E1-8 Channel RS232/RS422/RS485 Converter JHA-CE1D8/R8/Q8 Overview Hoʻokumu ʻia kēia mea hoʻololi hoʻololi ma luna o FPGA, e hāʻawi ana i ka hoʻouna ʻana iā 8Channel RS232/485/422 ma ke kikowaena E1. Hoʻokaʻawale ka huahana ma o nā kūʻē ma waena o ka mamao o ke kamaʻilio serial interface a me ka helu kamaʻilio, ʻokoʻa, hiki iā ia ke hoʻonā i ka hoʻopili electromagnetic, ke komo ʻana o ke apo honua a me ka pōʻino uila. Hoʻomaikaʻi nui ka mea hana i ka hilinaʻi, palekana a me ka hūnā o ka kamaʻilio ʻikepili. Hoʻohana nui ʻia ia no nā ʻano ʻenehana like ʻole, ka mālama ʻana i ke kaʻina hana a me nā manawa hoʻokele kaʻa, ʻoi aku hoʻi no ka Bank, a me Power a me nā ʻāpana ʻē aʻe a me nā ʻōnaehana i loaʻa nā koi kūikawā o ke kaiapuni electromagnetic interference. Hiki iā RS232/RS485/RS422 ke hoʻoili i ka ʻikepili serial adaptable asynchronously 0Kbps-57600Kbps baud rate. Huahana Kiʻi Kiʻi ʻano liʻiliʻi 19 ʻīniha 1U ʻAno Nā hiʻohiʻona Ma muli o ke kākoʻo IC ponoʻī iā ia iho 3 laina RS232 (TXD,RXD,GND), kākoʻo no ka mana kahe CD, DSR, CTS Loaʻa ʻekolu Loop Back Mode: E1 interface Loop Back (ANA)、RS232 /485/422 interface Loop Back(DIG)、E kauoha i ke kikowaena RS232/485/422 mamao Loop Back(REM) Kākoʻo ʻo RS232/RS485/RS422 i ka plug wela, kākoʻo i ka DTE a i ʻole DCE mea pili pili RS232/RS485/RS422 channel hiki ke hoʻouna i ka ʻikepili serial adaptable asynchronously 0Kbps-57600Kbps baud rate Loaʻa i ka pseudo random code test function, wehe maʻalahi ka laina, hiki ke hoʻohana ʻia ma ke ʻano he 2M. Ua hōʻea ʻo BER Tester Serial port interface i ka pale uila IEC61000-4-5 (8 / 20μS) DM (Keʻanoʻokoʻa): 6KV, Impedance (2 Ohm), CM (Maʻamau Maʻamau): 6KV, Impedance (2 Ohm) maʻamau Hāʻawi i 2 impedances: 75 Ohm unbalance a me 120 Ohm kaulike; Hiki iā ia ke hana i ka E1 serial converter (A) --- E1 fiber optic Modem (B) --- fiber serial Modem (C) topology AC 220V, DC-48V, DC+24V, DC Power and Polarity-Free Parameters ♦ E1 interface Kūlana Interface: hoʻokō me ka protocol G.703; Ka helu o ka Interface: 2048Kbps±50ppm; Code Interface: HDB3; Impedance: 75Ω (ke kaulikeʻole), 120Ω (kaulike); ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823 i ʻae ʻia i ka Attenuation: 0~6dBm ♦ Serial interface Standard EIA/TIA-232 RS-232 (ITU-T V.28) EIA/TIA-422 RS-422 (ITU -T V.11) EIA/TIA-485 RS-485 (ISO/IEC8284) Serial Interface RS-422: TXD+, TXD-, RXD+, RXD-, Hōʻailona Ground RS-485 4 uea: TXD+, TXD-, RXD+, RXD-, Hōʻailona Ground RS-485 2 uea: ʻIkepili+(Pono TX+), ʻIkepili-（ Pili TX-）, Hōʻailona Ground RS-232: RXD, TXD, Hōʻailona Ground ♦ Kaiapuni hana Ka mahana hana: -10°C ~ 50°C Ka haʻahaʻa hana: 5%~95 % (ʻaʻohe condensation) Ka mahana mālama: -40°C ~ 80°C Waihona haʻahaʻa: 5%~95 % ( ʻaʻohe condensation) Nā kikoʻī Helu kumu hoʻohālike: JHA-CE1D8/R8/Q8 Hōʻike Hana Hana E1-8RS232/422/485 Mea hoʻololi, hāʻawi i ʻekolu mau kikowaena koho ， Hoʻohana ʻia i nā pālua, Serial port rate a hiki i 56.7Kbps Port Description Hoʻokahi E1 interfaces, 8 data interface Mana lako mana: AC180V ~ 260V;DC –48V;DC +24VPower : ≤10W Ana Nui Huahana: ʻAno liʻiliʻi 216X140X31mm (WXDXH),1.3KG/'āpana 19'īniha 1U 'ano 483X138X44mm (WXDXH),2.0KG/'āpana Ho'ohana ma'amau 1 Ha'ina ma'amau 2

