ʻO ka hoʻohana nui ʻana i ka fiber MUX JHA-C2PM-E16
ʻO ka hoʻohana nui ʻana i ka fiber MUX JHA-C2PM-E16
Nānā nui
ʻO kēia hāmeʻa he modular structure point-to-point optical transmission me ka hōʻike LCD, hoʻohana i nā pahu FPGA a maʻalahi hoʻi e hoʻonui.Hāʻawi ka Papa Nui i ka ʻikepili Ethernet 4 * 100M channel a me 2 AUX port no ka hoʻouna ʻana i nā ʻikepili ʻē aʻe e like me RS232/RS485/RS422, ʻelua kikowaena optical no ka koho 1 + 1 auto protection switch (APS).
ʻO 4 mau ʻāpana o ka tributary me nā modula plug-in ʻokoʻa i loaʻa i ka module 4xE1 channels, 4/8/16 x FXO/FXS module a me 2x Nx64K V.35 module. ʻO ka nui o ka hiki ke piʻi i 4 plug-in modules i hiki ke hui pū ʻia me ma luna o nā modula. ʻO ka maʻalahi, ka hana, ʻo ia ka hopena maikaʻi loa no nā lawelawe leo / data / wikiō ma ka mākeke i loaʻa.
Kiʻi Huahana
ʻAno Papakaukau
Nā hiʻohiʻona
- Hāʻawi i ka nui 16 E1 hikiwawe hoʻoili uila;
- Me ka char 16*2 LCD hōʻike a me ka SNMP agent i loko.
- Hāʻawi i ke kikowaena hoʻokele Console (RS232)
- E hoʻolako i hoʻokahi kaila hotline no ke koho;
- E hoʻolako i ʻelua mau kikowaena SFP fiber, hoʻokahi ma ke ʻano he haku, ʻo kekahi ma ke ʻano he kauā, e hōʻoiaʻiʻo ana i ka hoʻouna ʻana i ka lawelawe ʻole.
- ʻO ka nui o ka port optical he 155Mbps, hiki i ka pae hoʻouna ke hiki i 25KM, 40KM, 60KM, 80KM a i ʻole 100KM;
- Hāʻawi i ʻelua mea hoʻopili fiber 1+1 pale (APS) hana, a me ALS (Automatic Laser Shutdown/Reduction) hana
- Hāʻawi i 4 mau ʻāpana plug-in modules:
♦ 4×puka ʻole E1 module（75Ω）/（120Ω）
♦ 4×Framed E1 module（75Ω）/（120Ω）, hiki ke hoʻonohonoho i nā manawa
♦ 4×FXO/FXS/EM2-4/Mode kelepona
♦ 8×FXO/FXS/2 laina leo leo/Magnet kelepona module
♦ 16×FXO/FXS/2 laina leo/Magnet kelepona module
♦ 2×V.35 (2.048M Paʻa wikiwiki) module
♦ 2×V.35 (N*64K N=1-32) module
♦ 4×RS232/422/485 module
♦ 4*FE i ke alahaka E1 (wire speed 2.048M) module
- Hāʻawi i ka 4FE (wire speed 100M) Ethernet channel, kākoʻo i ka negatiate, ua hoʻonohonoho ʻia ka bandwidth Ethernet ma luna o ka nui o 32K.;
- Kākoʻo ʻo Ethernet port i ka piha / hapalua duplex, 10M / 100M auto-ataptable;
- Kākoʻo ke awa Ethernet i ka hana VLAN a loaʻa iā 4 ke ʻano hoʻokaʻawale no ke koho mea hoʻohana;
- Kākoʻo ʻia ka nui o ka pūʻolo Ethernet i ka 1916 byte a me 4 Ethernet awa hiki ke hoʻonohonoho kaʻawale;
- Loaʻa iā ia ka hana alarm piha a hiki ke nānā i ke kūlana o ka mea mamao;
- Kākoʻo iā E1 loop mai kahi mamao e ʻike a hoʻokele pono i ka hāmeʻa;
- ʻO ka hui pū ʻana o AC220V a me DC-48V no ka redundant
Nā ʻāpana
♦ʻO ka fiber
Fiber ano nui
50/125um, 62.5/125um,
Ka lōʻihi o ka hoʻouna ʻana: 5Km @ 62.5 / 125um hoʻokahi fiber mode, attenuation (3dbm/km)
Ka lōʻihi o ka hawewe: 820nm
Ka mana hoʻouna: -12dBm (Min) ~-9dBm (Max)
