Ọhụrụ mbata China E1/Ethernet+8fx PCm Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Onye ahịa agba agba mbụ, ịdị mma dị elu nke mbụ n'uche, anyị na ndị ahịa anyị na-arụ ọrụ ahụ nke ọma ma na-enye ha ndị na-eweta ọrụ nke ọma na ndị nwere nkà.Ngbanwe 10g zuru ezu,USB Optical na-arụ ọrụ 3m,Obere-GBIC Optical Module, Na a dịgasị iche iche, ezi àgwà, ezi ụgwọ na nkecha aghụghọ, Anyị ngwaahịa na ngwọta na-ọtụtụ ebe ghọtara na tụkwasịrị obi site ọrụ na ike mezuo nọgidere na-agbanwe akụ na ụba na-elekọta mmadụ mkpa.

Ọhụrụ mbata China E1/Ethernet+8fx PCm Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA Nkọwa:

16E1 PDH Fiber Multiplexer JHA-CPE16

Nchịkọta

Ngwaọrụ a na-enye 1-16 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE16
Nkọwa ọrụ	8E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Type ， (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 16 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Na nke a motto n'uche, anyị aghọwo otu nke technologically ọhụrụ, na-eri-oru ọma, na price-asọmpi emepụta maka New mbata China E1/Ethernet+8fx PCm Mux - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA , Ngwaahịa ga-enye n'ụwa nile, dị ka: Zambia, Georgia, Melbourne, Anyị ụlọ ọrụ na-aga n'ihu na-ejere ndị ahịa na elu àgwà, asọmpi price na n'oge. nnyefe. Anyị ji ezi obi na-anabata ndị enyi si n'akụkụ ụwa niile ka ha na anyị na-arụkọ ọrụ na ịkwalite azụmahịa anyị. Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị, biko nweere onwe gị ịkpọtụrụ anyị. Ọ ga-amasị anyị ịnye gị ozi ndị ọzọ.

Ngwaahịa dị iche iche zuru oke, ezigbo mma na ọnụ ala, nnyefe ngwa ngwa na ụgbọ njem bụ nchekwa, ezigbo mma, anyị nwere obi ụtọ na anyị na ụlọ ọrụ a ma ama!
Kpakpando 5