Aha dị elu 4 Channel Cwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m - JHA

Aha dị elu 4 Channel Cwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Otu anyị site na ọzụzụ ọkachamara. Ọmụma ọkachamara nwere nkà, mmetụta enyemaka siri ike, iji mezuo mkpa ndị na-eweta ndị na-azụ ahịaSFP 10g Sr,Ngwa anya Dwdm,Mgbanwe ụlọ ọrụ anaghị ejikwa SFp, Mmasị, Ime ihe n'eziokwu, Sound ọrụ, Keen imekọ ihe ọnụ na Development bụ ihe mgbaru ọsọ anyị. Anyị anọwo ebe a na-atụ anya ezigbo ndị enyi gburugburu ụwa!

Aha dị elu 4 Channel Cwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Nkwupụta ngwa ngwa ma dị oke mma, ndị ndụmọdụ ndụmọdụ ga-enyere gị aka ịhọrọ ngwa ahịa ziri ezi nke dabara na mmasị gị niile, obere oge okike, iwu mara mma na ụlọ ọrụ dị iche iche maka ịkwụ ụgwọ na mbupu okwu maka aha ọma 4 Channel Cwdm - 4E1 PDH Fiber Multiplexer JHA- CPE4m – JHA , The ngwaahịa ga-ezitere ụwa niile, dị ka: Portland, Juventus, Sheffield, All ndị ọrụ na factory, ụlọ ahịa, na ụlọ ọrụ na-agbasi mbọ ike maka otu ebumnuche nkịtị iji nye mma na ọrụ ka mma. Ezigbo azụmahịa bụ ịnweta ọnọdụ mmeri. Ọ ga-amasị anyị ịnyekwu nkwado maka ndị ahịa. Nabata ndị ahịa niile mara mma iji soro anyị kparịta nkọwa nke ngwaahịa anyị!