Ka ʻike o ka mea loaʻa: -28dBm (Min)
Pili kālā: 16dBm
Hoʻokahi-moʻo fiber
8/125um, 9/125um
Ka lōʻihi o ka hoʻouna ʻana: 40Km
Ka lōʻihi o ka lawe ʻana: 40Km @ 9 / 125um hoʻokahi fiber mode, attenuation (0.35dbm/km)
Ka lōʻihi o ka nalu: 1310nm
Ka mana hoʻouna: -9dBm (Min) ~-8dBm (Max)
Ka ʻike o ka mea loaʻa: -27dBm (Min)
Pili kālā: 18dBm
♦E1 Interface
Kūlana Interface: hoʻokō me ka protocol G.703;
Ka helu o ka Interface: n*64Kbps±50ppm;
Code Interface: HDB3;
E1 Impedance: 75Ω (ke kaulikeʻole), 120Ω (kaulike);
ʻO ka hoʻomanawanui Jitter: E like me ka protocol G.742 a me G.823
ʻAe ʻia ka Attenuation: 0~6dBm
♦Pākuʻi Ethernet(10/100M)
Laki waena: 10/100 Mbps, ka hapalua/piha duplex auto-negotiation
Kūlana Interface: Kūpono me IEEE 802.3, IEEE 802.1Q (VLAN)
Hiki iā MAC Address: 4096
Mea hoʻohui: RJ45, kākoʻo Auto-MDIX
♦FXS Phone Interface
Puke kani: 75V
Alapine kani: 25HZ
ʻElua laina Impedance: 600 Ohm (pii)
Hoʻihoʻi poho: 40 dB
♦FXO Switch Interface
ʻIke ʻia ke kani uila: 35V
ʻO ke alapine ʻike apo: 17HZ-60HZ
ʻElua laina Impedance: 600 Ohm (pii)
Hoʻihoʻi poho: 40 dB
♦Laina EM 2/4
AD: 0dB
DA: -3.5dB
ʻElua/ʻEhā-laina Impedance: 600 Ohm
Hoʻihoʻi poho: 20 dB
♦Kaiapuni hana
Ka wela hana: -10°C ~ 50°C
Ka haʻahaʻa hana: 5% ~ 95 % (ʻaʻohe condensation)
Ka mahana mālama: -40°C ~ 80°C
Waihona haʻahaʻa: 5%~95 % (ʻaʻohe condensation)
Nā kikoʻī
| Hoʻohālike | Helu kumu hoʻohālike: JHA-C2PM-E16 |
| Ka wehewehe hana | LCD PDH， 4FE，Me 4 multifunction slots， me ka hana ALS，Console a me SNMP，1+1 Back up Optic fiber |
| Wehewehe Awa | 1 + 1 puka aniani, 4 mau ʻāpana hana nui, 4 mau kikowaena FE, 1 * RS232 Console interface, 1 * SNMP Ethernet interface, hoʻokahi hoʻonohonoho ʻenehana kelepona kelepona. |
| Ka mana | Ka lako mana: AC180V ~ 260V;DC –48V;DC +24VHoʻohana mana: ≤10W |
| Anana | Nui Huahana: 216X140X31mm(WXDXH) |
| Kaumaha | 3KG/PCS |
Palapala noi
Hāʻawi ka motherboard:
1. Hōʻike LCD;
2.4-kanal uea-wikiwiki 100M kaʻana Ethernet channel;
3.2- kanal RS232 / 422/485 asynchronous nā kaha;
4.1 kanal kelepona lehulehu
5. Hoʻoponopono pūnaewele SNMP
4 slot, kākoʻo i ka hoʻokomo hui ʻia, hāʻawi:
4 × E1 module (75Ω) / (120Ω)
4 × framing E1 module (75Ω) / (120Ω), hiki iā ʻoe ke hoʻonohonoho i kahi manawa manawa kūpono ʻole.
4 × FXO / FXS / EM2-4 / modula magnet
8 × FXO / FXS / 2 uea leo / magnet module
16 × FXO / FXS / 2 uea leo / kōpena magnet
2 × V.35 (2.048M helu paʻa) module
2 × V.35 (N * 64K N = 1-32) module
4 × RS232 / 422/485 / hoʻololi module
4 'Enenet bridge (rate 2.048M) module
E like me ka mea i luna, inā makemake ʻoe e hoʻokō i ka hana kelepona 8E1 + 4FE + 32-way (FXO / FXS), hiki iā ʻoe ke hoʻonohonoho i ʻelua kāleka 4E1, ʻelua kāleka kelepona 16xFXO / S.
