Ntụgharị Oghere Usoro ka E1 JHA-CE1Q1

Ntụgharị E1-RS422JHA-CE1Q1

Nchịkọta

Ihe ntụgharị interface a dabere na FPGA, na-enye otu interface E1 yana otu interface serial RS422.Ngwaahịa a na-agbaji site na esemokwu dị n'etiti anya nzikọrịta ozi serial interface ọdịnala na ọnụego nzikọrịta ozi, ewezuga, ọ nwekwara ike dozie nnyonye anya elektrọn, nnyonye anya mgbanaka ala na mmebi ọkụ.Ngwaọrụ na-eme ka ntụkwasị obi dịkwuo mma, nchekwa na nzuzo nke nzikọrịta data.A na-eji ya maka njikwa ụlọ ọrụ dị iche iche, njikwa usoro na oge njikwa okporo ụzọ, ọkachasị maka Bank, na ike na mpaghara ndị ọzọ na sistemụ nwere ihe pụrụ iche chọrọ maka gburugburu nnyonye anya electromagnetic.Ọnụego nzikọrịta ozi serial interface ruru 512KBPS.

Foto ngwaahịa

Ụdị Obere

Atụmatụ

• Dabere na ikike nwebiisinka IC
• Nwee ikike ịchọpụta ọnụọgụ baud nke mgbama ọdụ ụgbọ mmiri na-akpaghị aka
• Nnwale na-akpaghị aka ihe kpatara ngwaọrụ matt bụ na ngwaọrụ agbanyụrụ, ma ọ bụ E1 akara agbajiri.Mgbe ahụ gosi na LED
• Nye 2 impedances: 75 Ohm enweghị nguzozi na 120 Ohm itule;
• Kwado njikwa netwọkụ SNMP
• Ọwa Oghere Usoro nwere ike ibunye data serial nwere ike imegharị n'otu oge 300 Kbps-921.6Kbps baud ọnụego
• Serial data multiplexing na E1 na-akwado ITU-T R.111 jumping code mode
• Serial ọdụ ụgbọ mmiri interface àmụmà-nchedo ruru IEC61000-4-5 (8/20μS) DM (dị iche na ọnọdụ): 6KV, Impedance (2 Ohm), CM (Common Mode): 6KV, Impedance (2 Ohm) ọkọlọtọ.

Oke

♦E1 interface

Interface Standard: soro protocol G.703;

Ọnụego ntanetị: 2048Kbps± 50ppm;

Koodu ntanetịime: HDB3;

Mgbochi: 75Ω (unbalance), 120Ω (balance);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Oghere Usoro interface

  Ọkọlọtọ
EIA/TIA-422 RS-422 (ITU-T V.11)
  Oghere Usoro Interface
RS-422: TxD+, TxD-, RxD+, RxD-, Ala mgbaama

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: 40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Ngwa