Lihlahisoa tse Ncha tse chesang Usb Ho ea ho Rs232 Converter - E1-31 Channel RS232/RS422/RS485 Converter JHA-CE1D31/R31/Q31 – JHA

E1-31 Channel RS232/RS422/RS485 ConverterJHA-CE1D31/R31/Q31

Kakaretso

Sesebelisoa sena sa ho fetolela se thehiloe ho FPGA, se fana ka phetisetso ea 31Channel RS232/485/422 ho sebopeho sa E1. Sehlahisoa se senya likhohlano lipakeng tsa sebaka sa puisano sa serial interface le sekhahla sa puisano, ntle le moo, se ka rarolla tšitiso ea motlakase, tšitiso ea lesale la fatše le tšenyo ea lehalima. Sesebelisoa se ntlafatsa haholo ts'epo, ts'ireletso le lekunutu la puisano ea data. E sebelisoa haholo bakeng sa taolo ea liindasteri tse fapaneng, taolo ea ts'ebetso le linako tsa taolo ea sephethephethe, haholo bakeng sa Banka, le Matla le likarolo tse ling le litsamaiso tse nang le litlhoko tse ikhethang tsa tikoloho ea tšitiso ea motlakase. Seteishene sa RS232/RS485/RS422 se ka fetisetsa data ea serial e feto-fetohang ka mokhoa o tšoanang 0Kbps-14400bps sekhahla sa baud.

Setšoantšo sa Sehlahisoa

19inch 1U mofuta

Likaroloana

• E ipapisitse le IC ea boinotšing
• Ts'ehetso ea mohala oa 3 RS232 (TXD, RXD, GND), tšehetso bakeng sa taolo ea phallo ea CD, DSR, CTS
• Eba le tse tharo tsa Loop Back Mode: E1 interface Loop Back (ANA),RS232/485/422 segokanyimmediamentsi sa sebolokigolo Loop Back(DIG),Laela sebopeho se hole sa RS232/485/422 Loop Back(REM)
• RS232/RS485/RS422 e tšehetsa hot-plug, e tšehetsa khokahano ea sesebelisoa sa DTE kapa DCE
• Seteishene sa RS232/RS485/RS422 se ka fetisetsa data ea serial e feto-fetohang ka mokhoa o tšoanang 0Kbps-14400bps sekhahla sa baud
• Eba le ts'ebetso ea tlhahlobo ea khoutu e sa reroang ea pseudo, mohala o butsoe habonolo, o ka sebelisoa joalo ka 2M BER Tester
• Serial port interface lehalima-ts'ireletso e fihlile IEC61000-4-5 (8/20μS) DM(Mokhoa o fapaneng): 6KV, Impedance (2 Ohm), CM(Mokhoa o Tloaelehileng): 6KV, Impedance (2 Ohm) standard
• Fana ka 2 impedances: 75 Ohm ho se leka-lekane le 120 Ohm ho leka-lekana;
• E ka theha E1 serial converter (A) - E1 fiber optic Modem (B) - fiber serial Modem (C) topology
• AC 220V, DC-48V, DC+24V, DC Power le Polarity-Free

Mekhahlelo

♦Sehokelo sa E1

Interface Standard: lumellana le protocol G.703;

Sekhahla sa Sehokelo: 2048Kbps ± 50ppm;

Khoutu ea Sehokelo: HDB3;

Tšitiso: 75Ω (ho se leka-lekane), 120Ω (ho leka-lekana);

Jitter tolerance: Ho latela protocol G.742 le G.823

Tlhokomelo e lumelletsoeng: 0 ~ 6dBm

♦Sebopeho sa serial

Standard

EIA/TIA-232 RS-232 (ITU-T V.28)

EIA/TIA-422 RS-422 (ITU-T V.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Sebui sa serial

RS-422: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 4 lithapo: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 2 lithapo: Data+(Correspond TX+), Data-（Ikopanye le TX-）, Sebaka sa Pontšo

RS-232: RXD, TXD, Signal Ground

♦Tikoloho ya mosebetsi

Mocheso o sebetsang: -10°C ~ 50°C

Mongobo o sebetsang: 5% ~ 95% (ha ho condensation)

Mocheso oa polokelo: -40°C ~ 80°C

Mongobo oa polokelo: 5% ~ 95% (ha ho condensation)

Litlhaloso

Kopo

Tharollo e tloaelehileng 1

Tharollo e tloaelehileng 2