16*E1 i 3x1000Base-TX+2x1000Base-X JHA-CE16G3F2 Interface Converter Overview ʻO ka mea hoʻohana e hoʻohana ana i ka ʻenehana hoʻololi ʻana i ka ʻaoʻao hoʻohuli e hoʻopili i nā E1 lehulehu e hoʻouna i ka ʻikepili Ethernet o 3Channel 1000BASE-TX a me 2x1000Base-X. Hiki iā ia ke hoʻomaopopo i ka hoʻololi ʻana o 1 ~ 16 E1 ma waena o ka Ethernet optical interface, e hana i nā kahawai E1 e pili pū me ka Ethernet optical interface. Ke hoʻohana nei i ka encapsulation GFP, kākoʻo i ka LCAS (link capacity adjustment scheme) a me ka protocol LAPS. hiki i kēia hāmeʻa ke kākoʻo i ka hoʻonohonoho ʻana o ka channel 1-16Channel E1, hiki ke ʻike i ka helu o E1 a koho i ka E1 i loaʻa. Hāʻawi ia i ka manawa hoʻouna laina E1, hoʻokahi laina laina 1984Kbit/s, 4channe Ethernet bandwidth ʻo 7936Kbit/s, 8channel bandwidth ʻo 15872 Kbit/s, 16channel bandwidth hiki ke loaʻa 31744Kbit/s. Hāʻawi ka hāmeʻa i ka hana alarm. Pono ka hana, kūpaʻa, a me ka hoʻohana haʻahaʻa haʻahaʻa, hoʻohui kiʻekiʻe, liʻiliʻi liʻiliʻi. Kākoʻo i ka hoʻokele SNMP Network. Kiʻi Huahana 19 ʻInch 1U Type Features Ka hoʻouna ʻana i ka ʻikepili Ethernet ma 1 a 16 E1 kaʻapuni; Hiki ke hoʻolako ʻia me ʻelima Ethernet hoʻololi uila uila no ka mea hoʻohana e mālama i kahi hoʻololi Ethernet; Kākoʻo 1000Base-TX 10/100/1000M, piha piha / hapalua duplex hoʻololi piha, kākoʻo i ka protocol VLAN; Kākoʻo kēlā me kēia awa i ke kākoʻo ʻo Ethernet AUTO-MDIX (ke kaula crossover a me ka hoʻoponopono laina pololei); 16-channel E1 laina, hiki i ka 220ms ka lōʻihi lōʻihi ma waena o nā mea ʻelua; i ka wā e ʻokoʻa ai ka lohi ma luna o 220ms, e hoʻopuka ka lohi i ka alarm overrun maikaʻi ʻole, ʻoiai ke hoʻopau ʻia ka ʻoihana; Kūkulu ʻia ka papa inoa helu helu Ethernet MAC (4096), me ka hana kānana ʻikepili kūloko; Hoʻopili ʻo E1 interface me ITU-T G.703, G.704 a me G.823, ʻaʻole kākoʻo i ka hoʻohana ʻana i nā kau hōʻailona; ʻO ke ʻano manawa, ke koho manawa kūloko a me ka nānā ʻana i ka manawa laina E1, hiki ke hoʻololi ʻia ke kumu manawa laina E1 e like me ka maikaʻi o ka hōʻailona. E like me ka ʻōnaehana kumu manawa laina E1 no ke Alanui E1 mua, i ka wā o ka hāʻule mua ʻana o ka E1 ( ʻōlelo aʻo koʻikoʻi LOS / AIS / LOF / CRC4 a i ʻole ka hoʻokumu ʻana i ka loopback) a ke hana pono nei ke ala ʻelua ʻo E1, e hoʻololi koke ka ʻōnaehana i ke ala. ʻO ke alanui ʻelua E1; ka hoʻopau ʻana i ka hewa, a laila hoʻi hou ka ʻōnaehana i ke ala ala mua E1; Hoʻokō me ka protocol maʻamau ITU-T, GFP-F encapsulation manaʻo G.7041, VCAT virtual concatenation a me LCAS Link Capacity Adjustment manaʻo G.7042, Ethernet mapping to nxE1 paipai G.7043, Ethernet i hoʻokahi E1 palapala manaʻo G. 8040; Ke piʻi ka bandwidth hoʻouna, ʻaʻole ia e hōʻino i ka ʻikepili Ethernet; hoʻemi ʻia ka bandwidth transmission, hiki