Leave Your Message
Products Categories
Featured Products

L3 Managed Industrial Ethernet Switch with 8 10/100/1000TX M12 Connector | JHA-MIG08H-M12

 L3 8 port Managed Industrial Ethernet Switch with M12 connector

    product detail

    JHA-MIG08H-M12 Provides 8 Gigabit M12 interfaces (POE function is optional), the product complies with the requirements of EN50155 and EN50121 industry standards.POE power supply complies with IEEE 802.3af/at protocol standards. The Ethernet interface adopts the solid and reliable M12 format, which can be applied to the use of severe vibration and shock scenes. Adopting 1U rack mounting mode, it can meet the needs of different application sites. The hardware adopts fanless, low power consumption, wide temperature and voltage design, and passes the strict test in line with the industry standard, which can be widely used in vehicle PIS, CCTV, video surveillance, train control and other systems. It adopts self-developed JHA-RING ring technology (network failure self-healing time <20ms), users can easily set up a redundant ring network to increase network reliability, in addition to supporting CLI, SNMP, WEB, VLAN management, Console/Telnet command line management. Rich QoS features for data traffic control and management, support for ring protocol, RSTP, and STP Ethernet redundancy, support for port-based VLANs, IEEE 802.1Q VLANs, and GVRP negotiation. The product also adopts fanless, low-power, industrial-grade design to adapt to harsh industrial environments, with -40 to 85°C operating temperature range, which can meet the requirements of various industrial sites and provide economical solutions. It can be widely used in vehicle PIS, CCTV, video surveillance, train control and other systems.

    *8 10/100/1000Base-TX adaptive Ethernet M12 interfaces
    *Support IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3af/at standards
    *Support CLI, SNMP, WEB, VLAN management, Console/Telnet command line management, using self-developed ring technology, network self-healing time <20ms
    *DC10-58V wide-voltage dual power supply redundancy backup, with anti-reverse connection protection function
    *With four-level lightning protection chip design, it can effectively resist lightning strikes below 8kV, and anti-static up to 8-15kV
    *All industrial-grade materials, IP40 protection level, low power consumption, industrial-grade design: -40 to 85 ℃ working temperature
    *Corrugated high-strength aluminum alloy shell, DIN rail mounting
    *Passed the Ministry of Public Security inspection report, CCC, FCC, CE, RoHS
    *Support PoE expansion, IEEE802.3af: maximum power 15.4W, IEEE802.3at: maximum power 30W

    Interface

    Interface

    Gigabit M12: 10/100/1000Base-T(X), M12 (Female)

    Support POE function, single POE port supports 30W output power, POE total power support up to 240W

    Power connector

    M12

    Indicators

    Power Indicator: PWR (green);

    System Indicator: SYS (green);

     Network Port Indicator: Yellow (1000 or POE) Green (Link)

    Network Topology & Sizing

    Ring Topology

    Support

    Star Topology

    Support

    Bus Topology

    Support

    Tree Topology

    Support

    Hybrid Topology

    Support

    Cable type and distance

    Twisted pair

    0-100m (CAT5e, CAT6)

    Single mode fiber

    20/40/60/80/100KM

    Multimode fiber

    550m/2KM

    Fiber interface

    LC/SC

    Electrical characteristics

    Input voltage

    DC10-58V/AC 100-240V 50-60HZ

    Power consumption

    Non-POE full load (Total power) <10W

    POE full load <132W

    PoE support optional

    PoE ports

    1-8

    PoE protocol

    802.3af, 802.3at

    PoE pin assignment

    1,2,3,6

    PoE management mode

    Support

    Layer 2

    Switching Capacity

    64Gbps

    Packet Forwarding Rate

    47.6Mpps

    MAC Address Table

    16K

    Vlan

    4K

    Packet Butter

    12Mbit

    Forwarding delay

    <10us

    Port features

    Cross-connection and direct connection adaptation

    Flow control

    Support

    Jumbo frame Support                        

    10Kbytes

    Spanning tree protocol

    Support STP/RSTP/MSTP

    Ring network protocol

    Support ERPS

    Link aggregation

    Support 12 groups

    Multicast

    Support IGMP Snooping

    Port mirroring

    Support

    Storm suppression

    Support

    Port traffic statistics

    Support

    QINQ

    Support

    EMC Standards

    EN61000-4-2 Anti-static (ESD): ±8kV contact discharge, ±15kV air discharge

    EN61000-4-3 Electromagnetic field: 10V/m (80-1000MHz)

    EN61000-4-6 Anti-conduction: 3V (10kHz~150 kHz), 10V (150kHz~80 MHz)

    EN55022: EN55022 Class A

    EN61000-4-2 Anti-static (ESD): ±8kV contact discharge, ±15kV air discharge

    Aggregation Services

    ACL

    Support 500 ACLs;

    Support IP standard ACL;

    Support MAC extended ACL;

    Support IP extended ACL;

    QoS

    Support QoS re-marking, priority mapping;

    Support SP, WRR queue scheduling;

    Support ingress speed limit, egress speed limit;

    Management Features

     

    Command line

    Support

    Management serial port

    Support

    Telnet        

    Support

    WEB management

    Support

    SNMP

    Support SNMPv1/v2c

    User management

    Support

    System log

    Support 

    File upgrade

    Support

    SFP module DDM

    Support

    Physical& Environment

    Operating temperature

    -40℃~+85℃

    Storage/transportation temperature

    -40℃~+85℃

    Relative humidity

    5%~95% Non-condensing

    Cooling method

    Fanless design, natural heat dissipation

    MTBF

    100,000 hours

    Dimensions 440X250X44.5mm

    440X250X44.5mm

    Installation method

    1U 19-inch rack installation All-aluminum alloy material

    Weight

    2.8KG

    5.png

    Model Number

    Description of Goods

     

    JHA-MIG08H-M12

    Managed Industrial Ethernet Switch,

    8*10/100/1000BASE-T(X) M12 Port(poe optional) D-Coding, 4 PinMale cable connector 1U rack mount