10G SFP + kabel Optik Aktif JHA-SFP-10G-AOC
Fitur
◊ Ndhukung aplikasi 10GBASE-SR/10G Fiber Channel
◊ Compliant kanggo SFP + Listrik MSA SFF-8431
◊ Compliant kanggo SFP + Mechanical MSA SFF-8432
◊ Multi rate nganti 11.3Gbps
◊ Jarak transmisi nganti 300m
◊ + 3.3 V sumber daya tunggal
◊ konsumsi daya Low
◊ Suhu kasus operasi Komersial: 0 °C nganti +70 °C
◊ RoHS tundhuk
◊ Proteksi sandhi kanggo A0h lan A2h
Aplikasi
◊ 10GBASE-SR ing 10.31Gbps
◊ InfiniBand QDR, SDR, DDR
◊ pranala optik liyane
Spesifikasi:
Ratings maksimum Absolute
Tabel1- Ratings maksimum Absolute
| Paramèter | Simbol | Min. | Khas | Maks. | Unit | Cathetan |
| Tegangan Pasokan | Vcc3 | -0.5 | - | +3.6 | V | |
| Suhu panyimpenan | Ts | -10 | - | +70 | °C | |
| Kelembapan Operasi | RH | +5 | - | +85 | % | 1 |
| Ambang karusakan panrima | P Rdmg | +3.4 | - | - | dBm |
Cathetan 1: Ora ana kondensasi
Kahanan Operasi sing Disaranake
Tabel2- Kahanan operasi sing disaranake
| Paramèter | Simbol | Min. | Khas | Maks. | Unit | Cathetan |
| Suhu Kasus Operasi | TC | 0 | - | +70 | °C | |
| Tegangan Pasokan Daya | Vcc | 3.14 | 3.3 | 3.47 | V | |
| Power Supply Saiki | Icc | - | - | 150 | mA | |
| Dissipasi Daya | Pd | - | - | 0.6 | W | |
| Bit Rate | BR | - | 10.3125 | - | Gbps | |
| Radius Bend Serat | Rb | 3 | - | - | cm |
Karakteristik Listrik
Tabel3- Karakteristik Listrik
| Paramèter | Simbol | Min. | Tipe. | Maks. | Unit | Cathetan | |
| Pemancar | |||||||
| Swing Input Data Diferensial | Wiwin, PP | 200 | - | 1600 | mVPP | ||
| Impedansi Diferensial Input | ZIN | 90 | 100 | 110 | Ω | ||
| Tx_Fault | Operasi Normal | VOL | 0 | - | 0.8 | V | |
| Kesalahan Pemancar | VOH | 2.0 | - | VCC | V | ||
| Tx_Disable | Operasi Normal | VIL | 0 | - | 0.8 | V | |
| Laser Pateni | VIH | 2.0 | - | VCC+0.3 | V | ||
| panrima | |||||||
| Output Tanggal Diferensial | Vout | 370 | - | 1600 | mV | ||
| Impedansi Diferensial Output | ZD | 90 | 100 | 110 | Ω | ||
| Rx_LOS | Operasi Normal | VOL | 0 | - | 0.8 | V | |
| Kelangan Sinyal | VoH | 2.0 | - | VCC | V | ||
Karakteristik Optik
Tabel4-Karakteristik Optik
| Paramèter | Simbol | Unit | Min | Tipe | Maks | Cathetan |
| Karakteristik pemancar optik | ||||||
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | |
| Rentang Panjang Gelombang Tengah | λc | nm | 820 | 850 | 880 | |
| Daya Mati Laser | Poff | dBm | - | - | -45 | |
| Bukak Daya Optik | P0 | dBm | -6.0 | - | - | 1 |
| Rasio kepunahan | ER | dB | 3 | - | - | |
| Lebar Spektral (RMS) | RMS | nm | - | - | 0.45 | |
| Karakteristik panrima optik | ||||||
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | |
| Bit Error Rate | BER | dBm | - | - | E-12 | 2 |
| Overload Input Optik | PIN | dBm | 2.4 | - | - | 2 |
| daya | ||||||
| Rentang Panjang Gelombang Tengah | λc | nm | 820 | - | 880 | |
| Sensitivitas panrima ingDaya rata-rata | Sen | dBm | - | - | -9.9 | 3 |
| Los Assert | LosA | dBm | -26 | - | - | |
| Los De-Assert | LosD | dBm | - | - | -12 | |
| Los Hysteresis | LosH | dB | 0.5 | - | - | |
Cathetan:
- Digabungake dadi 50/125 MMF.
