8E1 + LCD Ngosipụta + SNMP JHA-C2P-E8bF4R2 PDH Fiber Multiplexer Overview Ngwaọrụ a nwere njikwa njikwa, na-enye 1 + 1 fiber ndabere nchekwa, na-atụ aka ngwa anya nnyefe, LCD ngosi, na isi nke ụlọ ọrụ anyị mmepe nke nnyefe anya PDH, jiri VLSI pụrụ iche na SNMP NMS. Ngwaọrụ na-enye 1-8 * E1 interface, 1-4 * 10 / 100M Ethernet interface (Wire speed 100M) na 2 mgbasawanye interface. 4Channel Ethernet interface bụ mgba ọkụ interface, nwere ike ịkwado VLAN. Enwere ike iji interface mgbasawanye 2 dị ka ọwa nnyefe nke RS232/RS485/RS422 data asynchronous. Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, njikọ dị elu, obere nha ngwaahịa Foto Atụmatụ na-enye 8 E1 transperent transperent; Na char 16 * 2 LCD ngosi na onye nnọchi anya SNMP n'ime Nye njikwa njikwa njikwa (RS232) Nye interface fiber interface 1 + 1 (APS), yana ALS (Automatic Laser Shutdown/Reduction) na-akwado ngwugwu ngwugwu Ethernet 1916 byte na 4 Ethernet. Enwere ike ịtọ ọdụ ụgbọ mmiri iche iche, yana bandwidth ethernet nwere ike ịtọ ntọala na ọtụtụ 32K na-eji ekwentị ekwentị 2 ọkọlọtọ. (na-abụghị ekwentị ejiri) setịpụrụ dị ka engineering iji-waya hotline (nhọrọ) Nye abụọ eriri interfaces, otu dị ka nna ukwu, nke ọzọ dị ka ohu, insuring adịghị akwụsị akwụsị ọrụ nnyefe Ọnụego nke ngwa anya ọdụ ụgbọ mmiri bụ 155Mbps, nnyefe nso nwere ike iru 25KM, 40KM, 60KM, 80KM ma ọ bụ 120KM; E1 interface koodu bụ HDB3, E1 njirimara ịma jijiji kwekọrọ na ITU-T G.703, G.823 na G.742; Ethernet ọdụ ụgbọ mmiri na-akwado zuru / ọkara duplex, 10 / 100M auto-Nego; ọdụ ụgbọ mmiri Ethernet na-akwado ọrụ VLAN ma nwee ọnọdụ nhazi 4 maka nhọrọ onye ọrụ; Nwere ọrụ mkpu zuru ezu ma nwee ike nyochaa ọkwa ngwaọrụ dịpụrụ adịpụ; Na-akwado abụọ Fiber Loop-back, na anọ E1 loop-back mode, ma jikwaa ngwaọrụ nke ọma; onye ọrụ configurable isi mkpu na obere mkpu, ngosi na LCD na ụda mkpu na ọkà okwu; AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ DC-48V/DC + 24V ike ọkọnọ polarity nchọpụta ọrụ, Polarity-Free Parameters ♦ Fiber Multi-mode Fiber 50/125um, 62.5/125um, Oke nnyefe anya: 5Km @ 62.5 / 125um otu mode eriri, attenuation (3dbm / km) Ogologo Wave: 820nm ike na-ebufe: -12dBm (Min) ~ -9dBm (Max) nnabata nnabata: -28dBm (Min) Njikọ mmefu ego: 16dBm Single-mode Fiber 8/125um, 9/125um: Ogologo nnyefe kacha Ogologo nnyefe 40Km: 40Km @ 9 / 125um otu mode fiber, attenuation (0.35dbm / km) Ogologo Ogologo: 1310nm ike nnyefe: -9dBm (Min) ~ -8dBm (Max) nnabata nnabata: -27dBm (Min) Njikọ mmefu ego: 18dBm ♦ E1 Interface na Interface protocol G.703; Ọnụego ntanetị: 2048Kbps± 50ppm; Koodu ihu: HDB3; E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka); Jitter ndidi: N'ikwekọ na protocol G.742 na G.823 ekwe Attenuation: 0 ~ 6dBm ♦ Ethernet interface (10/100M) Ọnụọgụ interface: 10/100 Mbps, ọkara / zuru duplex auto-negotiation Interface Standard: Dakọtara na IE3 802. , IEEE 802.1Q (VLAN) adreesị MAC Ikike: 4096 Njikọ: RJ45, nkwado Auto-MDIX ♦ Ebe na-arụ ọrụ okpomọkụ na-arụ ọrụ: -10 ° C ~ 50 ° C iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation) Nchekwa okpomọkụ: -40 ° C ~ 80 ° C Nchekwa iru mmiri : 5% ~ 95 % (enweghị condensation) Nọmba Model nkọwa nkọwa: JHA-C2P-E8bF4R2 Nkọwa Ọrụ 8 * E1, LCD PDH, 4FE, na ọrụ ALS, Console na SNMP, 1 + 1 Back up Optic fiber Port Description 1 + 1 ọdụ ụgbọ mmiri, 8 * E1 interfaces (75/120ohms), 4 * FE interfaces, 1 * RS232 Console interface, 1 * SNMP Ethernet interface, otu injinia usoro-waya interface ekwentị Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24Vower oriri: ≤10W Akụkụ Ngwaahịa Size: 19 inch 1U 485X138X45mm(WXDXH) Ibu 3KG Ngwa

