Atụmatụ ♦ Nkwado 1 1000Base-X SFP oghere na 1 10/100/1000Base-T (X) ọdụ ụgbọ mmiri Ethernet. ♦ Nkwado IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Nkwụnye-na-egwu, 10/100/1000Base-T (X), zuru / ọkara duplex, MDI / MDI-X akpaaka-adaptation. ♦ Mgbawa mgbawa mmepụta ihe, 15kV ESD nchebe, 8kV ịwa ahụ nchebe. ♦ DC10-58V redundancy ike, tụgharịa polarity nchebe. ♦ Ụlọ ọrụ mmepụta ihe 4 imewe, -40-85 ° C na-arụ ọrụ okpomọkụ. ♦ IP40 gosiri aluminum alloy ụlọ, DIN-Rail mounted. Okwu Mmalite JHA-IGS11 sis nkwụnye na-egwu ụlọ ọrụ anaghị ejikwa Ethernet mgba ọkụ, nke nwere ike ịnye ngwọta akụ na ụba maka Ethernet gị. Ihe mkpuchi uzuzu ya zuru oke (ọkwa nchekwa IP40), nke na-adị ugbu a, oke voltaji na EMC echekwabara, ntinye ike ugboro abụọ yana imepụta mkpu nwere ọgụgụ isi nwere ike inyere ndị ọrụ ụlọ ọrụ sistemu aka nyochaa ọrụ netwọkụ, nke nwere ike. na-arụ ọrụ ntụkwasị obi na gburugburu ebe siri ike ma dị ize ndụ. JHA-IGS11 na-akwado 1 1000Base-X SFP oghere na 1 10/100/1000Base-T (X) ọdụ ụgbọ mmiri Ethernet. Ọ na-akwado CE, FCC, ọkọlọtọ RoHS, igwe siri ike siri ike, ntinye ike (DC10-58V). Mgbanwe ahụ na-akwado IEEE802.3, IEEE802.3u, IEEE802.3x na 10/100/1000Base-T (X), zuru / ọkara duplex, na MDI / MDI-X auto-adaptation, -40-85 ℃ okpomọkụ na-arụ ọrụ. nwere ike izute ụdị ụlọ ọrụ mmepụta ihe niile chọrọ, na-enye ngwọta a pụrụ ịdabere na ya na nke akụ na ụba maka netwọk Ethernet ụlọ ọrụ gị. Nkọwapụta Protocol Standard IEEE802.3, IEEE802.3u, IEEE802.3x Flow Control IEEE802.3x na-achịkwa usoro nchịkwa, nchịkwa nchịkwa azụ na-ebugharị na-ebugharị ọnụego: 7.44Mpps Ọnọdụ nnyefe: Ụlọ ahịa na ForwardPacket Buffer Size: 1MBackplaneK: 1MBack Oge igbu oge: 0 Hour,00 Akwụkwọ ikike nke afọ 5 Ụdị ozi usoro nha Ọ dịghị. Nkọwa nke ngwongwo JHA-IGS11 Unmanged Industrial Ethernet Switch, 1 1000Base-X SFP oghere na 1 10/100/1000Base-T (X), DIN-Rail, DC10-58V, -40-85 °C Ịrụ ọrụ okpomọkụ JHA- IG11 anaghị ejikwa Industrial Ethernet Switch, 1 1000Base-FX na 1 10/100/1000Base-T (X), Njikọ SC, Multimode, Dual Fiber, 550m, DIN-Rail, DC10-58V, -40-85°C Ịrụ ọrụ okpomọkụ JHA-IG11-20 Unmanaged Industrial Ethernet Switch, 1 1000Base- FX na 1 10/100/1000Base-T(X), SC Njikọ, Single Mode, Dual Fiber, 20Km, DIN-Rail, DC10-58V, -40-85°C arụ ọrụ okpomọkụ JHA-IG11W-20 Unmanaged Industrial Ethernet Switch, 1 1000Base-FX na 1 10/100/1000Base-T X), Njikọ SC, Otu ọnọdụ, otu eriri, 20Km, DIN-Rail, DC10-58V, -40-85°C arụ ọrụ okpomọkụ Fiber Connector: SC/ST/FC/LC(SFP Slot), Single Mode/Multimode, Dual Fiber/Single Fiber, 550m/2Km/20Km/40Km/ 60Km/80Km/100Km/120Km bụ Nhọrọ. Ike: DC24V DIN-Rail ike ọkọnọ ma ọ bụ ihe nkwụnye ọkụ bụ nhọrọ.