- Diukur nganggo PRBS 231- 1 pola tes @10.3125Gbps.BER=10E-12
Dianjurake Host Board Power Supply Circuit
Figure 1, Daya Papan Host Dianjurake Sirkuit Pasokan
Dianjurake Interface Circuit
Gambar 2, Recommended Interface Circuit
susunan pin
Gambar 3, Pin View
Tabel5- Fungsi Pin
Definisi
| Pin | Simbol | Jeneng / Katrangan | Cathetan |
| 1 | VEET | Modul Transmitter Ground | 1 |
| 2 | TX_FAULT | Modul Transmitter Fault | 2 |
| 3 | TX_DISABLE | Transmitter Pateni;Pateni output laser pemancar | 3 |
| 4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
| 5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
| 6 | MOD_ABS | Modul Absen, disambungake menyang VEET utawa VEER ing modul | 2 |
| 7 | RS0 | Rate Pilih 0, opsional kontrol panrima modul SFP + | |
| 8 | RX_LOS | Indikasi Sinyal Kehilangan Penerima (Ing FC sing ditunjuk minangka Rx_LOS lan ing Ethernet sing ditunjuk minangka NOT Signal Detect) | 2 |
| 9 | RS1 | Rate Pilih 1, opsional kontrol SFP + modul pemancar | |
| 10 | VEER | Modul Receiver Ground | 1 |
| 11 | VEER | Modul Receiver Ground | 1 |
| 12 | RD- | Receiver Inverted Data Output | |
| 13 | RD+ | Receiver Non-Kuwalik Output Data | |
| 14 | VEER | Modul Receiver Ground | 1 |
| 15 | VCCR | Modul panrima 3.3 V Supply | |
| 16 | VCCT | Modul Transmitter 3.3 V Pasokan | |
| 17 | VEET | Modul Transmitter Ground | 1 |
| 18 | TD+ | Input Data Non-Kuwalik Transmitter | |
| 19 | TD- | Input Data Inverted Transmitter | |
| 20 | VEET | Modul Transmitter Ground | 1 |
Cathetan:
- Pin lemah modul diisolasi saka modul kasus.
- Pin kasebut kudu ditarik munggah kanthi 4.7K-10Kohms menyang voltase antarane 3.14V lan 3.46V ing host papan.
- Pin ditarik nganti VCCT kanthi resistor 4.7K-10KΩ ing modul.
Spesifikasi Monitoring
Gambar 4, Peta Memori
Diagram Desain Mekanik
Unit: mm
Tabel6- Kabel
dawa
| Dawane kabelL(Unit: m） | Sabar(Unit: cm） |
| ≤1.0 | +5/-0 |
| 1.0<L≤4.5 | +15/-0 |
| 4.5<L≤14.5 | +30/-0 |
| > 14.5 | +2%/-0 |
Pènget
Pancegahan Penanganan:Piranti iki gampang rusak amarga discharge elektrostatik (ESD). Lingkungan bebas statis dianjurake banget.Tindakake pedoman miturut prosedur ESD sing tepat.
Safety Laser: Radiasi sing dipancarake dening piranti laser bisa mbebayani kanggo mata manungsa.Ngindhari sinar mata langsung utawa ora langsung.