Atụmatụ ♦ Nkwado 2 10/100/1000Base-T(X) PoE/PoE+ port na oghere 1 1000Base-X SFP. ♦ Nkwado IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at. ♦ Nkwado IEEE802.3af, kacha 15.4W ike ọkọnọ. ♦ Nkwado IEEE802.3at, kacha 30W ike ọkọnọ. ♦ Mgbawa mgbawa mmepụta ihe, 15kV ESD nchebe, 8kV ịwa ahụ nchebe. ♦ DC48-58V ike redundancy, tụgharịa polarity nchebe. ♦ Ụlọ ọrụ mmepụta ihe 4 imewe, -40-85 ° C na-arụ ọrụ okpomọkụ. ♦ IP40 gosiri aluminum alloy ụlọ, DIN-Rail mounted. Okwu Mmalite JHA-IGS12P bụ nkwụnye na-egwu egwuregwu PoE anaghị ejikwa ya. Mgbanwe a na-enye 2 10/100/1000Base-T (X) Ethernet ọdụ ụgbọ mmiri na 1 1000Base-X SFP oghere, ọdụ ụgbọ mmiri Ethernet na-akwado ọrụ Power-over-Ethernet (PoE). A na-ekewa mgba ọkụ ndị ahụ dị ka akụrụngwa isi iyi ike (PSE), na mgbe ejiri ya n'ụzọ dị otú a, mgba ọkụ na-eme ka nhazi nke ọkụ eletrik na-enye ike, na-enye ihe ruru 30 watts nke ike n'otu ọdụ ụgbọ mmiri ma na-ebelata mbọ a chọrọ maka ịwụnye ike. Enwere ike iji mgba ọkụ ahụ mee ka IEEE802.3af / na ngwaọrụ ọkọlọtọ (PD), na-ewepụ mkpa maka wiwi ọzọ. JHA-IGS12P na-akwado CE, FCC, ọkọlọtọ RoHS, nabata ụkpụrụ ụlọ ọrụ, nchekwa IP40, ihe igwe siri ike dị elu, ntinye ike (DC48-58V). Mgbanwe ahụ na-akwado IEEE802.3, IEEE802.3u, IEEE802.3x na 10/100/1000Base-T (X), zuru / ọkara duplex, na MDI / MDI-X auto-adaptation, -40-85 ℃ okpomọkụ na-arụ ọrụ. , nwere ike izute ụdị ụlọ ọrụ mmepụta ihe niile chọrọ, na-enye ngwọta a pụrụ ịdabere na ya na nke akụ na ụba maka netwọk Ethernet ụlọ ọrụ gị. Nkọwapụta Protocol Standard IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/ na Flow Control IEEE802.3x nchịkwa eruba, njikwa mgbagharị azụ na-agbanwe agbanwe Ọnụego mbugharị arụmọrụ: 7.44MppsNtufe Ntugharị: 7.44Mpps Ọnọdụ mbufe Bude: Store na Forward 10Gbps MAC okpokoro Size: Oge igbu oge 8K: 100,000 Hours akwụkwọ ikike 5-afọ Dimension Order Ozi Model No. Nkọwa nke ngwongwo JHA-IGS12P Unmanaged Industrial Poe Switch, 2 10/100/1000Base-T(X) PoE na oghere 1 1000Base-X SFP, DIN-Rail, DC48-58V, -40-85 ° C arụ ọrụ okpomọkụ JHA-IG12P Unmanged Industrial PoE Switch, 2 10/100/1000Base-T (X) PoE/PoE + na 1 1000Base-FX, SC Njikọ, Multimode, Dual Fiber, 550m, DIN-Rail, DC48-58V, -40-85 Celsius C na-arụ ọrụ okpomọkụ JHA-IG12P-20 Unmanged Industrial PoE Switch, 2 10/100/1000Base-T (X) PoE/PoE + na 1 1000Base-FX, SC Njikọ, Single Mode, Dual Fiber, 20Km, DIN -Rail, DC48-58V, -40-85°C Okpomọkụ na-arụ ọrụ JHA-IG12WP-20 anaghị ejikwa Industrial Poe Switch, 2 10/100/1000Base-T (X) PoE/PoE+ na 1 1000Base-FX, SC Connector, Single Mode, Single Fiber, 20Km, DIN-Rail, DC48-58V, - Ihe njikọ eriri ọkụ na-arụ ọrụ 40-85°C: SC / ST / FC / LC (SFP oghere), Single Mode / Multimode, Dual Fiber / Single Fiber, 2Km / 20Km / 40Km / 60Km / 80Km / 100Km / 120Km bụ Nhọrọ. Ike ọkọnọ: DC48V DIN-Rail Power Supply nkwụnye bụ Nhọrọ.

