Nkọwa dị elu 4 Channel Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - JHA

Nkọwa dị elu 4 Channel Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Foto e gosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Site na teknụzụ anyị na-eduga n'otu oge ahụ mmụọ nke imepụta ihe ọhụrụ, imekọ ihe ọnụ, uru na mmepe, anyị ga-ewulite ọdịnihu ga-aga nke ọma n'akụkụ ibe gị na ụlọ ọrụ ị na-akwanyere ùgwù.Pdh ọtụtụ ọrụ modular,Audio 3g Sdi Fiber Ntụgharị,Ọnụ ụzọ Pdh, Maka ajụjụ ndị ọzọ ma ọ bụ ọ bụrụ na ị nwere ajụjụ ọ bụla gbasara ngwaahịa anyị, biko egbula ịkpọtụrụ anyị.

Nkọwa dị elu 4 Channel Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4

(ụdị 19 inch 1U)

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4
Nkọwa ọrụ	4E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Ụdị （Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	2.3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

N'ozuzu ndị ahịa-gbakwasara, na ọ bụ ihe mgbaru ọsọ anyị kacha maka ịbụ bụghị naanị ntụkwasị obi, ntụkwasị obi na onye na-eweta eziokwu, kamakwa onye mmekọ maka ndị ahịa anyị maka High definition 4 Channel Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4 (19 Inch 1U Type) - JHA , Ngwaahịa ahụ ga-enye ụwa niile, dị ka: Uganda, San Francisco, Norway, Anyị na-agbalị ime ka ndị ahịa nwekwuo obi ụtọ na afọ ojuju. anyị ji ezi obi na-atụ anya guzosie ike a ezi ogologo okwu azụmahịa mmekọrịta gị na-akwanyere ùgwù ụlọ ọrụ chere ohere a, dabere na hà, ibe uru na-emeri mmeri azụmahịa site ugbu a ruo n'ọdịnihu.