ke ʻike ʻia me ka ʻole o ka hōʻino ʻana i ka ʻikepili Ethernet; ʻAʻole like paha nā hopena o E1 tributary Ø me ka pili serial; Ke hāʻule ka ʻaoʻao paheʻe hoʻokahi E1, hiki ke hana ka ʻaoʻao ʻē aʻe; E1 hōʻailona loop hoʻi a ʻoki i ka hana ʻike ʻakomi: I ka ʻike ʻana i ke ʻano o kahi ala E1 hōʻailona loop, ʻoki ka ʻōnaehana i kēia E1; Hoʻokuʻu ʻia ka loopback, hoʻohana ʻo E1 i kēia ala; Hoʻopau i ka hōʻailona hōʻailona, ​​​​koho e hōʻike i ka alarm kūloko / mamao; Kākoʻo i ka hana loopback ʻaoʻao mamao E1 e hoʻomaʻamaʻa i ka hoʻāʻo ʻana i nā laina E1; Kākoʻo i ka ʻōnaehana kūloko no ka hoʻonohonoho ʻana i ka ʻōnaehana mamao; hāʻawi i ke kauoha loopback interface mamao, maʻalahi i ka mālama laina; Hāʻawi ke kikowaena hoʻokele console no ka wehe maʻalahi o ka hoʻonohonoho; Kōmike hoʻonohonoho pūnaewele hoʻonohonoho, kākoʻo i ka hoʻokele pūnaewele SNMP kūʻokoʻa; me kēia hopena i ka nānā ʻana i ke kūlana hana o ka hana hōʻike hāmeʻa mamao; Nui nā koho mana mana: AC220V, DC-48V / DC24V a me nā mea like; DC-48V / DC24V lako mana me ka hana ʻike polarity maʻalahi, ke kau ʻia me ka ʻole o ka ʻokoʻa ma waena o ka maikaʻi a me ka maikaʻi ʻole. Nā Palena ♦ E1 Interface E1 interface protocol: ITU-T G.703, Ka helu o ka Interface: 2048Kbps±50ppm Code Interface: HDB3; E1 Impedance: 75Ω (unbalance L9), 120Ω (kaulike RJ45); ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823 i ʻae ʻia ka Attenuation: 0~6dBm ♦ 10/100/1000M 1000Base-TX Interface Interface rate: 10/100Mbps, half/full duplex auto-negotiation Interface Standard: Compatible Interface IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Hiki: 4096 Connector: RJ45, kākoʻo Auto-MDIX ♦ 1000Base-X Ethernet Optical Interface Wave Length: 1310nm, 1550nm Interface rate: 1000M, piha duplex Interface Standard: E like me IE020BEE. LX MAC Hiki i ka helu wahi: 4096 Mea Hoʻohui: FC/SC Fiber Transmission Distance i kaupalena ʻia e ka nalowale kaapuni ʻike a me nā poho hou aʻe ma muli o nā mea hoʻohui, nā mea pono a me ka panel patch. Hiki ke kaupalena ʻia ka mamao o ka hoʻouna ʻana e ka bandwidth fiber optic. ♦ Ka Hana Hana Hana wela: -10 ° C ~ 50 ° C Ka Hana Hana: 5% ~ 95 % (ʻaʻohe condensation) Keʻena mālama mālama: -40 ° C ~ 80 ° C Waihona Haʻahaʻa: 5% ~ 95 % (ʻaʻohe condensation) MTBF ： ＞ 100,000 hola Hōʻike kikoʻī JHA-CE16G3F2 wehewehe hana 16E1-3x1000base-tx a me 2x1000base-x Converter , Hiki ke hoʻokaʻawale ʻia ʻo Ethernet i ka hoʻokaʻawale logical, Encapsulated me GFP package, kākoʻo i ka protocol LCAS a me LAPS, kākoʻo i ka hoʻokele pūnaewele SNMP kūʻokoʻa; Hōʻike Port 3x1000base-tx a me 2x1000base-x Ethernet interface; 16*E1 Interface, hoʻokahi Console a me hoʻokahi SNMP Port Power AC90V ~ 260V; DC –48V/+24V(Hō koho); Hoʻohana Mana: ≤5W Ana 485 (lōʻihi) X 138 (ākea) X44 (kiʻekiʻe) mm (19 ʻīniha 1U Type) Kaumaha 1.8Kg/Pcs(19 ʻīniha 1U Type) Noi

