OEM Factory maka Dual Fiber 10 / 100m - 16E1 PDH Fiber Multiplexer JHA-CPE16 - JHA
OEM Factory maka Dual Fiber 10 / 100m - 16E1 PDH Fiber Multiplexer JHA-CPE16 - JHA Nkọwa:
16E1 PDH Fiber Multiplexer JHA-CPE16
Nchịkọta
Ngwaọrụ a na-enye 1-16 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.
Foto ngwaahịa
Atụmatụ
- Dabere na ikike nwebiisinka IC
- Ihe nchọpụta ngwa anya dị obosara obosara modular
- Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
- E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
- Nye interface njikwa njikwa (RS232)
- Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
- Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
- Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
- Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
- AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
- DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.
Oke
♦Fiber
Multi-mode Fiber
50/125, 62.5/125,
Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)
Ogologo ebili mmiri: 820nm
Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)
Mmetụta nke nnata: -28dBm (Nkeji)
Ego njikọ: 16dBm
Otu ụdị Fiber
8/125, 9/125
Ogologo nnyefe kacha: 40Km
Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)
Ogologo ebili mmiri: 1310nm
Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)
Mmetụta nke nnata: -27dBm (Nkeji)
Ego njikọ: 18dBm
♦E1 interface
Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;
E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);
Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823
Attenuation ekwenyere: 0 ~ 6dBm
♦Ebe ọrụ
Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C
Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)
Okpomọkụ nchekwa: -40°C ~ 80°C
Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)
Nkọwapụta
| Nlereanya | Nọmba nlereanya: JHA-CPE16 |
| Nkọwa ọrụ | 8E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Type ， (Standard ekwentị interface, na-abụghị ekwentị ejiri) |
| Nkọwa Port | Otu ọdụ ụgbọ mmiri, 16 E1 interface (75/120 ohms), otu njikwa inferface |
| Ike | Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W |
| Akụkụ | Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH) |
| Ibu | 3KG/PCS |
Ngwa
Foto nkọwa ngwaahịa:
Ntuziaka ngwaahịa emetụtara:
Nkwupụta ngwa ngwa na ọmarịcha, ndị ndụmọdụ gwara gị ka ha nyere gị aka ịhọrọ ngwaahịa ziri ezi dabara na mkpa gị niile, obere oge nrụpụta, njikwa mma dị mma na ụlọ ọrụ dị iche iche maka ịkwụ ụgwọ na mbupu ihe maka OEM Factory for Dual Fiber 10/100m - 16E1 PDH Fiber Multiplexer JHA-CPE16 - JHA , Ngwaahịa ga-enye n'ụwa nile, dị ka: USA, New York, Tunisia, Na a dịgasị iche iche, ezigbo mma, ọnụ ahịa ezi uche dị na ya na atụmatụ mara mma, a na-eji ngwaahịa anyị eme ihe na mpaghara a na ụlọ ọrụ ndị ọzọ. Anyị na-anabata ndị ahịa ọhụrụ na ndị agadi si n'akụkụ niile nke ndụ ka ha kpọtụrụ anyị maka mmekọrịta azụmahịa n'ọdịnihu na inwe ihe ịga nke ọma n'otu n'otu! Anyị na-anabata ndị ahịa, ndị otu azụmahịa na ndị enyi si n'akụkụ niile nke ụwa ka ha kpọtụrụ anyị ma chọọ nkwado maka uru otu.
Site na Liz si Luxemburg - 2017.04.08 14:55 Onye nrụpụta a nwere ike ịnọgide na-emeziwanye ma na-emezi ngwaahịa na ọrụ, ọ dabara na iwu nke asọmpi ahịa, ụlọ ọrụ asọmpi.
Site na Eleanore si Wellington - 2018.11.04 10:32 
