọrụ ahịa na-ekpo ọkụ ma na-enwe obi ụtọ, ndị ọrụ teknụzụ bụ ndị ọkachamara na ọrụ, yabụ anyị enweghị nchegbu maka ngwaahịa, onye nrụpụta mara mma.
Kpakpando 5