Framed E1-V.35 interface Ntụgharị JHA-CE1fV1 Overview Nke a interface Ntụgharị na-enye otu E1 interface na otu V.35 interface nweta framed E1 interface na-ebufe ka V.35 interface. Ọnụego ọwa data bụ 2.048Mbps. Ngwaọrụ ahụ nwere ọrụ nnwale nke etinyere n'etiti iji kwado mmalite ọrụ na mmezi kwa ụbọchị. Ngwaahịa Foto Obere atụmatụ atụmatụ dabere na onwe nwebiisinka IC nwere egosi mgbe ngwaọrụ agbanyụrụ ma ọ bụ E1 akara agbajiri ma ọ bụ hapụ mgbaama; Ngwaọrụ mpaghara nwere ike ịmanye ọnụ ọgụgụ ngwaọrụ dịpụrụ adịpụ na-eso ya (dị mma mgbe etinyere ya) Ngwaike na-achọpụta ihe ọ bụla n'ime oghere 31 oge ọ bụla nhọrọ nhọrọ oge (nke dị mma mgbe etinyere ya) Nye 2 impedances: 75 Ohm unbalance na 120 Ohm itule; Mgbe nlezianya ule na bara uru nkwenye usoro, kpamkpam soro protocol ITU-T V.35, G.703, G.704 Nwere atọ akaghị azụ Mode: E1 interface Loop Back (ANA) 、V.35 interface Loop Back(DIG) 、 Nye iwu ka ihe dịpụrụ adịpụ V.35 interface Loop Back(REM) nwee ọrụ nyocha koodu nzuzo pseudo, ahịrị mepere ngwa ngwa, enwere ike iji ya dị ka onye nyocha 2M BER. V.35 interface na-akwado nkwụnye ọkụ na-ekpo ọkụ, na-akwado njikọ njikọ ngwaọrụ DTE ma ọ bụ DCE Nye ụdị elekere 3: elekere ime, elekere mpụga, elekere akara E1; AC 220V, DC-48V, DC+24V, DC Power na Polarity-Free Parameters ♦ E1 Interface Interface Standard: soro protocol G.703; Ọnụego ihu: n*64Kbps±50ppm; Koodu ntanetịime: HDB3; E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka); Jitter ndidi: N'ikwekọ na protocol G.742 na G.823 ekwe Attenuation: 0~6dBm ♦ V.35 interface Interface ọnụego: n*64Kbps Interface Standard: Dakọtara na V.35 Standard Connector: DB25 Jikọọ Mode: DCE elekere Ụdị: G.703 eweghachite elekere, Elekere ime ♦ Ebe arụ ọrụ Okpomọkụ na-arụ ọrụ: -10°C ~ 50°C iru mmiri na-arụ ọrụ: 5%~95 % (enweghị condensation) Ọnọdụ nchekwa: -40°C ~ 80°C Nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation) Nkọwapụta nọmba Model Model:JHA- CE1fV1 Nkọwa Ọrụ E1-V.35 Ntụgharị, nwere ike ịbụ otu ojiji, V.35 ọnụego N * 64K Port Description Otu E1 ọdụ ụgbọ mmiri, Otu V.35 interface Ike ọkọnọ: AC180V ~ 260V；DC -48V；DC +24Vower oriri: ≤10W Dimension Product Size: 216X140X31mm (WXDXH) Ibu 1.8KG / mpempe akwụkwọ

Atụmatụ: ◊ Ruo 155Mb/s Data Links ◊ Hot-Pluggable ◊ Duplex LC njikọ ◊ Ruo 80km na 9/125μm SMF ◊ 1550nm DFB Laser transmitter ◊ Single +3.3V Power Supply 7 Interface Suply Supply 7. ◊ Ike kacha 2.0V ma ọ bụ meghere, agbanyere na TDIS 1000 V) Mwepu Electrostatic (ESD) na Duplex LC Receptacle IEC 61000-4-2GR-1089-CORE Dakọtara na ọkọlọtọ InCC Nkeji 15 Klas BEN55022 Klas B (CISPR 22B)VCCI Klas B dakọtara na ọkọlọtọ Laser Eye Safety FDA 21CFR 1040.10 na 1040.11EN60950, EN (IEC) 60825-1,2 dakọtara na klas 1 laser ngwaahịa. • sekit akwadoro SFP onye ọbịa sekit • Akụkụ arụrụ arụ ọrụ eserese

