OEM Supply Fiber Optic Dwdm - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – JHA

16E1+ LCD Ngosipụta + SNMP JHA-C2P-E16bF4R2

PDH Fiber Multiplexer

Nchịkọta

Ngwaọrụ a nwere njikwa njikwa, na-enye 1 + 1 fiber back-up nchebe, na-atụ aka na-arụtụ anya nnyefe, LCD ngosi , na isi nke ụlọ ọrụ anyị mmepe nke PDH ngwa anya nnyefe, na-eji pụrụ iche VLSI na SNMP NMS.

Ngwaọrụ na-enye 1-16 * E1 interface, 1-4 * 10 / 100M Ethernet interface (Wire speed 100M) na 2 mgbasawanye interface. 4Channel Ethernet interface bụ mgba ọkụ interface, nwere ike ịkwado VLAN. Enwere ike iji interface mgbasawanye 2 dị ka ọwa nnyefe nke RS232/RS485/RS422 data asynchronous. Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha

Foto ngwaahịa

Atụmatụ

• Na-enye 16 E1 transperent nnyefe;
• Na char 16 * 2 LCD ngosi na onye nnọchi anya SNMP n'ime
• Nye interface njikwa njikwa (RS232)
• Nye abụọ eriri interface 1 + 1 chebe (APS) ọrụ, na ALS (Automatic Laser Shutdown / Mbelata)
• Enwere ike ịtọ ngwungwu nha Ethernet 1916 byte na ọdụ ụgbọ mmiri 4 Ethernet iche iche, yana bandwidth ethernet nwere ike ịtọ ntọala na otutu 32K.
• Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
• Nye eriri eriri abụọ, otu dị ka nna ukwu, nke ọzọ dị ka ohu, na-eme ka nnyefe ọrụ na-akwụsịghị akwụsị
• Ọnụ ọgụgụ nke ọdụ ụgbọ mmiri anya bụ 155Mbps, oke nnyefe nwere ike iru 25KM, 40KM, 60KM, 80KM ma ọ bụ 120KM;
• E1 interface koodu bụ HDB3, E1 njirimara ịma jijiji kwekọrọ na ITU-T G.703, G.823 na G.742;
• Ethernet ọdụ ụgbọ mmiri na-akwado zuru / ọkara duplex, 10 / 100M auto-Nego;
• ọdụ ụgbọ mmiri Ethernet na-akwado ọrụ VLAN ma nwee ọnọdụ nhazi 4 maka nhọrọ onye ọrụ;
• Nwere ọrụ mkpu zuru ezu ma nwee ike nyochaa ọkwa ngwaọrụ dịpụrụ adịpụ;
• Na-akwado abụọ Fiber Loop-back, na anọ E1 loop-back mode, ma jikwaa ngwaọrụ nke ọma;
• onye ọrụ configurable isi mkpu na obere mkpu, ngosi na LCD na ụda mkpu na ọkà okwu;
• AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
• DC-48V/DC+24V ike ọkọnọ ọrụ nchọpụta polarity, Polarity-free

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ethernet interface (10/100M)

Ọnụọgụ ihu: 10/100Mbps, nkwurịta okwu akpaaka ọkara / zuru ezu

Ọkọlọtọ Interface: Dakọtara na IEEE 802.3, IEEE 802.1Q (VLAN)

Ike adreesị MAC: 4096

Njikọ: RJ45, nkwado Auto-MDIX

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Ngwa