Fiber Optic N'ogbe - Modular multi-service Fiber MUX JHA-C2PM-E16 – JHA
Fiber Optic N'ogbe - Modular multi-service Fiber MUX JHA-C2PM-E16 - Nkọwa JHA:
Modular multi-ọrụ Fiber MUX JHA-C2PM-E16
Nchịkọta
Ngwaọrụ a bụ akụrụngwa nnyefe ngwa anya ruo n'isi nwere ihe ngosi LCD, na-eji ibe FPGA ma dịkwa mfe iji kwalite. Ụlọ ọrụ Main na-enye 4 * 100M ọwa Ethernet data na 2 AUX ọdụ ụgbọ mmiri nke bụ maka ịnyefe data ndị ọzọ dị ka RS232/RS485/RS422, abụọ ngwa anya interface maka nhọrọ 1+1 auto nchedo mgba ọkụ (APS).
4 oghere nke tributary na variant plug-in modul nke gụnyere 4xE1 ọwa modul, 4/8/16 x FXO / FXS modul na 2x Nx64K V.35 modul. The kacha ike ga-elu 4 plug-in modul nke nwere ike ịbụ nchikota na n'elu modul. Mgbanwe dị elu, arụmọrụ, bụ ngwọta kachasị mma maka ọrụ olu / data / vidiyo na ahịa dị adị.
Foto ngwaahịa
Ụdị Desktop
Atụmatụ
- Na-enye mkpokọta 16 E1 transperent nnyefe ikike;
- Na char 16 * 2 LCD ngosi na onye nnọchi anya SNMP n'ime.
- Nye interface njikwa njikwa (RS232)
- Nye otu ọwa hotline maka nhọrọ;
- Nye eriri eriri SFP abụọ, otu dị ka nna ukwu, nke ọzọ dị ka ohu, na-eme ka nnyefe ọrụ anaghị akwụsị akwụsị.
- Ọnụ ọgụgụ nke ọdụ ụgbọ mmiri anya bụ 155Mbps, oke nnyefe nwere ike iru 25KM, 40KM, 60KM, 80KM ma ọ bụ 100KM;
- Nye abụọ eriri interface 1 + 1 chebe (APS) ọrụ, na ALS (Automatic Laser Shutdown / Mbelata)
- Nye 4 oghere nkwụnye modul:
♦ 4 × unFramed E1 modul (75Ω)/（120Ω）
♦ 4 × Framed E1 modul (75Ω)/（120Ω), enwere ike ịtọ oge oge ọ bụla.
♦ 4×FXO/FXS/EM2-4/modul ekwentị magnet
♦ 8 × FXO/FXS/2 ahịrị audio/modul ekwentị magnet
♦ 16 × FXO/FXS/2 ahịrị audio/modul ekwentị magnet
♦ 2 × V.35 (2.048M Obere ọsọ) modul
♦ 2 × V.35 (N * 64K N = 1-32) modul
♦ 4 × RS232/422/485 modul
♦ 4 * FE ka E1 akwa (waya ọsọ 2.048M) modul
- Nye 4FE (waya ọsọ 100M) ọwa Ethernet, na-akwado mkparịta ụka ibe, Ethernet bandwit atọrọ na isi na otutu nke 32K .;
- Ọdụ ụgbọ mmiri Ethernet na-akwado duplex zuru oke / ọkara, 10M / 100M na-emegharị onwe ya;
- ọdụ ụgbọ mmiri Ethernet na-akwado ọrụ VLAN ma nwee ọnọdụ nhazi 4 maka nhọrọ onye ọrụ;
- Enwere ike ịtọ ntọala nha nke Ethernet 1916 byte na ọdụ ụgbọ mmiri Ethernet iche iche;
- Nwere ọrụ mkpu zuru ezu ma nwee ike nyochaa ọkwa ngwaọrụ dịpụrụ adịpụ;
- Na-akwado loop E1 site na ime ime ka ịchọpụta na jikwaa ngwaọrụ nke ọma;
- Ngwakọta AC220V na DC-48V maka ejighi oru
Oke
♦Fiber
Multi-mode Fiber
50/125, 62.5/125,
Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)
Ogologo ebili mmiri: 820nm
Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)
Mmetụta nke nnata: -28dBm (Nkeji)
Ego njikọ: 16dBm
Otu ụdị Fiber
8/125, 9/125
Ogologo nnyefe kacha: 40Km
Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)
Ogologo ebili mmiri: 1310nm
Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)
Mmetụta nke nnata: -27dBm (Nkeji)
Mmefu ego njikọ: 18dBm
♦E1 interface
Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;
E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);
Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823
Attenuation ekwenyere: 0 ~ 6dBm