Atụmatụ ◊ Nkwado 100GBASE-SR4/EDR ngwa ◊ Dabara na QSFP28 Eletriki MSA SFF-8636 ◊ Ọnụọgụ ọtụtụ ruo 25.78125Gbps C na + 70 °C ◊ RoHS kwadoro ◊ UL certification cables (nhọrọ) Ngwa ◊ 100GBASE-SR4 na 25.78125Gbps kwa uzo Oke kacha. Nkeji ndetu ọkọnọ voltaji Vcc3 -0.5 - +3.6 V Okpomọkụ Ts -10 - +70 Celsius C arụ ọrụ iru mmiri RH +5 - +85 % 1 Mara: 1 Ọ dịghị condensation akwadoro ọnọdụ ọrụ Tebụl 2- akwadoro ọrụ ọnọdụ Parameter Symbol Min. Oke kacha. Ihe ndetu nkeji na-arụ ọrụ ọnọdụ ọnọdụ okpomọkụ TC 0 - +70 Celsius C na-eweta ọkụ voltaji Vcc 3.14 3.3 3.47 V Mgbasa ọkụ Pd - - 2.5 W 1 Bit Rate BR 10.3125 25.78125 - Gbps Cheta na: 1 Perac-Pariteristic Eletriki Charteristic Charteristic Min. Ụdị. Oke. Nkeji ndetu ModSelL Module Họrọ VOL 0 - 0.8 V Modul anaghị ahọpụta VOH 2.5 - VCC V LPMode Ọnọdụ ike dị ala VIL 0 - 0.8 V Nkịtị Ọrụ VIH 2.5 - VCC +0.3 V Tọgharia VIL 0 - 0.8 VCC Nrụgharị VIL 0 - 0.8 VCC V ModPrsL Ịrụ ọrụ nkịtị VOL 0 - 0.4 V IntL nkwụsị VOL 0 - 0.4 V Normal Operation VoH 2.4 - VCC V Eletriki na-ebufe àgwà dị iche iche ụbọchị ntinye Swing Vin ，pp 200 - 1600 mV mmepụta ihe dị iche iche data ọkụ eletrik Zin 90 10Ω Character Characterial Characterial Mmepụta Swing Vout 200 - 800 mV Bit Error Rate BER - - E-12 - 1 Input Differential Impedance ZD 90 100 110 Ω Mara: 1 PRBS2 ^ 31-1@25.78125Gbps akwadoro Interface Circuit Figure 1, Recommen Interface Figure 2, Recommend Interface Seirt Figure 1, Recommen Ọrụ Nleta Ntụtụ 4-Pin Nkọwa Pin Symbol Aha/Nkọwa ndetu 1 GND Ground 1 2 Tx2n Transmitter Transmitter Inverted Data Ntinye 3 Tx2p Transmitter Na-abụghị Ntinye Data 4 GND Ground 1 5 Tx4n Transmitter Inverted Data Ntinye 6 Tx4p Transmitter Na-abụghị Gụnye Gụnye 7 GND GND. Họrọ 9 ResetL Module Tọgharia 10 Vcc Rx +3.3V Onye Na-anata Ike 11 SCL 2-waya serial interface elekere 12 SDA 2-waya serial interface data 13 GND Ground 1 14 Rx3p Nnata nke na-abụghị atụgharị data data 15 Rvert G3n 15 Rx3n Ala 1 17 Rx1p Onye nnata data anaghị atụgharị 18 Rx1n Onye na-anata data 19 GND Ground 1 20 GND Ground 1 21 Rx2n Onye na-anata ihe ngbanwe data 22 Rx2p Nnata nke na-abụghị nke etinyere Rx1n GND4 GND4. Ntụnye ntinye data atụgharịgharịrị aha Pin akara aha/Nkọwa nkọwa 25 Rx4p Onye nata ihe na-abụghị nke 26 GND Ground 1 27 ModPrsL Module Present 28 IntL Nkwụsị 29 Vcc Tx +3.3V Onye na-ebunye ike ọkụ 30 Vcc1 +331 ModPr. GND Gburugburu 1 33 Tx3p Transmitter Na-abụghị Inverted Data Ntinye 34 Tx3n Transmitter Inverted Data Input 35 GND Ground 1 36 Tx1p Transmitter Na-abụghị Inverted Data Input 37 Tx1n Transmitter Inverted Data Input 38 GND Ground. Nlebanya nkọwapụta foto 3, Ebe nchekwa Map Mechanical Design Eserese Unit mm Tebụl 5- Ogologo eriri USB Ogologo L (Unit: m) ndidi (Unit: cm) ≤1.0 +5/-0 1.0＜L≤4.5 +15/-0 4.5＜L≤4.5 +15/-0 4.5： L≤14.5 +30/-0 14.5 +2%/-0 Ịdọ aka ná ntị Ijikwa kpachara anya: Ngwaọrụ a nwere ike imebi n'ihi mwepu electrostatic (ESD). A na-atụ aro gburugburu ebe kwụ ọtọ n'efu. Soro ntuziaka dabere na usoro ESD kwesịrị ekwesị. Nchekwa Laser: Radiation nke ngwaọrụ laser na-ewepụta nwere ike ịdị ize ndụ nye anya mmadụ. Zere ikpughe anya na radieshon ozugbo ma ọ bụ na-apụtaghị ìhè.

