Ọsọ ngwa ngwa Ccwdm Mux - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA

Nbufe ngwa ngwa CCwdm Mux - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Ngwaahịa anyị na-ọtụtụ ebe ghọtara na tụkwasịrị obi site ọrụ na ike izute nọgidere na-agbanwe akụ na ụba na-elekọta mmadụ mkpa nkeUsb2.0 Fiber Video Ntụgharị,Ntụgharị netwọkụ,Ip Igwefoto Poe Switch, Adhering ka azụmahịa enterprise nkà ihe ọmụma nke 'onye ahịa mbụ, forge n'ihu', anyị ji obi ụtọ na-anabata ndị na-azụ ahịa si n'ụlọ gị na mba ọzọ na-arụkọ ọrụ na anyị na-enye gị oké ọrụ!

Ọsọ ngwa ngwa Ccwdm Mux - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA Nkọwa:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC + 24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị waya, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Site na teknụzụ na akụrụngwa ọgbara ọhụrụ, njikwa mma siri ike, ọnụ ahịa ezi uche dị na ya, enyemaka pụrụ iche na imekọ ihe ọnụ na atụmanya, anyị etinyela aka n'inye ndị ahịa anyị ezigbo uru maka nnyefe ngwa ngwa Ccwdm Mux - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , The ngwaahịa ga-ezitere n'ụwa nile, dị ka: Norwegian, Guatemala, Qatar, N'oge na 11 afọ, Anyị abuana ke ihe karịrị Ihe ngosi 20, na-enweta otuto dị elu site n'aka onye ahịa ọ bụla. Companylọ ọrụ anyị na-etinye onye ahịa ahụ na mbụ wee gbaa mbọ na-enyere ndị ahịa aka ịgbasa azụmahịa ha, ka ha bụrụ nnukwu onye isi!

Ọ bụ ezie na anyị bụ obere ụlọ ọrụ, a na-asọpụrụkwa anyị. Àgwà pụrụ ịdabere na ya, ọrụ ezi obi na ezigbo kredit, anyị na-asọpụrụ inwe ike ịrụ ọrụ na gị!
Kpakpando 5