♦Njikọ Ethernet (10/100M)
Ọnụọgụ ihu: 10/100Mbps, nkwurịta okwu akpaaka ọkara / zuru ezu
Ọkọlọtọ Interface: Dakọtara na IEEE 802.3, IEEE 802.1Q (VLAN)
Ike adreesị MAC: 4096
Njikọ: RJ45, nkwado Auto-MDIX
♦Ngwa ekwentị FXS
Voltage mgbanaka: 75V
Ugboro mgbanaka: 25HZ
Mgbochi ahịrị abụọ: 600 Ohm (bulie)
Nlaghachi azụ: 40 dB
♦FXO Gbanwee Interface
Mgbanaka chọpụta voltaji: 35V
Ugboro nchọpụta mgbanaka: 17HZ-60HZ
Mgbochi ahịrị abụọ: 600 Ohm (bulie)
Nlaghachi azụ: 40 dB
♦N'ahịrị 2/4
AD: 0dB
DA: -3.5dB
Mgbochi ahịrị abụọ / anọ: 600 Ohm
Nlaghachi: 20dB
♦Ebe ọrụ
Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C
Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)
Okpomọkụ nchekwa: -40°C ~ 80°C
Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)
Nkọwapụta
| Nlereanya | Nọmba nlereanya: JHA-C2PM-E16 |
| Nkọwa ọrụ | LCD PDH, 4FE, Na 4 multifunction ohere mpere, na ALS ọrụ ， Console na SNMP ， 1 + 1 ndabere Optic eriri |
| Nkọwa Port | 1 + 1 ọdụ ụgbọ mmiri, oghere 4 multifunction, 4 FE interfaces, 1 * RS232 Console interface, 1 * SNMP Ethernet interface, otu injinia usoro-waya interface ekwentị |
| Ike | Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W |
| Akụkụ | Nha ngwaahịa: 216X140X31mm(WXDXH) |
| Ibu | 3KG/PCS |
Ngwa
Motherboard na-enye:
1. Ngosipụta LCD;
2.4-ọwa waya-ọsọ 100M kesara ọwa Ethernet;
3.2- ọwa RS232 / 422/485 asynchronous ọwa;
4.1 ọwa ekwentị ọha
5. Njikwa netwọk SNMP
4 oghere, na-akwado ntinye agwakọta, nye:
4 × E1 modul (75Ω) / (120Ω)
4 × Framing E1 modul (75Ω) / (120Ω), ị nwere ike ịtọ oghere oge aka ike
4 × FXO / FXS / EM2-4 / modul magnet
8 × FXO / FXS / 2 waya audio / magnet modul
16 × FXO / FXS / 2 waya audio / magnet modul
2 × V.35 (2.048M ọnụego edoziri) modul
2 × V.35 (N * 64K N = 1-32) modul
4 × RS232 / 422/485 / modul gbanwee
4 Ethernet akwa (ọnụego 2.048M) modul
Dị ka n'elu, ọ bụrụ na ịchọrọ ịrụ ọrụ ekwentị 8E1 + 4FE + 32 (FXO / FXS), ị nwere ike hazie kaadị 4E1 abụọ, kaadị ekwentị 16xFXO / S abụọ.
Foto nkọwa ngwaahịa:
Ntuziaka ngwaahịa emetụtara:
Anyị nwere ugbu a ọtụtụ oké personel òtù ọma na mgbasa ozi, QC, na-arụ ọrụ na iche iche nke nsogbu dilemma si e kere eke N'ezie nke edinam n'ihi na N'ogbe Fiber Optic - Modular multi-ọrụ Fiber MUX JHA-C2PM-E16 – JHA , The ngwaahịa ga-ezitekwara ka n'ụwa nile, dị ka: Hongkong, Kazan, Portugal, Ebe ọ bụ na mgbe niile, anyị na-agbaso oghe na mma, òkè iji nweta, nchụso nke kacha mma, na ihe e kere eke. nke uru bara uru, na-agbaso iguzosi ike n'ezi ihe na ịrụ ọrụ nke ọma, na-azụ ahịa, ụzọ magburu onwe ya, nkà ihe ọmụma azụmahịa valvụ mara mma. Ọnụ na anyị niile n'ụwa nwere alaka na mmekọ ịzụlite ọhụrụ azụmahịa ebe, kacha nkịtị ụkpụrụ. Anyị na-anabata nke ọma na ọnụ anyị na-ekere òkè na akụ ụwa, na-emepe ọrụ ọhụrụ ọnụ na isiakwụkwọ.
Site na Kitty si Hongkong - 2017.01.11 17:15 Enwere ike ikwu na nke a bụ onye nrụpụta magburu onwe ya anyị zutere na China na ụlọ ọrụ a, anyị na-enwe obi ụtọ na anyị na-arụ ọrụ na-emepụta ihe magburu onwe ya.
Site na Nicola si Egypt - 2017.08.18 18:38 
