10/100/1000BASE-T Koporo SFP Transceiver JHA3401
Likaroloana:
♦ Ho fihla ho 1.25Gb/s lihokelo tsa data tsa bi-directional
♦ Letlapa la SFP le chesang le chesang
♦ Mocheso oa mocheso o atolositsoeng (-40°C ho ea ho +85°C)
♦ Sekoahelo sa tšepe ka botlalo bakeng sa EMI e tlase
♦ Ho senya matla a tlaase
♦ Kopano ea sehokelo sa Compact RJ-45
♦ Lintlha tse qaqileng tsa sehlahisoa ho EEPROM
♦ +3.3V phepelo ea motlakase e le 'ngoe
♦ Ho fihlella IC ea 'mele ka 2-wire serial bese
♦ Ts'ebetso ea 10/100/1000 BASE-T lits'ebetsong tse amohelang batho ka sebopeho sa SGMII
♦ E lumellana le SFP MSA
♦ E lumellana le IEEE Std 802.3TM-2002
♦ E lumellana le FCC 47 CFR Karolo ea 15, Sehlopha sa B
♦ Lihlahisoa tse lumellanang le RoHS
Lisebelisoa:
♦ 1.25 Gigabit Ethernet ka holim'a thapo ea Cat 5
♦ Fetola / Router ho Switch / Router Link
♦ I / O ea lebelo le phahameng bakeng sa li-severs tsa lifaele
Tlhaloso:
JHA3401 10/100/1000BASE-T transceiver ea koporo ea SFP ke ts'ebetso e phahameng, e sebetsang ka theko e tlaase e lumellana le Gigabit Ethernet le litekanyetso tsa 10/100/1000BASE-T joalokaha ho boletsoe ho IEEE 802. 3-2002 le IEEE 802.310/2 100/1000Mbps data- rate ho fihla ho limithara tse 100 e fihla holim'a cable e sa sirelelitsoeng e sothehileng ea sehlopha sa 5.JHA3401 e ts'ehetsa 10/100/1000 Mbps lihokelo tsa data tse felletseng tse nang le matšoao a 5-level Pulse Amplitude Modula-tion (PAM).Lipara tse 'ne ka har'a thapo li sebelisoa ka sekhahla sa matšoao ho 250Mbps para e 'ngoe le e 'ngoe.JHA3401 e fana ka tlhaiso-leseling e tloaelehileng ea serial ID e tsamaellanang le SFP MSA, e ka fihlellehang ka aterese ea A0h ka protocol ea 2-wire serial CMOS EEPROM.IC ea 'mele e ka fumaneha hape ka 2-wire serial bese atereseng ea ACh.
•SFP ho Host Connector Pin Out
| Pin | Lebitso la lets'oao | Tlhaloso | Lintlha tsa MSA |
| 1 | VEET | Sebaka sa transmitter (se tloaelehileng le sebaka sa moamoheli) |
|
| 2 | TLHOKOMELISO | Phoso ea Transmitter.Ha e tšehetsoe | Hlokomela 1 |
| 3 | TDIS | Transmitter Disable.PHY e holofetse holimo kapa e butsoe | Ntlha ea 2 |
| 4 | MOD_DEF(2) | Tlhaloso ea Mojule 2. Mohala oa data bakeng sa ID ea Serial. | Ntlha ea 3 |
| 5 | MOD_DEF(1) | Tlhaloso ea Mojule 1. Mohala oa oache oa Serial ID. | Ntlha ea 3 |
| 6 | MOD_DEF(0) | Tlhaloso ea Mojule 0. E thehiloe ka har'a mojule. | Ntlha ea 3 |
| 7 | Rate Khetha | Ha ho khokahano e hlokahalang |
|
| 8 | TLHOKOMELO | Tahlehelo ea Letšoao - Phahameng e Bontša Tahlehelo ea Letšoao | Ntlha ea 4 |
| 9 | VEER | Receiver Ground (e tloaelehileng sebakeng sa transmitter) |
|
| 10 | VEER | Receiver Ground (e tloaelehileng sebakeng sa transmitter) |
|
| 11 | VEER | Receiver Ground (e tloaelehileng le sebaka sa transmitter) |
|
| 12 | RD- | Receiver e Inverted DATA kantle.AC e kopantsoe | Ntlha ea 5 |
| 13 | RD+ | Receiver DATA e sa kengoang e tsoile.AC e kopantsoe | Ntlha ea 5 |
| 14 | VEER | Receiver Ground (e tloaelehileng sebakeng sa transmitter) |
|
| 15 | VCCR | Phepelo ea Matla a Receiver | Ntlha ea 6 |
| 16 | VCCT | Phepelo ea Matla a Transmitter | Ntlha ea 6 |
| 17 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) |
|
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Couped. | Ntlha ea 7 |
| 19 | TD- | Transmitter Inverted DATA in. AC Couped. | Ntlha ea 7 |
| 20 | VEET | Transmitter Ground (e tloaelehileng le sebaka sa moamoheli) |
|
Lintlha:
1. TX Fault ha e sebelisoe 'me e lula e tlameletsoe fatše ka 100 ohm resistor.
2. TX Disable joalokaha e hlalositsoe ho MSA ha e sebetse ho mojule oa 1000BASE-T, empa e sebelisetsoa ho nolofatsa e le ho kenya letsoho ho tsosolosa ASIC ea ka hare.Pini ena e huloa ka har'a mojule ka mohanyetsi oa 4.7 KW.
Tlase (0 - 0.8 V): Transceiver e butsoitse
Pakeng tsa (0.8 V le 2.0 V): Ha e hlalosoe
Holimo (2.0 - 3.465 V): Transceiver e boemong ba ho tsosolosa
Bula: Transceiver e maemong a ho seta bocha
3. Mod-Def 0,1,2.Tsena ke li-pins tsa tlhaloso ea module.Li lokela ho huleloa ka sehanyetsi sa 4.7-10 KW botong ea baeti ho fana ka phepelo e ka tlase ho VCCT + 0.3 V kapa VCCR + 0.3 V.
Mod Def 0 e tlameletsoe fatše ka 100 ohm resistor ho bontša hore mojule o teng.
Mod-Def 1 ke mohala oa oache oa sehokelo sa terata tse peli bakeng sa ID ea serial ea boikhethelo
Mod-Def 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa ID ea serial ea boikhethelo
4. LVTTL e lumellana le matla a phahameng a 2.5V.Ha e tšehetsoe ho HTSFP-24-111X
5. RD-/+: Tsena ke liphetho tse fapaneng tsa moamoheli.Ke mela e fapaneng ea ac e kopantsoeng ea 100 ohm e lokelang ho felisoa ka phapang ea 100 ohm ho SerDes ea mosebelisi.The ac coupling e etsoa ka hare ho module mme ka hona ha e hlokehe ho boto ea baeti.Phapang ea motlakase mehalang ena e tla ba lipakeng tsa 370 le 2000 mV phapang (185 - 1000 mV single e felile) ha e felisitsoe ka nepo.Maemo ana a tsamaisana le li-voltage tsa CML le LVPECL.
6. VCCR le VCCT ke lisebelisoa tsa motlakase tse amohelang le ho fetisa.Li hlalosoa e le 3.3 V ± 5% ho pini ea sehokelo sa SFP.Boholo ba phepelo ea hona joale bo ka ba 300mA mme lebelo le amanang le ho potlaka ha hona joale ha le na ho feta 30 mA kaholimo ho boemo bo tsitsitseng kamora 500 nanoseconds.
7. TD-/+: Tsena ke lisebelisoa tse fapaneng tsa transmitter.Ke mela e fapaneng ea ac e kopantsoeng e nang le 100 W ea ho emisa ka har'a mojule.The ac coupling e etsoa ka hare ho module mme ka hona ha e hlokehe ho boto ea baeti.Lisebelisoa li tla amohela liphetoho tse fapaneng tsa 500 - 2400 mV (250 -1200 mV single e felile), leha ho khothaletsoa hore boleng bo pakeng tsa 500 le 1200 mV phapang (250 - 600 mV single e felile) e sebelisoe bakeng sa ts'ebetso e ntle ea EMI.Maemo ana a tsamaisana le li-voltage tsa CML le LVPECL.