E1-4FE mea hoʻololi hoʻololi JHA-CE1fF4p （Physical lsolation） Manaʻo Kūlana kēia mea hoʻololi hoʻololi ma FPGA. Hiki ke hoʻomaopopo i ka lawe ʻana i ka ʻikepili 4Channel Ethernet ma luna o 1E1 kaapuni, hāʻawi i nā mea hoʻohana me ke komo Ethernet ma ka helu o 1984K. Hoʻohana nui ʻia ia i nā keʻena kālā, nā palekana a me nā keʻena palekana e pono e hāʻawi ʻia i ʻelua mau pūnaewele ʻokoʻa, a hiki ke hoʻokaʻawale loa ʻia nā mea ʻelua ma kahi pūnaewele kino. No ka laʻana, ʻaʻole hiki ke hoʻopili ʻia ka ʻoihana ʻoihana ʻoihana kālā, ka ʻoihana kūloko a me ka ʻoihana ʻoihana. Hiki i kēia multiplexer interface ke hoʻoponopono i kēia pilikia. Huahana Kiʻi Kiʻi ʻano liʻiliʻi 19 ʻīniha 1U ʻAno hiʻohiʻona Ma muli o ke kuleana kope ponoʻī IC Hiki ke hoʻomaopopo i ka hoʻouna ʻana i ka ʻikepili 4Channel Ethernet ma 1 E1 kaapuni Inter-set dynamic Ethernet MAC address (4,096) me ka hana kānana ʻikepili kūloko 4Channel Ethernet rate he 1984Kbps, hoʻonohonoho i ka mua. ， ʻelua ， kaila kaila ʻekolu, ka ʻehā o ka laina Ethernet rate hoʻokaʻawale maʻalahi Hiki i ka mea kūloko ke koi i ka helu kelepona mamao e hahai iā ia Loaʻa ka hana o ka interface E1 hoʻihoʻi hope, pale i ka hāʻule ʻana o ka mea hoʻololi no ka hoʻihoʻi ʻana o ka loop interface; Hiki iā ia ke hoʻonohonoho i ka laina E1 e hoʻouna ʻole i ka hōʻailona LINK i ka interface Ethernet i ka wā e haki ai ka laina E1; Kākoʻo ka Ethernet interface i nā jumbo frames (2036 Bytes) Ethernet interface supports10M/100M, half/full duplex auto-Negotiation and AUTO-MDIX (crossed line and straightly connect line self-adaptable ) Loaʻa iā Ethernet ka nānā pono ʻana i ka hana, ʻaʻole e hana nā mea hana. make Hāʻawi i nā ʻano uaki 2: E1 master clock and E1 line clock; Loaʻa i ʻekolu Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、E kauoha i ka mamao Ethernet interface Loop Back(REM) Hāʻawi i 2 impedances: 75 Ohm unbalance a me 120 Ohm koena; Hoʻomaopopo i ka nānā ʻana i ka wela o nā lako mamao a me ka volta mai nā lako kūloko; Kākoʻo SNMP Network Management; Nā ʻāpana ♦ E1 Interface Interface Standard: e hoʻokō me ka protocol G.703; Ka helu o ka Interface: n*64Kbps±50ppm; Code Interface: HDB3; E1 Impedance: 75Ω (ke kaulikeʻole), 120Ω (kaulike); ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823 i ʻae ʻia Attenuation: 0~6dBm ♦ Ethernet interface(10/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible me IEEE 802.3 , IEEE 802.1Q (VLAN) Hiki i ka helu wahi MAC: 4096 Mea hoʻohui: RJ45, kākoʻo Auto-MDIX ♦ Kaiapuni hana Ka mahana hana: -10 ° C ~ 50 ° C Ka haʻahaʻa hana: 5% ~ 95 % (ʻaʻohe condensation) Ka mahana mālama: -40 ° C ~ 80 ° C Waihona Humidity: 5 %~95 % (ʻaʻohe condensation) Nā mea kiko'ī Helu kumu hoʻohālike:JHA-CE1fF4p Hōʻike Hana Hana 1channel framed E1 - 4FE Physical lsolation Converter Port Wehewehe Hoʻokahi Fiber interface; 4*FE Interface Power lako mana: AC180V ~ 260V;DC –48V;DC +24VPo ka hoʻohana ʻana i ka mana: ≤10W Ana Nui Huahana Nui: ʻAno liʻiliʻi 216X140X31mm), (W.XDKGX31mm), (W.XDKGXH) / ʻāpana 19 ʻīniha 1U ʻano 483X138X44mm (WXDXH),2.0KG/'āpana Noi