Ọwa E1-31 RS232/RS422/RS485 Ntụgharị JHA-CE1D31/R31/Q31 Ntụgharị ihe ntụgharị ihu igwe dabere na FPGA, na-enye nnyefe 31Channel RS232/485/422 na interface E1. Ngwaahịa a na-agbaji site na esemokwu dị n'etiti anya nzikọrịta ozi serial interface ọdịnala na ọnụego nzikọrịta ozi, ewezuga, ọ nwekwara ike dozie nnyonye anya elektrọn, nnyonye anya mgbanaka ala na mmebi ọkụ. Ngwaọrụ na-eme ka ntụkwasị obi dịkwuo mma, nchekwa na nzuzo nke nzikọrịta data. A na-eji ya maka njikwa ụlọ ọrụ dị iche iche, njikwa usoro na oge njikwa okporo ụzọ, ọkachasị maka Bank, na ike na mpaghara ndị ọzọ na sistemụ nwere ihe pụrụ iche chọrọ maka gburugburu nnyonye anya electromagnetic. Ọwa RS232/RS485/RS422 nwere ike ibunye data serial asynchronously 0Kbps-14400bps baud ọnụego. Ngwaahịa Foto 19inch 1U ụdị atụmatụ dabere na nwebisiinka nke onwe IC Nkwado 3 ahịrị RS232 (TXD, RXD, GND), nkwado maka njikwa CD, DSR, CTS nwere ọnọdụ azụ azụ atọ: E1 interface Loop Back (ANA), RS232/485 / 422 interface Loop Back(DIG) , Nye iwu RS232/485/422 dịpụrụ adịpụ interface Loop Back(REM) RS232/RS485/RS422 na-akwado nkwụnye ọkụ, na-akwado njikọ njikọ DTE ma ọ bụ DCE ngwaọrụ RS232/RS485/RS422 nwere ike ịnyefe data serial adaptable asynchronously 0Kbps-14400bps baud rate Nwere pseudo random code ọrụ, mfe akara ọrụ enwere ike iji ya dị ka 2M BER Tester Serial ọdụ ụgbọ mmiri Amụma-nchedo ruru IEC61000-4-5 (8/20μS) DM (differential Mode): 6KV, Impedance (2 Ohm), CM (Common Mode): 6KV, impedance (2 Ohm) ọkọlọtọ Nye 2 impedances: 75 Ohm enweghị atụ na 120 Ohm itule; Ọ nwere ike ịmepụta E1 serial converter (A) --- E1 fiber optic modem (B) --- fiber serial modem (C) topology AC 220V, DC-48V, DC + 24V, DC Power na Polarity-Free Parameters ♦ E1 interface Interface Standard: soro protocol G.703; Ọnụego ntanetị: 2048Kbps± 50ppm; Koodu ntanetịime: HDB3; Mgbochi: 75Ω (unbalance), 120Ω (balance); Jitter ndidi: N'ikwekọ na protocol G.742 na G.823 ekwe Attenuation: 0 ~ 6dBm ♦ Serial interface Standard EIA/TIA-232 RS-232 (ITU-T V.28) EIA/TIA-422 RS-422 (ITU -T V.11) EIA/TIA-485 RS-485 (ISO/IEC8284) Oghere Usoro Interface RS-422: TXD+, TXD-, RXD+, RXD-, Signal Ground RS-485 4 wires: TXD+, TXD-, RXD+, RXD-, Signal Ground RS-485 2 wires: Data+(Corre) TX+), Data- (TX kwekọrọ-), Ala mgbaama RS-232: RXD, TXD, Ala mgbaama ♦ Ebe na-arụ ọrụ okpomọkụ: -10°C ~ 50°C iru mmiri na-arụ ọrụ: 5% ~ 95 % (enweghị condensation) Nchekwa okpomọkụ: -40°C ~ 80°C Nchekwa. Iru mmiri: 5% ~ 95 % (enweghị condensation) Nọmba Model nkọwa nkọwa: JHA-CE1D31/R31/Q31 nkọwa ọrụ E1-31 Channel RS232/RS422/RS485 Ntụgharị Port nkọwa Otu E1 Interface, 31 Data Interface Ike ọkọnọ: AC180V ~ 260V;DC -48V；DC +24Vower oriri Size:Wm : 485X138X44mm (WXDXH) Arọ 2.0KG/ibe Ngwa Ngwa ngwa ngwa 1 Ihe ngwọta a na-ahụkarị 2