Fiber-8Voice +FE Multiplexer JHA-P08FE01 Overview Ngwaọrụ a na-enye 1-8Channel ekwentị, 1 Channel 10M/100M Ethernet interface (Wire Speed ​​100M) ，1Channel Ethernet interface bụ mgbanwe interface, nwere ike ịkwado VLAN. Akụkụ Obere Foto dabere na nwebiisinka nke IC; njedebe mpaghara nwere ike igosipụta ọkwa njikọ eriri nke ngwaọrụ dịpụrụ adịpụ; ọdụ ụgbọ mmiri na-akwado FXO na ọdụ ụgbọ mmiri FXS, Nkwado FXO/FXS, Interface ekwentị Magnet, ọdụ ụgbọ mmiri FXO nwere ihe ngbanwe na-achịkwa mmemme. , FXS ọdụ ụgbọ mmiri ejikọrọ na ekwentị onye ọrụ; 1 ~ 4channel ịnweta olu, olu FXO / FXS interface, nkwado maka onye na-akpọ ID / ịgba ụgwọ ụgwọ polarity / ọrụ fax; ； Kwado ọrụ ntinye ọnụ ọgụgụ saịtị dị iche iche; Ethernet interface nwere ike ịkwado AUTO-MDIX (ahịrị gafere na ahịrị ejikọtara ozugbo na onwe ya nwere ike ime mgbanwe. ： Mpụga AC220 / 5-12V ike nkwụnye, nwekwara ike ịbụ mpụga DC-48V / 5-12V ike Ihe nkwụnye ekwentị; interface ekwentị nwere nchebe ọkụ, ọkụ ruru IEC61000-4-5 Short sekit dị ugbu a 8 / 20μs, elu mmepụta voltaji 6KV ụkpụrụ mepere emepe. Parameters ♦ Fiber Multi-mode Fiber 50/125um, 62.5/125um, Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um otu eriri mode, attenuation (3dbm / km) Ogologo ikuku: 820nm ike nnyefe: -12dBm (m) Max) onye nnata uche: -28dBm (Min) Njikọ mmefu ego: 16dBm Single-mode Fiber 8/125um, 9/125um Ogologo nnyefe kacha elu: 40Km Nfefe anya: 40Km @ 9 / 125um otu ụdị eriri, attenuation (0.35dbm / km) Ogologo Wave 131n Ike mbufe: -9dBm (Min) ~-8dBm (Max) Nnata uche: -27dBm (Min) Njikọ mmefu ego: 18dBm ♦ E1 Interface Interface Standard: soro protocol G.703; Ọnụego ihu: n*64Kbps±50ppm; Koodu ihu: HDB3; E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka); Jitter ndidi: N'ikwekọ na protocol G.742 na G.823 ekwe Attenuation: 0 ~ 6dBm ♦ Ethernet interface (10 / 100M) Ọnụ ọgụgụ interface: 10/100 Mbps, ọkara / zuru duplex auto-negotiation Interface Standard: Dakọtara na IE3 802. , IEEE 802.1Q (VLAN) adreesị MAC Ikike: 4096 Njikọ: RJ45, na-akwado Auto-MDIX ♦ FXS ekwentị Interface mgbanaka mgbanaka voltaji: 75V ugboro mgbanaka: 25HZ Abụọ-akara Impedance: 600 Ohm (bulie) nloghachi ọnwụ: 40 dB ♦ FXO Gbanwee Interface mgbanaka nchọpụta voltaji: 35V Ring ugboro: 17HZ-60HZ Mmegide eriri abụọ: 600 Ohm (bulie) nkwụghachi azụ: 40 dB Nlaghachi azụ: 20 dB ♦ Ebe na-arụ ọrụ okpomọkụ: -10 ° C ~ 50 ° C iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation) Nchekwa okpomọkụ: -40 ° C ~ Iru mmiri 80°C: 5%~95 % (enweghị condensation) Ụdị nkọwapụta JHA-P08FE01 Nkọwa Ọrụ 8* ekwentị ， 1 * 100 Mbps Ethernet ， 1 * Fiber interface Ike ọkọnọ: DC5-12V ike oriri: ≤10W Akụkụ Ngwaahịa Size: 90X104X31mm(WXDXH) Obere ụdị ibu 0.8KG Ngwa

Fiber-8Voice +FE Multiplexer JHA-P08FE01 Overview Ngwaọrụ a na-enye 1-8Channel ekwentị, 1 Channel 10M/100M Ethernet interface (Wire Speed ​​100M) ，1Channel Ethernet interface bụ mgbanwe interface, nwere ike ịkwado VLAN. Akụkụ Obere Foto dabere na nwebiisinka nke IC; njedebe mpaghara nwere ike igosipụta ọkwa njikọ eriri nke ngwaọrụ dịpụrụ adịpụ; ọdụ ụgbọ mmiri na-akwado FXO na ọdụ ụgbọ mmiri FXS, Nkwado FXO/FXS, Interface ekwentị Magnet, ọdụ ụgbọ mmiri FXO nwere ihe ngbanwe na-achịkwa mmemme. , FXS ọdụ ụgbọ mmiri ejikọrọ na ekwentị onye ọrụ; 1 ~ 4channel ịnweta olu, olu FXO / FXS interface, nkwado maka onye na-akpọ ID / ịgba ụgwọ ụgwọ polarity / ọrụ fax; ； Kwado ọrụ ntinye ọnụ ọgụgụ saịtị dị iche iche; Ethernet interface nwere ike ịkwado AUTO-MDIX (ahịrị gafere na ahịrị ejikọtara ozugbo na onwe ya nwere ike ime mgbanwe. ： Mpụga AC220 / 5-12V ike nkwụnye, nwekwara ike ịbụ mpụga DC-48V / 5-12V ike Ihe nkwụnye ekwentị; interface ekwentị nwere nchebe ọkụ, ọkụ ruru IEC61000-4-5 Short sekit dị ugbu a 8 / 20μs, elu mmepụta voltaji 6KV ụkpụrụ mepere emepe. Parameters ♦ Fiber Multi-mode Fiber 50/125um, 62.5/125um, Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um otu eriri mode, attenuation (3dbm / km) Ogologo ikuku: 820nm ike nnyefe: -12dBm (m) Max) onye nnata uche: -28dBm (Min) Njikọ mmefu ego: 16dBm Single-mode Fiber 8/125um, 9/125um Ogologo nnyefe kacha elu: 40Km Nfefe anya: 40Km @ 9 / 125um otu ụdị eriri, attenuation (0.35dbm / km) Ogologo Wave 131n Ike mbufe: -9dBm (Min) ~-8dBm (Max) Nnata uche: -27dBm (Min) Njikọ mmefu ego: 18dBm ♦ E1 Interface Interface Standard: soro protocol G.703; Ọnụego ihu: n*64Kbps±50ppm; Koodu ihu: HDB3; E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka); Jitter ndidi: N'ikwekọ na protocol G.742 na G.823 ekwe Attenuation: 0 ~ 6dBm ♦ Ethernet interface (10 / 100M) Ọnụ ọgụgụ interface: 10/100 Mbps, ọkara / zuru duplex auto-negotiation Interface Standard: Dakọtara na IE3 802. , IEEE 802.1Q (VLAN) adreesị MAC Ikike: 4096 Njikọ: RJ45, na-akwado Auto-MDIX ♦ FXS ekwentị Interface mgbanaka mgbanaka voltaji: 75V ugboro mgbanaka: 25HZ Abụọ-akara Impedance: 600 Ohm (bulie) nloghachi ọnwụ: 40 dB ♦ FXO Gbanwee Interface mgbanaka nchọpụta voltaji: 35V Ring ugboro: 17HZ-60HZ Mmegide eriri abụọ: 600 Ohm (bulie) nkwụghachi azụ: 40 dB Nlaghachi azụ: 20 dB ♦ Ebe na-arụ ọrụ okpomọkụ: -10 ° C ~ 50 ° C iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation) Nchekwa okpomọkụ: -40 ° C ~ Iru mmiri 80°C: 5%~95 % (enweghị condensation) Ụdị nkọwapụta JHA-P08FE01 Nkọwa Ọrụ 8* ekwentị ， 1 * 100 Mbps Ethernet ， 1 * Fiber interface Ike ọkọnọ: DC5-12V ike oriri: ≤10W Akụkụ Ngwaahịa Size: 90X104X31mm(WXDXH) Obere ụdị ibu 0.8KG Ngwa