Onye nrụpụta OEM/ODM PCm 30 - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA

Onye nrụpụta OEM/ODM PCm 30 - 16E1 PDH Fiber Multiplexer JHA-CPE16 – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Ụlọ ọrụ anyị nke ọma na nnukwu iwu magburu onwe ya n'oge niile nke ọgbọ na-enyere anyị aka ịkwado mmezu nke ndị ahịaNtụgharị anya,8 Ports Poe Switch,SFP 10km, Ịnabata ụlọ ọrụ ndị nwere mmasị ka ha na-arụkọ ọrụ na anyị, anyị na-atụ anya inwe ohere nke ịrụ ọrụ na ụlọ ọrụ gburugburu ụwa maka ọganihu nkwonkwo na ihe ịga nke ọma.

Onye nrụpụta OEM/ODM PCm 30 - 16E1 PDH Fiber Multiplexer JHA-CPE16 - Nkọwa JHA:

16E1 PDH Fiber Multiplexer JHA-CPE16

Nchịkọta

Ngwaọrụ a na-enye 1-16 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE16
Nkọwa ọrụ	8E1 PDH ， ịtụ ekwentị waya, 19 inch 1U Type ， (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 16 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

All anyị na-eme na-emekarị affiliated na anyị tenet Buyer na-amalite na, Nkwenye na-amalite na, devoting banyere nri nkwakọ na gburugburu ebe obibi agbachitere maka OEM/ODM emeputa PCm 30 - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA , The ngwaahịa ga-enye n'ụwa nile, dị ka: Paris, Malawi, Guatemala, Nzukọ anyị. N'ịbụ nke dị n'ime obodo mepere emepe nke mba, ndị ọbịa ahụ dị mfe, ọnọdụ ala na ọnọdụ akụ na ụba pụrụ iche. Anyị na-achụso ndị mmadụ gbadoro ụkwụ, rụpụta ọrụ nke ọma, mgbakasị uche, na-ewu nzukọ mara mma. hilosophy. Nlekọta dị elu siri ike, ọrụ obi niile, ọnụ ahịa ezi uche dị na Myanmar bụ nguzo anyị na ntọala asọmpi. Ọ bụrụ na ọ dị mkpa, nabata ịkpọtụrụ anyị site na ibe weebụ ma ọ bụ ndụmọdụ ekwentị, ọ ga-abụrịrị na obi dị anyị ụtọ ijere gị ozi.

Ụlọ ọrụ ahụ nwere ike iche ihe anyị chere, ngwa ngwa nke ngwa ngwa ime ihe maka ọdịmma nke ọnọdụ anyị, enwere ike ịsị na nke a bụ ụlọ ọrụ na-ahụ maka ọrụ, anyị nwere obi ụtọ imekọ ihe ọnụ!
Kpakpando 5