Nā hiʻohiʻona ♦ Kākoʻo 2 1000Base-X SFP slot a me 8 10/100Base-T(X) awa Ethernet. ♦ Kākoʻo iā IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Pākuʻi-a-pāʻani, 10/100Base-T(X), piha/half duplex, MDI/MDI-X auto-adaptation. ♦ Hoʻolālā chip hana, 15kV ESD pale, 8kV surge pale. ♦ DC10-58V mana redundancy, hoohuli polarity pale. ♦ Hoʻolālā papa hana 4, -40-85 ° C ka wela hana. ♦ IP40 helu ʻia ka hale alumini alumini, kau ʻia ʻo DIN-Rail. Introduction JHA-IGS20F08 he plug-and-play unmanaged industrial Ethernet switch, hiki ke hāʻawi i ka hoʻoponopono waiwai no kāu Ethernet. ʻO kona hale paʻa i hoʻopaʻa ʻia i ka lepo (IP40 protection grade), over-current, over-voltage and EMC protected, redundant double power input a me ke kūkulu ʻia ʻana i ka hoʻolālā alarm e hiki ke kōkua i nā limahana hoʻolimalima nui e nānā i ka hana ʻoihana, hiki ke hana hilinaʻi i loko o ka paʻakikī a me ka pilikia. Kākoʻo ʻo JHA-IGS20F08 i 2 1000Base-X SFP slot a me 8 10/100Base-T(X) awa Ethernet. Kākoʻo ia i ka CE, FCC, RoHS maʻamau, ka pahu metala ikaika kiʻekiʻe, hoʻokomo mana (DC10-58V). Kākoʻo ka hoʻololi iā IEEE802.3, IEEE802.3u, IEEE802.3x me 10/100Base-T(X), piha/half-duplex, a me MDI/MDI-X auto-adaptation, hiki ke hālāwai me ka -40-85 ℃. nā ʻano ʻano ʻoihana ʻenehana āpau, e hāʻawi ana i ka hopena hilinaʻi a me ka hoʻokele waiwai no kāu ʻoihana Ethernet ʻoihana. Hōʻike Kūlana Kūlana IEEE802.3, IEEE802.3u, IEEE802.3x Flow Control IEEE802.3x kahe kahe, hoʻihoʻi kaomi kahe mana Ka hoʻololi ʻana i ka hana hoʻouna ʻana: 4.16MppsTransmission Mode: Hale kūʻai a ForwardPacket Buffer Nui: 1MBackplane6Gbps ka nui o ka pākaukau: MACA Bandwidth: 5. 8K Manawa Hoʻopaneʻe: 100,000 Hours Warranty 5-makahiki Ana Manaʻo ʻIke Hōʻike No. Huli Ethernet, 2 1000Base-X SFP Slot a me 8 10 / 100Base-T (X), DIN-Rail, DC10-58V, -40-85 ° C Mana Mana Mana Mana: DC24V DIN-Rail Power Supply a i ʻole Power Adapter he koho.

Nā hiʻohiʻona: ♦ 4 kūʻokoʻa kūʻokoʻa piha-duplex ♦ A hiki i 27.95Gbps no kēlā me kēia channel bandwidth ♦ Huina bandwidth o > 100Gbps ♦ MTP/MPO optical connector ♦ QSFP28 MSA compliant ♦ Compliant me IEEE 802.3-2082 IEEE 802.3-2082. ʻO CAUI-4 chip i module uila maʻamau ITU-T G.959.1-2012-02 maʻamau ♦ Nā mea hiki ke diagnostic diagnostic ♦ Hoʻokahi + 3.3V mana lako e hana ana ♦ Ka wela wela 0 ° C a 70 ° C ♦ RoHS Compliant Part Applications: ♦ Local Area Pūnaehana (LAN) ♦ Pūnaehana ʻĀpana Laulā (WAN) ♦ Nā hoʻololi Ethernet a me nā polokalamu alalaula Wehewehe: ʻO ka ʻO JHA-Q28C01 kahi modula transceiver i hoʻolālā ʻia no nā noi kamaʻilio optical 100m. Hoʻopili ka hoʻolālā i ka 100GbASE-SR4 o ka IEEE 802.3-2012 Clause 88 maʻamau IEEE 802.3bm CAUI-4 chip i ka module uila maʻamau ITU-T G.959.1-2012-02 maʻamau. Hoʻololi ka module i 4 inputs channels (ch) o 25.78Gbps a i 27.95Gbps uila ʻikepili i 4 lanes optical signals, a multiplexs iā lākou i hoʻokahi ala no ka 100Gb/s optical transmission. Ma ka huli ʻana, ma ka ʻaoʻao hoʻokipa, hoʻopau ka module optically de-multiplexes i kahi hoʻokomo 100Gb/s i nā