Setšoantšo sa linomoro tsa pin tsa "host board connector block" le mabitso
•+3.3V Volt Motlakase Motlakase Interface
JHA3401 e na le mefuta e mengata ea motlakase ea 3.3 V +/- 5%.Matla a phahameng a 4 V ha a lumelloe bakeng sa ts'ebetso e tsoelang pele.
| Paramethara | Letšoao | Min. | E tloaelehileng | Max. | Diyuniti | Lintlha/Maemo |
| Phepelo ea Hona Joale | Is |
| 320 | 375 | mA | Matla a maholo a 1.2W holim'a mefuta eohle ea motlakase le mocheso.Sheba tlhokomeliso e ka tlase |
| Kenya Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | E bua ka GND |
| Surge Current | Isurge |
| 30 |
| mA | Hot plug ka holim'a boemo bo tsitsitseng ba hona joale.Sheba tlhokomeliso |
Tlhokomeliso: Tšebeliso ea matla le ho phahama hona joale ho phahame ho feta litekanyetso tse boletsoeng ho SFP MSA
•Lipontšo tsa lebelo le tlase
MOD_DEF(1) (SCL) le MOD_DEF(2) (SDA), ke matshwao a matshwao a CMOS a metsi a bulehileng.Ka bobeli MOD_ DEF(1) le MOD_DEF(2) li tlameha ho huleloa ho host_Vcc.
| Paramethara | Letšoao | Min. | Max. | Diyuniti | Lintlha/Maemo |
| SFP Sehlahisoa TLASE | TLHOKOMELO | 0 | 0.5 | V | 4.7k ho isa ho 10k hula-ho fihlela ho host_Vcc. |
| SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 | V | 4.7k ho isa ho 10k hula-ho fihlela ho host_Vcc. |
| Kenyelletso ea SFP TLASE | VIL | 0 | 0.8 | V | 4.7k ho 10k hula-ho fihlela Vcc. |
| Kenyelletso ea SFP HIGH |
| 2 | Vcc + 0.3 V | V | 4.7k ho 10k hula-ho fihlela Vcc. |
•Sehokelo sa Motlakase sa Lebelo le Phahameng
Lipontšo tsohle tsa lebelo le phahameng li kopantsoe ka AC ka hare.
| Mohala oa phetiso-SFP | ||||||
| Paramethara | Letšoao | Min. | E tloaelehileng | Max. | Diyuniti | Lintlha/Maemo |
| Maqhubu a Line | fL |
| 125 |
| MHz | Khouto ea maemo a 5, ho latela IEEE 802.3 |
| Tx Output Impedance | Tloha, TX |
| 100 |
| Ohm | Phapang |
| Rx Input Impedance | Zin,RX |
| 100 |
| Ohm | Phapang |
| Host-SFP | ||||||
| Paramethara | Letšoao | Min. | E tloaelehileng | Max. | Diyuniti | Lintlha/Maemo |
| Phetoho e le 'ngoe ea ho kenya data | Vinsing | 250 | 1200 | mV | Motho a le mong o felile | |
| Phetoho e le 'ngoe ea tlhahiso ea data | Ho rotha | 350 | 100 | 800 | mV | Motho a le mong o felile |
| Nako ea ho phahama/hoetla | Tr, Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance | Zin | 50 | Ohm | Motho a le mong o felile | ||
| Rx Output Impedance | Tloha | 50 | Ohm | Motho a le mong o felile | ||
• Litlhaloso Kakaretso
| Paramethara | Letšoao | Min. | E tloaelehileng | Max. | Diyuniti | Lintlha/Maemo |
| Sekhahla sa Lintlha | BR | 100 |
| 1,000 | Mb/s | IEEE 802.3 e lumellana. |
| Bolelele ba Cable | L |
|
| 100 | m | Sehlopha sa 5 UTP.BER <10-12 |
•Litlhaloso tsa Tikoloho
JHA3401 e na le sebaka se atolositsoeng ho tloha ho 0°C ho ea ho +85°C joalo ka ha ho boletsoe ho Lethathamo la 7.
