Ọdịmma E1+Ethernet Pdh Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA

Ọdịmma E1+Ethernet Pdh Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Site na teknụzụ na akụrụngwa ọkaibe, aka siri ike dị elu, uru ezi uche dị na ya, nkwado pụrụ iche na mmekorita chiri anya na ndị ahịa, anyị na-etinye aka n'ịkwado ndị ahịa anyị ezigbo ọnụ ahịa.4 Port 10/100/1000m eriri mgba ọkụ,Hdmi Ka Hdmi Cable,Ihe Ntụgharị Fiber Optical Media, Na anyị iwu nke obere azụmahịa eguzo, ibe ntụkwasị obi na ibe uru, welcome all of you to definitely do the job alongside one another , toto ọnụ.

Ọdịmma E1+Ethernet Pdh Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 - Nkọwa JHA:

16E1 PDH Fiber Multiplexer JHA-CPE16

Nchịkọta

Ngwaọrụ a na-enye 1-16 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE16
Nkọwa ọrụ	8E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Type ， (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 16 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

N'ịbụ ndị na-akwado otu ọkachamara IT dị elu na ọkachamara, anyị nwere ike inye nkwado teknụzụ na ọrụ pre-sales & mgbe-sales maka High Quality E1 + Ethernet Pdh Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 - JHA , Ngwaahịa ga-enye ndị niile. ụwa, dị ka: Luxemburg, Hanover, San Francisco, Ọtụtụ ngwongwo na-akwado nke ọma n'ụzọ siri ike nke ụkpụrụ mba ụwa na site na ọrụ nnyefe nke mbụ, ị ga-ebuga ha n'oge ọ bụla. oge na ebe ọ bụla. Na n'ihi na Kayo na-azụta akụrụngwa nchebe niile, ndị ahịa anyị agaghị egbusi oge ịzụ ahịa.

The factory ọrụ nwere ọgaranya ụlọ ọrụ ihe ọmụma na arụmọrụ ahụmahụ, anyị mụtara ọtụtụ ihe na-arụ ọrụ na ha, anyị nwere nnọọ ekele na anyị nwere ike ikwu na ezi ụlọ ọrụ nwere magburu onwe wokers.
Kpakpando 5