Okwu mmalite JHA-P41208BM usoro switches na-enye site na otu netwọk ọnụ na-eji Cat5 cable n'out oge nnyefe nke data na ike, mgbe AC ​​ike na-adịghị ike ma ọ bụ na-ike inconvenient (dị ka PTZ ese foto na WiMAX ngwaọrụ), JHA-P41208BM usoro e mere maka ikuku netwọk. , nchekwa akpaaka ngwa. JHA-P41208BM usoro switches n'ụzọ dị ịrịba ama na-ebelata ọnụ ahịa wiring onye ọrụ ike, ikuku LAN ohere ohere, video onyunyo ese foto na ndị ọzọ ngwá ga-eji na mma na-akwado ọhụrụ ọrụ na ngwa, na-enye ndị ọrụ na a elu mgbanwe na ngagharị. Algorithm dị elu nke na-achọpụta onwe ya naanị maka ọkọlọtọ PD ọnụ akụrụngwa ike ọkọnọ, yabụ na ọ dịghị mkpa ka ị na-echegbu onwe gị maka mmebi nke akụrụngwa PoE PoE nkeonwe ma ọ bụ na-abụghị ọkọlọtọ. Mfe na ntụkwasị obi imewe, JHA-P41208BM usoro nke akpaka njirimara PoE chọrọ, ọsọ, duplex, na-eji Auto Up njikọ TM ụdị USB. Atụmatụ • 8*100/1000mbps POE ọdụ ụgbọ mmiri;2*100/1000mbps elu njikọ ọdụ ụgbọ mmiri;1*100/1000mbps SFP Port • 100m Anya na Vlan ọrụ • Nkwado IEEE802.3AF/AT • Ike dum:120W(52V 2). • Ọdụ ụgbọ mmiri niile na-akwado MDI / MDIX auto tụgharịa na mkparita uka nke onwe • Nyefee 11 * 10/100/1000Mpbs na-emegharị elu ọsọ na-ebugharị data ngwugwu na-adịghị efu ọdụ ụgbọ mmiri. • Na-akwado njikwa IEEE802.3x maka ọnọdụ duplex zuru oke na nkwụghachi azụ maka ọnọdụ Half-duplex. Ọdụ ụgbọ mmiri ọ bụla max. ike ọkọnọ ruru 30W. Ngwa: • Ikuku Access Point • Igwefoto IP • Ekwentị IP • Kọmputa Netwọk nkọwa Ngwaahịa 8+2+1 Port full giga POE Switch (wuru na) Model JHA-P41208BM POE Port 1 ka 8 na-akwado IEEE802.3AF/AT Standard mmepụta Ike 15.4W/30W IEEE802.3af/na Ike Pin Abụọ 1/2+, 3/6- na 4/5+7/8- Ike dum ≤120W (52V 2.3A) POE Protocol IEEE 802.3af/IEEE 802.3at POE Type End-span Power Distance ≤200m Network Standard IEEE 802.3, IEEE802.3u,802.3x,802.3af/na Network Medium 100/1000BASE-TX: Klas 5 na n'elu na-abụghị echebe gbagọrọ agbagọ ụzọ Data anya ≤100m Gbanwee ike 22Gbps ebugharị Mode Store na mbugharị ọnụego. 100Mbps:14880pps1000Mbps:14800pps MAC Adreesị MAC adreesị table 2K Port Function Ike mkpa usoro, ngwa ngwa na-aga n'ihu, MAC akpaka mmụta na ịka nká IEEE802.3X Full-duplex na mode na backpressure maka Half-duplex mode LED Indicator ọ bụla ọdụ ụgbọ mmiri nwere 1 LINK/Akara ngosi. .100Mbps, POE Ọnọdụ egosi, dum ike egosi na-arụ ọrụ gburugburu ebe obibi na-arụ ọrụ okpomọkụ:-10°-- 55°C Ntinye AC110-240V 50/60HZ arọ 1.8kg Size 270mm*180mm*44mm(L*W*H) Order Ozi Model No. Nkọwa nke ngwongwo JHA-P41208 * 10/100/1000M Poe Port+2*10/100/1000M RJ45 Port+1*10/100/1000M Fiber Port, SFP oghere, na-enye ọkụ, na VLAN.

