QSFP+/4-SFP+ Active Optical Cables JHA-QSFP-4SFP-40G-AOC
◊ Tsigira 40-4 * 10GBASE-SR application
◊ Magetsi interface inoenderana neQSFP + yekubatanidza (SFF-8436)uye SFP+ connector (SFF-8431)
◊ 850nm VCSEL transmitter, PIN pikicha-detector inogamuchira
◊ Multi rate inosvika 10.3125Gbps panzira
◊ Inoshanda kesi tembiricha: 0 kusvika 70 ℃
◊ +3.3V magetsi ekupa magetsi
◊ Kuderera kwesimba rekushandisa
◊ RoHS inoenderana
◊ UL certification cables (optional)
Applications
◊ 40-4*10 Gbe-SR
◊ Fiber Channel Zvishandiso
◊ InfiniBand QDR, SDR, DDR
◊ Masevha, switch, chengetedzo uye anotambira kadhi adapta, nezvimwe.
Zvinodiwa:
Absolute Maximum Ratings
| Parameter | Symbol | Min | Typical | Max | Unit |
| Storage Temperature | TS | -10 | - | +85 | ℃ |
| Kushanda Humidity | RH | +5 | - | +85 | % |
| Supply Voltage | VCC | -0.5 | +3.3 | +3.6 | V |
Yakakurudzirwa Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
| Operating Case Temperature | TC | 0 |
| +70 | ℃ |
| Supply Voltage | VCC | +3.14 | +3.3 | +3,47 | V |
| Supply current (QSFP+) | ICC | - | - | 450 | mA |
| Supply current (SFP+) (per terminal) |
| - | - | 150 | mA |
| Channel Data Rate | Dr |
| 10.3125 | - | Gbps |
| Fiber bend radius | - | 3 | - | - | CM |
Magetsi uye Optical maitiro
Mamiriro akayerwa: Channel Data Rate 10.3125Gbps, VRCCR=3.3V, PRBS31, Nyaya Inoshanda Tembiricha 0~70℃
Transmitter
| Parameter | Symbol | Min | Typical | Max | Unit |
| Center Wavelength | λc | 830 | 850 | 870 | nm |
| RMS spectral width | Pm | - | - | 0.45 | nm |
| Avhareji yekuvhura simba, nzira yega yega | PAVG | -6.0 | - | +2.4 | dBm |
| Extinction Ratio | ER | 3.0 | - | - | dB |
| Input differential swing | Vin PP | 200 | - | 1600 | mV |
| Input differential impedance | Zin | 90 | 100 | 110 | Ω |
Receiver
| Parameter | Symbol | Min | Typical | Max | Unit |
| Center Wavelength | λc | 830 | 850 | 870 | nm |
| Bit Error Rate | BER | - | - | E-12 |
|
| Differential Data Output Swing | Ipa PP | 400 | - | 1000 | mV |
| Output Differential Impedance | Zout | 90 | 100 | 110 | Ω |
QSFP +Pin Tsanangudzo
| PIN | Zita | Basa/ Tsanangudzo | |
| 1 | GND | Module Ground | |
| 2 | Tx2n | Transmitter inverted data input | |
| 3 | Tx2p | Transmitter isina-inverted data input | |
| 4 | GND | Module Ground | |
| 5 | Tx4n | Transmitter inverted data input | |
| 6 | Tx4p | Transmitter isina-inverted data input | |
| 7 | GND | Module Ground | |
| 8 | MODSEIL | Module Sarudza | |
| 9 | ResetL | Module Reset | |
| 10 | VCCRx | +3.3v Receiver Power Supply | |
| 11 | SCL | 2-waya Serial interface wachi | |
| 12 | SDA | 2-waya seri interface data | |
| 13 | GND | Module Ground | |
| 14 | RX3p | Receiver isina-inverted data kubuda | |
| 15 | RX3n | Receiver inverted data kubuda | |
| 16 | GND | Transmitter Power Supply | |
| 17 | RX1p | Receiver isina-inverted data kubuda | |