hōʻailona ala 4, a hoʻohuli iā lākou i 4 mau ala e hoʻopuka ai i ka ʻikepili uila. Hoʻopili ʻia kahi kaula lipine fiber optical me kahi mea hoʻohui MPO/MTP ma kēlā me kēia hopena i loko o ka pahu kōpana QSFP28. ʻO ka hoʻonohonoho ʻana o ke kaula lipine ʻo ia ka "ki" a aia nā pine alakaʻi i loko o ka pahu o ka module e hōʻoia i ka alignment kūpono. ʻAʻohe wili maʻamau o ke kaula (kī a hiki i ke kī i luna) no ka hōʻoia ʻana i ke kahawai kūpono i ka hoʻopololei ʻana. Loaʻa ka pilina uila me ka mea hoʻohui 38-pin IPASS® z-pluggable. Hoʻohana ka module mai kahi mana + 3.3V hoʻokahi a me nā hōʻailona mana honua LVCMOS/LVTTL e like me Module Present, Reset, Interrupt and Low Power Mode i loaʻa me nā modula. Loaʻa kahi interface serial 2-wire e hoʻouna a loaʻa i nā hōʻailona mana paʻakikī a loaʻa ka ʻike diagnostic diagnostic. Hiki ke kamaʻilio ʻia nā kaha pākahi a hiki ke pani ʻia nā kahawai i hoʻohana ʻole ʻia no ka maʻalahi o ka hoʻolālā. Hoʻolālā ʻia ka JHA-Q28C01 me ke ʻano kumu, ka pilina optical/electrical a me ke kikowaena diagnostic digital e like me ka QSFP28 Multi-Source Agreement (MSA). Ua hoʻolālā ʻia e hālāwai me nā kūlana hana ʻoi loa o waho e pili ana i ka mahana, ka haʻahaʻa a me ka hoʻopili EMI. Hāʻawi ka module i ka hana kiʻekiʻe loa a me ka hoʻohui ʻana i nā hiʻohiʻona, hiki ke loaʻa ma o kahi interface serial ʻelua-wire. • hōʻailona hōʻailona hōʻailona helu kiʻekiʻe loa. Max maʻamau. Wehehana Waihona Unite TS -40 +85 °C Voltage Voltage VCCT, R -0.5 4 V Hoʻohaʻahaʻa Pili RH 0 85 % • Kaiapuni Hana Manaʻo: Parameter Symbol Min. Max maʻamau. Huina hihia wela wela TC 0 +70 °C Voltage Hāʻawi VCCT, R +3.13 3.3 +3.47 V Hāʻawi i kēia manawa ICC 1000 mA Hoʻoheheʻe Mana PD 3.5 W • Nā ʻano uila (TOP = 0 a 70 °C, VCC = 3.13 a 3.47 Volts Parameter ʻO ka hōʻailona Min Typ Max Unit Note Ka helu ʻikepili no kēlā me kēia Kanal - 25.78125 Gbps Hoʻohana Mana - 2.5 3.5 W Hāʻawi i kēia manawa Icc 0.75 1.0 A Mana I/O Voltage-High VIH 2.0 Vcc V Mana I/O Voltage-Low VIL 0 0.7 V Inter-Channel Skew TSK 150 Ps RESETL 150 Ps US RESETL hōʻoia manawa 100 ms Mana I ka manawa 100 ms Transmitter Hoʻokahi i hoʻopau ʻia ʻO ka Voltage Voltage tolerance 0.3 4 V 1 mode maʻamau ʻo Voltage Tolerance 15 mV Transmit Input Diff Voltage VI 120. UI Loaʻa Hoʻokahi Hoʻopau Voltage Voltage Tolerance 0.3 4 V Rx Output Diff Voltage Vo 600 800 mV Rx Output Piʻi a hāʻule Voltage Tr/Tf 35 ps 1 Huina Jitter TJ 0.7 UI Deterministic Jitter DJ 0.42 UI Note: 20% UI Note: 20% LOA = 0 a 70 °C, VCC = 3.0 a i 3.6 Volts) Hōʻailona Hōʻailona Min Typ Max Unit Ref. Ka lōʻihi o ka hawewe opi λ 840 860 nm RMS ka laula o ke kiʻekiʻe Pm 0.5 0.65 nm ka mana Opika maʻamau no kēlā me kēia Kanal Pavg -8 -2.5 0 dBm Mana Hoʻopau i kēlā me kēia Kanal Poff -30 dBm Ka Laki Hoʻopau Optical ER 3.5 dB Pili/128 Noise Pili -128 dB. 1 Nalo Hoʻihoʻi Optical ʻO ka hoʻomanawanui 12 dB Loaʻa Optical Center Wavelong λC 840 860 nm Mea Loaʻa Manaʻo no kēlā me kēia Kanal R -10.5 dBm Mana Hoʻokomo ʻoi