Atụmatụ ◊ Nkwado 4x25GBASE-SR ngwa ◊ Dabara na QSFP28 MSA SFF-8636 na SFP28 MSA SFF-8431 na SFF- 8472 ◊ Ọnụọgụ ọtụtụ ruo 25.78125Gbps kwa uzo ◊ 503 ike ọkọnọ ruo 3. Oriri ike dị ala ◊ UL certification cables (nhọrọ) ◊ Azụmahịa temp nke na-arụ ọrụ: 0°C ruo +70°C ◊ Ngwa kwekọrọ na RoHS ◊ 4x25Gbe-SR Oke kacha. Nkeji ndetu ọkọnọ voltaji Vcc3 -0.5 - +3.6 V Okpomọkụ Ts -10 - +70 Celsius C arụ ọrụ iru mmiri RH +5 - +85 % 1 Mara: 1 Ọ dịghị condensation akwadoro ọnọdụ ọrụ Tebụl 2- akwadoro ọrụ ọnọdụ Parameter Symbol Min. Oke kacha. Ihe ndetu Unit Na-arụ ọrụ Okpomọkụ TC 0 - +70 Celsius C Na-enye Ike Voltage Vcc 3.14 3.3 3.47 V Nkwụsị ike kwa QSFP28 Pd - - 2.5 W Nkwụsị ike kwa SFP28 Pd - - 1.0 W 1 Bit Rate kwa Lane BR 10.35.1 p. Tebụlụ njirimara eletrọnịkị ọnụ ọnụ ọnụ ọnụ 3- Njirimara eletriki maka akara akara paramita QSFP28 Min. Ụdị. Oke. Nkeji ndetu ModSelL Module Họrọ VOL 0 - 0.8 V Modul anaghị ahọpụta VOH 2.5 - VCC V LPMode Ọnọdụ ike dị ala VIL 0 - 0.8 V Nkịtị Ọrụ VIH 2.5 - VCC +0.3 V Tọgharia VIL 0 - 0.8 VCC Nrụgharị VIL 0 - 0.8 VCC V ModPrsL Ịrụ ọrụ nkịtị VOL 0 - 0.4 V IntL nkwụsị VOL 0 - 0.4 V Normal Operation VoH 2.4 - VCC V Eletriki na-ebufe àgwà dị iche iche ụbọchị ntinye Swing Vin, PP 200 - 1600 mV mmepụta ihe dị iche iche data ọkụ eletrik ZIN 90 000 Ω dị iche iche 100 Mmepụta Swing Vout 200 - 800 mVPP Bit Error Rate BER E-12 1 Ntinye dị iche iche Impedance ZD 90 100 110 Ω Mara: 1 PRBS2^31-1@25.78125Gbps Tebụl 4- Njirimara Eletriki maka SbolFP28. Ụdị. Oke. Nkeji ndetu Ihe nnyefe eletriki njirimara dị iche iche data ntinye Swing Vin,PP 200 - 1600 mVPP Ntinye di iche iche nke impedance ZIN 90 100 110 Ω Tx_Fault Normal Operation VOL 0 - 0.8 V Nrụnye Nrụ Ọrụ VOL 0 - 0.8 V Nrụ Ọrụ Nrụ Ọrụ VCC VOH 2.0_0 -0. V Laser Gbanyụọ VIH 2.0 - VCC+0.3 V Ihe ndị na-anata ọkụ eletrik njirimara dị iche iche ụbọchị mmepụta Vout 400 - 800 mV Bit Error Rate BER - - E-12 - Mpụta Iche Iche Ikwa ZD 90 100 110 Ω Rx_000 110 Ω Rx_08 VH Rx_08 Nkịtị LoH 2.0 - VCC V Nhazi ntụtụ onyonyo 1, Nlele pin maka QSFP28 Tebụl 5- Nkọwa ọrụ ntụtụ maka QSFP28 Pin Akara aha/Nkọwa nkọwa 1 GND Ground 1 2 Tx2n Transmitter Inverted Data Ntinye 3 Tx2p Nnyefe Na-abụghị Ntinye Data 4 GND GND Ntinye data ntụgharị Tx4n 6 Tx4p Transmitter Na-adịghị atụgharị Data Ntinye 7 GND Ground 1 8 ModSelL Module Họrọ 9 ResetL Module Tọgharia 10 Vcc Rx +3.3V Onye Nnweta Ike 11 SCL 2-waya serial interface elekere 12 SDA 2-waya serial interface Ground1 Ground data 13. Onye nnata Mbupute data na-abụghị nke 15 Rx3n 15 Rx3n Onye na-anata 16 GND Ground 1. Ihe nnata Rx2p Nwepu data anaghị atụgharị 23 GND Ground 1 24 Rx4n Onye nnata Mbupute Ntugharị data ntụtụ pin akara aha/nkọwa nkọwa 25 Rx4p nnata na-enweghị ntụgharị 26 GND Ground 1 27 ModPrsL ModPrsL Module M28t28t + 3.3V Onye na-ebunye ọkụ eletrik 30 Vcc1 + 3.3V Ọkụ ọkụ 31 LPMode Ọnọdụ ike dị ala 32 GND Ground 1 33 Tx3p Onye na-ebufe ihe na-abụghị ihe ntinye data 34 Tx3n Transmitter Inverted Data Ntinye 35 GND Ground 1 36 Tx3n Ntugharị Ntugharị 3 Tx1p Ntinye data ntụgharị ntụgharị 38 GND Ground 1 Mara: 1. Ala sekit dịpụrụ adịpụ na ala chassis. Ọgụgụ 2, Nlele Ntụtụ maka SFP28 Tebụl 6-Nkọwa Ọrụ Ngosi Pin Akara Aha/Nkọwa ndetu 1 VEET Module Transmitter Ground 1 2 TX_FAULT Module Transmitter Fault 2 3 TX_DISABLE Transmitter gbanyụọ; Na-agbanyụ mmepụta laser transmitter 3 4 SDA 2-Wire Serial Interface Data Line (MOD-DEF2) 5 SCL 2-Wire Serial Interface Clock (MOD-DEF1) 6 MOD_ABS Module Adịghị, jikọọ na VEET ma ọ bụ VEER na modul 2 7 RS0 Rate Họrọ 0, nhọrọ na-ejikwa SFP+ modul nnata 4 8 RX_LOS Nnata Ọnwụ nke ngosi ngosi (Na FC akpọrọ dị ka Rx_LOS na na Ethernet akpọpụtara dị ka Ọ BỤGHỊ Ịchọta Mgbaama) 2 9 RS1 Rate Họrọ 1, nhọrọ na-ejikwa SFP+ modul transmitter 4 Pin Symbol Aha/Nkọwa ndetu 10 VEER Module Nnata Ground 1 11 VEER Module Ground 1. 12 RD- Mpụta data atụgharịgharị nke nnata 13 RD+ Mpụpụ data anaghị agbanwe agbanwe 14 VEER Module Nnata Ground 1 15 VCCR Module Nnata 3.3 V Nnyefe 16 VCCT Module Transmitter 3.3 V Nnye 17 VEET Module + Na-ebufe Data Ground 1 18 Inverted InTD Ntinye ntinye data ntụgharị 20 VEET Module Transmitter Ground 1 Mara: Obere ala modul dịpụrụ adịpụ na ikpe modul. A ga-eji 4.7K-10Kohms bulite atụdo na voltaji n'etiti 3.14V na 3.46V na bọọdụ nnabata. A na-adọta ntụtụ ahụ ruo VCCT nwere ihe mgbochi 4.7K-10KΩ na modul. Lee SFF-8472 Mkpu12.2 Tebụl 10-2. Ihe osise 3 sekit akwadoro, sekit interface akwadoro maka QSFP28 eserese 4, sekit ọkọnọ ike bọọdụ ndị ọbịa akwadoro maka SFP28 eserese 5, okirikiri Interface akwadoro maka nkọwapụta SFP28 nleba anya onyonyo 6, Map ebe nchekwa maka QSFP28 eserese 7, Map ebe nchekwa maka SFP28 Mechanical Unit mm Figure 8 , Tebụl eserese Mechanical 7- Ogologo eriri eriri USB L1 (Unit: m) Ndinagide (Iji: cm) ≤1.0 +5/-0 1.0＜L≤4.5 +15/-0 4.5＜L≤14.5 +30/-0 ＞14.5 +2%/-0 Tebụl 8- Ngụkọta ogologo ogologo eriri Breakout Cable L1 (Unit: m) Breakout Point Atụtara site na SFPL2 (Unit: m) 1 0.7 2 1.4 3 2 ≥5 3 Ịdọ aka ná ntị Ijikwa kpachara anya: Ngwaọrụ a nwere ike imebi n'ihi mwepu electrostatic (ESD). A na-atụ aro gburugburu ebe kwụ ọtọ n'efu. Soro ntuziaka dabere na usoro ESD kwesịrị ekwesị. Nchekwa Laser: Radiation nke ngwaọrụ laser na-ewepụta nwere ike ịdị ize ndụ nye anya mmadụ. Zere ikpughe anya na radieshon ozugbo ma ọ bụ na-apụtaghị ìhè.

Atụmatụ ♦ Nkwado 2 100Base-FX eriri ọdụ ụgbọ mmiri na 6 10/100Base-T (X) ọdụ ụgbọ mmiri Ethernet. ♦ Nkwado IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Nkwụnye-na-egwu, 10/100Base-T (X), zuru / ọkara duplex, MDI / MDI-X akpaaka-adaptation. ♦ Mgbawa mgbawa mmepụta ihe, 15kV ESD nchebe, 8kV ịwa ahụ nchebe. ♦ DC10-58V redundancy ike, tụgharịa polarity nchebe. ♦ Ụlọ ọrụ mmepụta ihe 4 imewe, -40-85 ° C na-arụ ọrụ okpomọkụ. ♦ IP40 gosiri aluminum alloy ụlọ, DIN-Rail mounted. Okwu Mmalite JHA-IF26 bụ nkwụnye na-egwu na-enweghị njikwa Ethernet ụlọ ọrụ mmepụta ihe, nke nwere ike inye ngwọta akụ na ụba maka Ethernet gị. Ihe mkpuchi uzuzu ya zuru oke (ọkwa nchekwa IP40), nke na-adị ugbu a, oke voltaji na EMC echekwabara, ntinye ike ugboro abụọ yana imepụta mkpu nwere ọgụgụ isi nwere ike inyere ndị ọrụ ụlọ ọrụ sistemu aka nyochaa ọrụ netwọkụ, nke