OEM Factory maka Dual Fiber 10 / 100m - 4E1 + 4GE PDH Fiber Multiplexer JHA-CP48G4 - JHA

4E1+4GE PDHFiberMultiplexer

Nchịkọta

Ngwaọrụ a bụ ngwaọrụ nnyefe anya ruo n'ókè emepụtara na ndabere nke VLSI. Ngwaọrụ na-enye 1-4 * E1 interface, 1-4 * 10/100/1000M Ethernet interface (Wire Speed ​​1000M) na 2 mgbasawanye oghere. 4 * Ethernet interface bụ mgba ọkụ interface, nwere ike ịkwado VLAN. Enwere ike iji interface mgbasawanye 1 dị ka ọwa nnyefe nke RS232/RS485/RS422 data asynchronous, akara kọntaktị akọrọ, ekwentị azụmahịa dijitalụ 1Channel nwere ike ịbụ nhọrọ. Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

• Dabere na ikike nwebiisinka IC
• The eriri bandwit ruo 1.5G, Ethernet bandwit bụ Wire Speed ​​1000M
• Ọnụego interface Ethernet bụ 10/100/1000M, ọkara / zuru duplex Auto-Nego
• 4*Ethernet interface bụ mgbanwe interface, na-akwado VLAN, nwere ike ịtọ 4 ọwa ezi uche dị iche iche
• Nye interface njikwa njikwa (RS232)
• Nye abụọ eriri interface 1+1 chebe (APS) ọrụ
• E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
• Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
• Mgbe ngwa anya ida mgbaama, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri kwụsịrị, na-egosi mkpu site LED.
• Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
• Nye 2 mgbasawanye interface, ị nwere ike ịgbatị 1 ~ 2Channel asynchronous data, dị ka RS232/RS485/RS422/Manchester koodu;
• Nye iwu ihe ntanetị anya Loop Back, kwado ọrụ E1 Loop Back, na-akwado E1 LOS na AIS mkpu, na-edozi ahịrị dị mfe.
• Ebe nnyefe dị ihe ruru 2-100km na-enweghị nkwụsị
• Kwado onye njikwa SNMP (onye nnọchi anya SNMP n'ime)
• AC 220V, DC-48V, DC24V nwere ike ịbụ nhọrọ
• DC-48V/DC24V ike ọkọnọ ọrụ nchọpụta polarity, Polarity-free

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ntanetịime: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Interface Gigabit Ethernet (10/100/1000M)

Ọnụọgụ ihu: 10/100/1000M, ọkara / n'uju duplex akpaaka mkparita uka

Ọkọlọtọ Interface: Dakọtara na IEEE 802.3, IEEE 802.1Q (VLAN)

Ike adreesị MAC: 4096

Njikọ: RJ45, nkwado Auto-MDIX

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Ngwa