loa PMAX +0.5 dBm Receiver Reflectance Rrx -12 dB LOS De-Assert LOSD -14 dBm LOS0sis . dB Note 12dB Reflection • Diagnostic Monitoring Interface Loaʻa ka hana nānā diagnostics kikohoʻe ma nā QSFP28 SR4 a pau. Hāʻawi ka 2-wire serial interface i ka mea hoʻohana e launa pū me ka module. Hōʻike ʻia ke ʻano o ka hoʻomanaʻo i ke kahe. Hoʻonohonoho ʻia ka wahi hoʻomanaʻo i loko o kahi ʻaoʻao haʻahaʻa, hoʻokahi ʻaoʻao, wahi kikoʻī o 128 bytes a me nā ʻaoʻao kikowaena helu luna. Hāʻawi kēia ʻano i ka hiki i ka manawa kūpono i nā helu ma ka ʻaoʻao haʻahaʻa, e like me Interrupt Flags and Monitors. Loaʻa nā mea kākau manawa koʻikoʻi liʻiliʻi, e like me ka ʻike serial ID a me nā hoʻonohonoho paepae, me ka hana ʻAoʻao Select. ʻO A0xh ka leka uila i hoʻohana ʻia a hoʻohana nui ʻia no ka ʻikepili koʻikoʻi o ka manawa e like me ka lawelawe interrupt i mea e hiki ai i ka heluhelu hoʻokahi manawa no nā ʻikepili āpau e pili ana i kahi kūlana keakea. Ma hope o ka hoʻopaʻapaʻa ʻana, IntL, hiki i ka mea hoʻokipa ke heluhelu i ke kahua hae e hoʻoholo ai i ke kahawai pili a me ke ʻano o ka hae. ʻO ka Page02 ka mea hoʻohana EEPROM a ua hoʻoholo ʻia e ka mea hoʻohana. E ʻoluʻolu e ʻike i ka palapala SFF-8436 ka wehewehe kikoʻī o ka hoʻomanaʻo haʻahaʻa a me ka page00.page03. • Ka manawa no ka Mana Mana a me ke kūlana o ka hana Parameter Symbol Max Unit Conditions Initialization Time t_init 2000 ms Ka manawa mai ka mana on1, wela wela a i ʻole ka piʻi ʻana o ka ʻaoʻao o Reset a hiki i ka holo pono ʻana o ka module. ʻoi aku ka lōʻihi ma mua o ka liʻiliʻi o ka manawa pulse hōʻano hou ma ka pine ResetL. Manawa Mākaukau Lako Bus Serial t_serial 2000 ms Ka manawa mai ka mana on1 a hiki i ka pane ʻana o ka module i ka hoʻouna ʻana i ka ʻikepili ma luna o ke kaʻaahi serial 2-wire Nānā Ikepili Manawa t_data 2000 ms Manawa mai ka mana ma1 a hiki i ka ʻikepili ʻaʻole i mākaukau, bit 0 o Byte 2, deasserted a ʻōlelo ʻia ʻo IntL Hoʻihoʻi hou i ka Manawa Manaʻo t_reset 2000 ms Ka manawa mai ka piʻi ʻana ma ka pine ResetL a hiki i ka piha ʻana o ka module functional2 LPMode Assert Time ton_LPMode 100 μs Ka manawa mai ka hoʻohiki ʻana o LPMode (Vin:LPMode =Vih) a hiki i ka komo ʻana o ka mana o ka module i lalo Mana Level IntL Assert Time ton_IntL 200 ms Ka manawa mai ka hiki ʻana mai o ke kūlana e hoʻomaka ana IntL a hiki i Vout:IntL = Vol IntL DeastL Time 500 μs toff_IntL 500 μs Manawa mai ka maopopo ma ka heluhelu 3 ka hana o ka hae pili a hiki i ka Vout:IntL = Voh. Hoʻopili kēia i nā manawa deassert no Rx LOS, Tx Fault a me nā ʻāpana hae ʻē aʻe. Rx LOS Assert Time ton_los 100 ms Manawa mai Rx LOS mokuʻāina i Rx LOS bit set a IntL asserted Flag Assert Time ton_flag 200 ms Manawa mai ka hiki ʻana mai o ke kūlana e hoʻoulu ana i ka hae i ka hoʻonohonoho bit hae pili a ua hoʻokūpaʻa ʻia ʻo IntL Mask Assert Time ton_mask 100 ms Ka manawa mai ka mask. bit set4 a hiki i ka wā e pale ʻia ai ka ʻōlelo IntL pili i ka Mask De-assert Time toff_mask 100 ms Hoʻomaʻemaʻe ʻia