OEM Supply Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA

OEM Na-ebunye Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Anyị hụrụ ọnọdụ dị egwu n'anya n'etiti ndị na-azụ ahịa anyị maka ọmarịcha ihe anyị dị oke mma, ọnụego ike ike yana enyemaka makaNtụgharị 16e1 Ka 4ethernet,1ch Sdi Fiber Video Ntụgharị,4 Port Mini Desktop 10/100m Ethernet SwitchN'ịbụ onye na-eto eto na-eto eto na-eto eto, anyị nwere ike ọ bụghị na , ma anyị a na-agbalị anyị maka ịbụ gị ezigbo onye mmekọ.

OEM Supply Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA Nkọwa:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Mmefu ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Were ọrụ zuru oke iji gboo mkpa niile nke ndị ahịa anyị; nweta ọganihu na-aga n'ihu site n'ịkwado mgbasawanye nke ndị na-azụ anyị; tụgharịa n'ime ikpeazụ na-adịgide adịgide cooperative partner of clientele and maximize the interest of clients for OEM Supply Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Lahore, Victoria, Botswana , N'elu taa, anyị nwere ndị ahịa si n'ụwa nile, gụnyere USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran na Iraq. Ebumnuche nke ụlọ ọrụ anyị bụ ịnye ngwaahịa dị elu na ọnụ ala dị ala. Anyị na-atụ anya iso gị na-azụ ahịa!