| Paramethara | Letšoao | Min. | E tloaelehileng | Max. | Diyuniti | Lintlha/Maemo |
| Mocheso oa ho sebetsa | Holimo | 0 |
| 85 | °C | Mocheso oa mocheso |
| Mocheso oa polokelo | Tsto | -40 |
| 100 | °C | Mocheso oa tikoloho |
•Litaba tsa memori ea serial ID
| Aterese ea Lintlha | Bolelele (Byte) | Lebitso la Bolelele | Tlhaloso le Litaba |
| Libaka tsa ID tsa Motheo | |||
| 0 | 1 | Sekhetho | Mofuta oa serial transceiver (03h=SFP) |
| 1 | 1 | Reserved | Sekhetho se atolositsoeng sa mofuta oa serial transceiver (04h) |
| 2 | 1 | Sehokedi | Khoutu ea mofuta oa sehokelo sa mahlo (22=RJ45) |
| 3-10 | 8 | Transceiver | 1000BASE-T |
| 11 | 1 | Khouto | 8B10B (01h) |
| 12 | 1 | BR, Lebitso | Sekhahla sa baud ka lebitso, yuniti ea 100Mbps |
| 13 | 1 | Reserved | (0000h) |
| 14 | 1 | Bolelele(9um,km) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa 9/125um fiber, likarolo tsa km |
| 15 | 1 | Bolelele(9um) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa 9/125um fiber, likarolo tsa 100m |
| 16 | 1 | Bolelele(50um) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa fiber ea 50/125um, likarolo tsa 10m |
| 17 | 1 | Bolelele(62.5um) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa fiber ea 62.5/125um, likarolo tsa 10m |
| 18 | 1 | Bolelele(Koporo) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa koporo, li-unit tsa limithara |
| 19 | 1 | Reserved | |
| 20-35 | 16 | Lebitso la morekisi | Lebitso la morekisi oa SFP: JHA Technology Co., Ltd |
| 36 | 1 | Reserved | |
| 37-39 | 3 | Morekisi OUI | SFP transceiver morekisi oa OUI ID |
| 40-55 | 16 | Morekisi PN | Nomoro ea Karolo: "JHA3401" (ASCII) |
| 56-59 | 4 | Morekisi rev | Boemo ba ntlafatso bakeng sa karolo ea nomoro |
| 60-61 | 2 | Wavelength | Laser wavelength |
| 62 | 1 | Reserved | |
| 63 | 1 | CCID | Bonyane boholo ba li-byte tsa kakaretso ea data atereseng ea 0-62 |
| Libaka tsa ID tse Atolositsoeng | |||
| 64-65 | 2 | Khetho | E bontša hore na ke mats'oao afe a SFP a kenngoeng tšebetsong (001Ah = LOS, TX_FAULT, TX_DISABLE kaofela a tšehelitsoe) |
| 66 | 1 | BR, max | Sekhahla sa sekhahla se holimo, likarolo tsa% |
| 67 | 1 | BR, mots | Sekhahla se tlase, likarolo tsa % |
| 68-83 | 16 | Morekisi SN | Nomoro ea serial (ASCII) |
| 84-91 | 8 | Khoutu ea letsatsi | Khoutu ea letsatsi la tlhahiso |
| 92-94 | 3 | Reserved | |
| 95 | 1 | CCEX | Sheba khoutu bakeng sa Libaka tse atolositsoeng tsa ID (liaterese 64 ho isa ho 94) |
| Libaka tsa ID tse khethehileng tsa barekisi | |||
| 96-127 | 32 | E balehang | Letsatsi le ikhethileng la morekisi, le baloang feela |
•Mechanical Dimensions
Litekanyo tsa Mechini tsa Transceiver
JHA e na le tokelo ea ho etsa liphetoho lihlahisoa kapa tlhahisoleseding e teng mona ntle le tsebiso.Ha ho molato o nkuoang ka lebaka la ts'ebeliso ea bona kapa ts'ebeliso ea bona.Ha ho na litokelo tlas'a patent efe kapa efe e tsamaisanang le thekiso ea lihlahisoa kapa tlhaiso-leseling e joalo.
E hatisitsoe ke Shenzhen JHA Technology Co., Ltd
Copyright © Shenzhen JHA Technology Co., Ltd
Litokelo tsohle li sirelelitsoe