ka manawa mai ka bit mask 4 a hiki i ka hoʻomaka ʻana o ka hana IntlL pili i ka ModSelL Assert Time ton_ModSelL 100 μs Manawa mai ka ʻōlelo ʻana o ModSelL a hiki i ka pane ʻana o ka module i ka lawe ʻana i ka ʻikepili ma luna o ke kaʻaahi serial 2-wire ModSelL Deassert Time toff_ModSelL 100 mau minuke o ka manawa mai ModSelL ʻAʻole pane ka module i ka lawe ʻana i ka ʻikepili ma luna o ka 2-wire serial bus Power_over-ride a i ʻole Power-set Assert Time ton_Pdown 100 ms Manawa mai P_Down bit set 4 a hiki i ka hoʻohana ʻana i ka mana module e komo i lalo Power Level Power_over-ride a i ʻole Power-set De-assert Time toff_Pdown 300 ms manawa mai P_Down bit i hoʻomaʻemaʻe ʻia4 a hiki i Ua holo pono ka module3 Nānā: 1. Ua wehewehe ʻia ka mana e like me ka manawa e hiki ai nā volta hoʻolako a noho ma luna a i ʻole ka palena iki. waiwai i kuhikuhi ʻia. 2. Ua wehewehe ʻia ka hana piha e like me ka IntL i ʻōlelo ʻia ma muli o ka ʻikepili ʻaʻole mākaukau bit, bit 0 byte 2 de-asserted. 3. Ana ʻia mai ka hāʻule ʻana o ka uaki ma hope o ka pau ʻana o ka heluhelu heluhelu. 4. Ana ʻia mai ka hāʻule ʻana o ka uaki ma hope o ka pau ʻana o ka hana kākau. • Kiʻi Paʻi Paʻa Transceiver Kiʻi 1: Kiʻi Paʻi • Kiʻi Hoʻokaʻina Pin o ka Hoʻohui Papa Hoʻohui Block Nā Helu Pin a me ka inoa l Pin Wehewehe Pin Logic Symbol Name/Description Ref. 1 GND Ground 1 2 CML-I Tx2n Transmitter Inverted Data Input 3 CML-I Tx2p Transmitter Non-Inverted Data Output 4 GND Ground 1 5 CML-I Tx4n Transmitter Inverted Data Input 6 CML-I Tx4p Transmitter Non-Inverted Data Output 7 Ka Honua 1 8 LVTTL-I ModSelL Module E koho i 9 LVTTL-I ResetL Module Reset 10 VccRx +3.3V Mea Loaʻa Mana Mana 2 11 LVCMOS-I/O SCL 2-Wire Serial Interface Clock 12 LVCMOS-I/O SDA 2-Wire Serial Interface Data 13 GND Ground 1 14 CML- O Rx3p Mea Loaʻa Hoʻohuli Ike ʻIkepili 15 CML-O Rx3n Receiver Non-Inverted Data Output 16 GND Ground 1 17 CML-O Rx1p Receiver Inverted Data Output 18 CML-O Rx1n Receiver Non-Inverted Data Output 19 GND Ground 1 20 GND Ground 1 21 CML-O Rx2n Receiver -O Rx2p Receiver Non-Inverted Data Output 23 GND Ground 1 24 CML-O Rx4n Receiver Inverted Data Output 25 CML-O Rx4p Receiver Non-Inverted Data Output 26 GND Ground 1 27 LVTTL-O ModPrsL LVT Interrupt in 28 LVT Module Present 28 +3.3V Mea Hoʻokuʻu Mana Mana 2 30 Vcc1 +3.3V Mana Mana 2 31 LVTTL-I LPMode Mana Haʻahaʻa Mana Haʻahaʻa 32 GND Ground 1 33 CML-I Tx3p Transmitter Huli ʻIkepili Huli 34 CML-I Tx3n Transmitter Non-Inverted GND ʻIkepili 35 1 36 CML-I Tx1p Mea lawe Hoʻopuka ʻIkepili Huli 37 CML-I Tx1n Transmitter Non-Inverted Data Output 38 GND Ground 1 Notes: ʻO GND ka hōʻailona no ka hoʻokahi a me ka lako (mana) maʻamau no nā modules QSFP28, He mea maʻamau nā mea a pau i loko o ka module QSFP28 a ua kuhikuhi ʻia nā voltage module a pau ʻike ʻia kēia hiki. E hoʻopili pololei i kēia mau mea i ka hōʻailona papa hoʻokipa i ka mokulele honua maʻamau. Hoʻopau ʻia ka hoʻopuka laser ma TDIS >2.0V a i ʻole wehe ʻia, hiki iā TDIS