10G SFP+ Active Optical cable JHA-SFP-10G-AOC
Features
◊ Tsigira 10GBASE-SR/10G Fiber Channel application
◊ Inopindirana neSFP+ Electrical MSA SFF-8431
◊ Inoenderana neSFP+ Mechanical MSA SFF-8432
◊ Multi rate inosvika 11.3Gbps
◊ Kutapurirana kureba kusvika ku300m
◊ +3.3V magetsi ega ega
◊ Kuderera kwesimba rekushandisa
◊ Inoshanda kesi temp Yekutengesa: 0°C kusvika +70 °C
◊ RoHS inoenderana
◊ Dziviriro yepassword yeA0h uye A2h
Applications
◊ 10GBASE-SR pa10.31Gbps
◊ InfiniBand QDR, SDR, DDR
◊ Zvimwe zvinongedzo zvinongedzo
Tsanangudzo:
Absolute Maximum Ratings
Tafura1- Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Supply Voltage | Vcc3 | -0.5 | - | +3.6 | V | |
| Storage Temperature | Ts | -10 | - | +70 | °C | |
| Kushanda Humidity | RH | +5 | - | +85 | % | 1 |
| Receiver Kukuvadza Threshold | P Rdmg | +3.4 | - | - | dBm |
Note1: Hapana condensation
Yakakurudzirwa Operating Conditions
Tafura2- Yakakurudzirwa kushanda Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Operating Case Temperature | TC | 0 | - | +70 | °C | |
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.47 | V | |
| Power Supply Current | Icc | - | - | 150 | mA | |
| Kuparadza Simba | Pd | - | - | 0.6 | W | |
| Bit Rate | BR | - | 10.3125 | - | Gbps | |
| Fiber Bend Radius | Rb | 3 | - | - | cm |
Electrical Characteristics
Tafura3- Electrical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
| Transmitter | |||||||
| Differential Data Input Swing | Vin, PP | 200 | - | 1600 | mVPP | ||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
| Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | |
| Transmitter Fault | VOH | 2.0 | - | VCC | V | ||
| Tx_Disable | Normal Operation | VIL | 0 | - | 0.8 | V | |
| Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | ||
| Receiver | |||||||
| Differential Date Output | Vout | 370 | - | 1600 | mV | ||
| Output Differential Impedance | ZD | 90 | 100 | 110 | Ω | ||
| Rx_LOS | Normal Operation | VOL | 0 | - | 0.8 | V | |
| Lose Signal | VoH | 2.0 | - | VCC | V | ||
Optical Characteristics
Tafura4-Optical Hunhu
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Optical transmitter Hunhu | ||||||
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | |
| Center Wavelength Range | λc | nm | 820 | 850 | 880 | |
| Laser Off Power | Poff | dBm | - | - | -45 | |
| Tanga Optical Power | P0 | dBm | -6.0 | - | - | 1 |
| Extinction Ratio | ER | dB | 3 | - | - | |
| Spectral Width(RMS) | RMS | nm | - | - | 0.45 | |
| Optical Receiver Hunhu | ||||||
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | |
| Bit Error Rate | BER | dBm | - | - | E-12 | 2 |
| Overload Input Optical | PIN | dBm | 2.4 | - | - | 2 |
| Simba | ||||||
| Center Wavelength Range | λc | nm | 820 | - | 880 | |
| Receiver Sensitivity mukatiAvhareji Simba | Sen | dBm | - | - | -9.9 | 3 |
| Los Assert | LosA | dBm | -26 | - | - | |
| Los De-Assert | LosD | dBm | - | - | -12 | |
| Los Hysteresis | LosH | dB | 0.5 | - | - | |
Cherechedza:
- Yakabatanidzwa mu50/125 MMF.
- Yakayerwa nePRBS 231-1 test pattern @10.3125Gbps.BER=10E-12
Yakakurudzirwa Host Board Power Supply Circuit
Mufananidzo 1, Yakakurudzirwa Host Board Power Supply Circuit
Yakakurudzirwa Interface Circuit
Mufananidzo 2, Yakakurudzirwa Interface Circuit
Pini kuronga
Mufananidzo 3, Pin View
Tafura5-Pini Basa
Tsanangudzo
| Pin | Symbol | Zita/Tsanangudzo | Notes |
| 1 | VEET | Module Transmitter Ground | 1 |
| 2 | TX_FAULT | Module Transmitter Fault | 2 |
| 3 | TX_DISABLE | Transmitter Disable;Inodzima transmitter laser kubuda | 3 |
| 4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
| 5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
| 6 | MOD_ABS | Module Absent, yakabatana neVEET kana VEER mune module | 2 |
| 7 | RS0 | Rate Sarudza 0, inodzora SFP + module inogamuchira | |
| 8 | RX_LOS | Receiver Kurasika kweSiginari Chiratidzo (MuFc yakasarudzwa seRx_LOS uye muEthernet yakasarudzwa seNOTI Signal Detect) | 2 |
| 9 | RS1 | Rate Sarudza 1, inodzora SFP + module transmitter | |
| 10 | VEER | Module Receiver Ground | 1 |
| 11 | VEER | Module Receiver Ground | 1 |
| 12 | RD- | Receiver Inverted Data Output | |
| 13 | RD+ | Receiver Kwete-Inverted Data Output | |
| 14 | VEER | Module Receiver Ground | 1 |
| 15 | VCCR | Module Receiver 3.3 V Supply | |
| 16 | VCCT | Module Transmitter 3.3 V Supply | |
| 17 | VEET | Module Transmitter Ground | 1 |
| 18 | TD+ | Transmitter Isina-Inverted Data Input | |
| 19 | TD- | Transmitter Inverted Data Input | |
| 20 | VEET | Module Transmitter Ground | 1 |
Cherechedza:
- Iyo module yepasi pini yakaparadzaniswa kubva kune module case.
- Mapini achadhonzwa ne4.7K-10Kohms kune voltage iri pakati pe3.14V ne3.46V pane host. board.
- Iyo pini inodhonzwa kusvika kuVCCT ine 4.7K-10KΩ resistor mu module.
Monitoring Specification
Mufananidzo 4, Memory Mepu
Mechanical Dhizaini Dhizaini
Chikamu:mm
Tafura6- Cable
Urefu
| Cable LengthL(Chikamu: m） | Anoshivirira(Chikamu: cm） |
| ≤1.0 | +5/-0 |
| 1.0＜L≤4.5 | +15/-0 |
| 4.5＜L≤14.5 | +30/-0 |
| ＞14.5 | +2%/-0 |
Yambiro
Kubata Chengetedzo:Mudziyo uyu unogona kukuvara nekuda kwe electrostatic discharge (ESD).A static free environment inokurudzirwa zvikuru.Tevedzera nhungamiro zvinoenderana nekwakakodzera ESD maitiro.
Laser Kuchengeteka: Radiation inoburitswa nelaser zvishandiso inogona kuve nengozi kumaziso evanhu.Dzivisa kuratidzwa kweziso kune yakananga kana isina kunanga mwaranzi.
