Ụlọ ọrụ dị ọnụ ala na-ekpo ọkụ E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m - JHA
Ụlọ ọrụ dị ọnụ ala na-ekpo ọkụ E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Nkọwa JHA:
4E1 PDH Fiber Multiplexer JHA-CPE4m
Nchịkọta
Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.
Foto ngwaahịa
Ogwe ihu
Ogwe azụ 75 ohm
120 ohm azụ Panel
Atụmatụ
- Dabere na ikike nwebiisinka IC
- Ihe nchọpụta ngwa anya dị obosara obosara modular
- Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
- E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
- Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
- Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
- Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
- Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
- AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
- DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.
Oke
♦Fiber
Multi-mode Fiber
50/125, 62.5/125,
Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)
Ogologo ebili mmiri: 820nm
Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)
Mmetụta nke nnata: -28dBm (Nkeji)
Ego njikọ: 16dBm
Otu ụdị Fiber
8/125, 9/125
Ogologo nnyefe kacha: 40Km
Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)
Ogologo ebili mmiri: 1310nm
Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)
Mmetụta nke nnata: -27dBm (Nkeji)
Mmefu ego njikọ: 18dBm
♦E1 interface
Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;
E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);
Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823
Attenuation ekwenyere: 0 ~ 6dBm
♦Ebe ọrụ
Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C
Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)
Okpomọkụ nchekwa: -40°C ~ 80°C
Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)
Nkọwapụta
| Nlereanya | Nọmba nlereanya:JHA-CPE4m |
| Nkọwa ọrụ | 4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri) |
| Nkọwa Port | Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms) |
| Ike | Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W |
| Akụkụ | Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH) |
| Ibu | 1.25KG/PCS |
Ngwa
75 ohm 4 * E1 PDH
120 ohm 4 * E1 PDH
Foto nkọwa ngwaahịa:
Ntuziaka ngwaahịa emetụtara:
Na a ụda azụmahịa kredit, magburu onwe mgbe-sales ọrụ na oge a n'ichepụta ụlọ ọrụ, we have earned an excellent reputation among our customers across the world for Factory Cheap Hot E1 Ethernet Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , Ngwaahịa ga-enye n'ụwa nile, dị ka: Israel, Swaziland, Salt Lake City, E wezụga na e nwekwara ọkachamara mmepụta na njikwa , elu mmepụta ngwá iji mesie anyị àgwà na nnyefe oge. , ụlọ ọrụ anyị na-agbaso ụkpụrụ nke ezi okwukwe, ịdị elu na arụmọrụ dị elu. Anyị na-ekwe nkwa na ụlọ ọrụ anyị ga-anwa iji belata ọnụ ahịa ịzụrụ ndị ahịa, belata oge ịzụrụ, ịdị mma ngwaahịa kwụsiri ike, mee ka afọ ojuju ndị ahịa wee nweta ọnọdụ mmeri.
By Agustin si Indonesia - 2018.02.08 16:45 Nnukwu oke, mma dị mma, ọnụ ahịa ezi uche na ọrụ dị mma, akụrụngwa dị elu, nka mara mma na ndị agha teknụzụ na-ewusi ike ， ezigbo onye mmekọ azụmahịa.
Site na Martin Tesch si Italy - 2018.06.26 19:27 