| 18 | RX1n | Receiver inverted data kubuda | |
| 19 | GND | Module Ground | |
| 20 | GND | Module Ground | |
| 21 | RX2n | Receiver inverted data kubuda | |
| 22 | RX2p | Receiver isina-inverted data kubuda | |
| 23 | GND | Module Ground | |
| 24 | RX4n | Receiver inverted data kubuda | |
| 25 | RX4p | Receiver isina-inverted data kubuda | |
| 26 | GND | Module Ground | |
| 27 | ModPrsL | Module Present, yemukati yakadhonzwa pasi kuGND | |
| 28 | IntL | Kukanganisa kuburitsa, kunofanirwa kudhonzwa kumusoro pane host board | |
| 29 | VCCTx | +3.3v Transmitter Power Supply | |
| 30 | VCC1 | + 3.3v Power Supply | |
| 31 | LPMode | Low Power Mode | |
| 32 | GND | Module Ground | |
| 33 | Tx3p | Transmitter isina-inverted data input | |
| 34 | Tx3n | Transmitter inverted data input | |
| 35 | GND | Module Ground | |
| 36 | Tx1p | Transmitter isina-inverted data input | |
| 37 | Tx1n | Transmitter inverted data input | |
| 38 | GND | Module Ground | |
SFP +Pin Tsanangudzo
| Pin | Symbol | Zita/Tsanangudzo | Notes |
| 1 | VEET | Module Transmitter Ground | 1 |
| 2 | TX_FAULT | Module Transmitter Fault | 2 |
| 3 | TX_DISABLE | Transmitter Disable;Inodzima transmitter laser kubuda | 3 |
| 4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
| 5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
| 6 | MOD_ABS | Module Absent, yakabatana neVEET kana VEER mune module | 2 |
| 7 | RS0 | Rate Sarudza 0, inodzora SFP + module inogamuchira | |
| 8 | RX_LOS | Receiver Kurasika kweSiginari Chiratidzo (MuFc yakasarudzwa seRx_LOS uye muEthernet yakasarudzwa seNOTI Signal Detect) | 2 |
| 9 | RS1 | Rate Sarudza 1, inodzora SFP + module transmitter | |
| 10 | VEER | Module Receiver Ground | 1 |
| 11 | VEER | Module Receiver Ground | 1 |
| 12 | RD- | Receiver Inverted Data Output | |
| 13 | RD+ | Receiver Kwete-Inverted Data Output | |
| 14 | VEER | Module Receiver Ground | 1 |
| 15 | VCCR | Module Receiver 3.3 V Supply | |
| 16 | VCCT | Module Transmitter 3.3 V Supply | |
| 17 | VEET | Module Transmitter Ground | 1 |
| 18 | TD+ | Transmitter Isina-Inverted Data Input | |
| 19 | TD- | Transmitter Inverted Data Input | |
| 20 | VEET | Module Transmitter Ground | 1 |
Mechanical Dhizaini Dhizaini
Tafura 1
| Cable LengthL1(Chikamu: m） | Anoshivirira(Chikamu:cm） |
| ＜1.0 | +5/-0 |
| 1.0~4.5 | +15/-0 |
| 5.0~14.5 | +30/-0 |
| ≥15.0 | +2%/-0 |
Tafura 2
| UrefuL1(Chikamu: m） | Hurefu L2(Chikamu: m） |
| 1.0 | 0.7 |
| 2 | 1.4 |
| 3 | 2 |
| ≥5.0 | 3 |
Yambiro
Kubata Chengetedzo:Mudziyo uyu unogona kukuvara nekuda kwe electrostatic discharge (ESD).
A static free environment inokurudzirwa zvikuru.Tevedzera nhungamiro zvinoenderana nekwakakodzera ESD maitiro.
Laser Safety:Mwaranzi inobudiswa nelaser michina inogona kuva nengozi kumaziso evanhu.Dzivisa kuratidzwa kweziso kune yakananga kana isina kunanga mwaranzi.