nwere ike. na-arụ ọrụ ntụkwasị obi na gburugburu ebe siri ike ma dị ize ndụ. JHA-IF26 na-akwado 2 100Base-FX eriri ọdụ ụgbọ mmiri na 6 10/100Base-T (X) ọdụ ụgbọ mmiri Ethernet. Ọ na-akwado CE, FCC, ọkọlọtọ RoHS, igwe siri ike siri ike, ntinye ike (DC10-58V). The mgba ọkụ na-akwado IEEE802.3, IEEE802.3u, IEEE802.3x na 10/100Base-T (X), full / ọkara-duplex, na MDI / MDI-X auto-adaptation, na -40-85 ℃ arụ ọrụ okpomọkụ nwere ike izute. ụdị ọ bụla nke ụlọ ọrụ mmepụta ihe chọrọ, na-enye ngwọta a pụrụ ịdabere na ya na nke akụ na ụba maka netwọk Ethernet ụlọ ọrụ gị. Nkọwapụta Protocol Standard IEEE802.3, IEEE802.3u, IEEE802.3x Flow Control IEEE802.3x nchịkwa nchịkwa, nchịkwa nchịkwa azụ na-ebugharị na-ebugharị ọnụego: 1.19Mpps Ọnọdụ nnyefe: Ụlọ ahịa na ForwardPacket Buffer Size: 512KBack Oge igbu oge 1K: 0 Hour,00 Akwụkwọ ikike nke afọ 5 Ụdị ozi usoro nha Ọ dịghị. Nkọwa nke ngwongwo JHA-IF26 Unmanged Industrial Ethernet Switch, 2 100Base-FX na 6 10/100Base-T (X), SC Connector, Multimode, Dual Fiber, 2Km, DIN-Rail, DC10-58V, -40-85 Celsius C Okpomọkụ na-arụ ọrụ JHA-IF26-20 Igwe ọkụ eletrik anaghị arụ ọrụ, 2 100Base-FX na 6 10/100Base-T (X), Njikọ SC, Single Mode, Dual Fiber, 20Km, DIN-Rail, DC10-58V, -40-85 ° C arụ ọrụ okpomọkụ JHA-IF26W-20 Ejikwaghị Industrial Ethernet Switch , 2 100Base-FX na 6 10/100Base-T(X), SC Njikọ, Single Mode, Single Fiber, 20Km, DIN-Rail, DC10-58V, -40-85°C arụ ọrụ okpomọkụ JHA-IFS26 Ejikwa Industrial Ethernet Switch, 2 100Base-X SFP oghere na 6 10/100Base-T (X) , DIN-Rail, DC10-58V, -40-85°C Na-arụ ọrụ okpomọkụ Fiber Njikọ: SC / ST / FC / LC (SFP oghere), Single Mode / Multimode, Dual Fiber / Single Fiber, 2Km / 20Km / 40Km / 60Km / 80Km / 100Km / 120Km bụ Nhọrọ. Ike ọkọnọ: DC24V DIN-Rail Power Supply ma ọ bụ ihe nkwụnye ọkụ bụ Nhọrọ.

Atụmatụ: ◊ Ruo 155Mb/s Data Njikọ ◊ Hot-Pluggable ◊ Duplex LC njikọ ◊ Ruo 2 km na 50/125μm MMF ◊ 1310nm FP Laser transmitter ◊ Single +3.3V Power Supply & 3.3V Power Supply 7 Interface Interface ◊ ◊ Ike kacha 2.0V ma ọ bụ meghere, agbanyere na TDIS 1000 V) Mwepu Electrostatic (ESD) na Duplex LC Receptacle IEC 61000-4-2GR-1089-CORE Dakọtara na ọkọlọtọ InCC Nkeji 15 Klas BEN55022 Klas B (CISPR 22B)VCCI Klas B dakọtara na ọkọlọtọ Laser Eye Safety FDA 21CFR 1040.10 na 1040.11EN60950, EN (IEC) 60825-1,2 dakọtara na klas 1 laser ngwaahịa. • Ndị ọbịa sekit SFP akwadoro akwadoro sekit l Mechanical Dimensions Mechanical Drawing

Atụmatụ ♦ Nkwado 2 1000Base-X SFP oghere na 4 10/100/1000Base-T (X) ọdụ ụgbọ mmiri Ethernet. ♦ Nkwado G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.1p, IEEE802.1x, IEEE802, IEEEQnoo IPv4/IPv6 ụzọ. ♦ Kwado CLI, SNMP, WEB management, Console/Telnet Command-line Management and syslog, na-eji teknụzụ netwọk mgbanaka mepụtara onwe ya, oge mgbake 0 Hour,00 Akwụkwọ ikike nke afọ 5 Ụdị ozi usoro nha Ọ dịghị. Nkọwa nke ngwongwo JHA-MIGS24 jikwaa Industrial Ethernet Switch, 2 1000Base-X SFP oghere na 4 10/100/1000Base-T (X), DIN-Rail, DC10-58V, -40-85 °C Ịrụ ọrụ okpomọkụ ike ọkọnọ : DC24V DIN-Rail ike ọkọnọ ma ọ bụ ihe nkwụnye ọkụ bụ nhọrọ.