Moetsi oa E1 To Fiber Interface Converter - 16E1+4FE(Ho itšehla thajana) JHA-CPE16WF4 PDH Fiber Multiplexer – JHA

16E1+4FE(Ho itšehla thajana)JHA-CPE16WF4

PDH Fiber Multiplexer

Kakaretso

Letoto lena la lisebelisoa ke k'hamphani e ntlafalitseng PDH fiber transmission e inehetseng ea VLSI e ntlafalitsoeng motheong oa lisebelisoa tsa optical transmission. Fana ka li-interfaces tsa 1-16 E1, sehokelo sa mantlha le se bolokang fiber optical interface, 1-4 ea ho itšehla thajana ea 10/100M Fast Ethernet segokanyimmediamentsi sa sebolokigolo (sesebediswa se ikemetseng sa terata e mene 100M, kakaretso ya bandwidth ke 4 * 100M), hammoho le segokanyimmediamentsi sa ho atolosa khoebo tse peli. 2 Sesebelisoa se atolositsoeng sa lits'ebeletso se ka sebelisoa joalo ka data ea RS232 / RS485 / RS422 asynchronous, ts'ebeliso e bonolo haholo. Khetho ea mohala oa tšebeletso ea dijithale e le 'ngoe, ts'ebeliso e bonolo haholo. Ka ts'ebetso ea alamo ea molumo, ts'ebeliso eohle e tsitsitseng, e ka tšeptjoang, e tlaase ea matla, ho kopanya ho phahameng, boholo bo nyane.

Setšoantšo sa Sehlahisoa

Likaroloana

• E ipapisitse le boikemelo ba IC
• 1-4 ho itšehla thajana 10/100M Sehokelo sa Ethernet se potlakileng, lebelo le leng le le leng la FE Ethernet le ikemetseng ke 100M, kakaretso ea bandwidth ke 4 * 100M;
• Fana ka sebopeho sa taolo ea Console (RS232)
• Fana ka likhokahano tse peli tsa fiber 1 + 1 sireletsa（APS）tshebetso
• Sekhahla sa Ethernet interface ke 10/100M, halofo / e felletseng duplex Auto-Nego
• Sephutheloana sa Ethernet se tšehetsa liforeimi tsa jumbo, ho fihla ho 10240 byte
• Khokahano ea E1 e lumellana le G.703, e amohela mokhoa oa ho hlaphoheloa oa oache ea dijithale le theknoloji e notlelang mohato o bonolo
• E sebelisa mohala o tloahelehileng oa 2 (lithupa tseo e seng tsa mohala) tse behiloeng joalo ka mohala oa odara oa boenjiniere(ho ikhethela)
• Ha lets'oao la optical le lahleheloa ke, le ka bona hore sesebelisoa se hole se koetsoe kapa faeba e khaotsoe, 'me e bontša alamo ka LED.
• Sesebelisoa sa lehae se ka sheba boemo bo sebetsang ba sesebelisoa se hole
• Fana ka taelo ea sebopeho se hole Loop Back, ts'ehetsa ts'ebetso ea E1 Loop Back ea lehae, ts'ehetsa E1 LOS le alamo ea AIS, nolofatsa tlhokomelo ea mohala.
• Sebaka sa phetisetso se fihla ho 2-100Km ntle le tšitiso
• Ts'ehetso ea mookameli oa SNMP (moemeli oa SNMP ka hare)
• AC 220V, DC-48V, DC24V e ka ba khetho
• DC-48V/DC24V mosebetsi oa ho lemoha polarity ea phepelo ea motlakase, Mahala Polarity

Mekhahlelo

♦Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Boholo ba sebaka sa phetisetso: 5Km @ 62.5 / 125um fiber e le 'ngoe ea mode, attenuation (3dbm/km)

Bolelele ba Leqhubu: 820nm

Matla a ho fetisa: -12dBm (Min) ~-9dBm (Max)

Kutloisiso ea moamoheli: -28dBm (Mots)

Tekanyetso ea khokahano: 16dBm

Fiber ea mofuta o le mong

8/125um, 9/125um

Bolelele ba phetisetso e kholo: 40Km

Sebaka sa phetisetso: 40Km @ 9 / 125um fiber e le 'ngoe ea mode, attenuation (0.35dbm/km)

Bolelele ba maqhubu: 1310nm

Matla a ho fetisa: -9dBm (Min) ~-8dBm (Max)

Kutloisiso ea moamoheli: -27dBm (Min)

Tekanyetso ea khokahano: 18dBm

♦E1 Interface

Interface Standard: lumellana le protocol G.703;
Sekhahla sa Sehokelo: 2048Kbps ± 50ppm;
Khoutu ea Sehokelo: HDB3;

Tšitiso ea E1: 75Ω (ho se leka-lekane), 120Ω (ho leka-lekana);

Jitter tolerance: Ho latela protocol G.742 le G.823

Tlhokomelo e lumelletsoeng: 0 ~ 6dBm

♦Khokahano ea Ethernet (10/100M)

Sekhahla sa khokahano: 10/100 Mbps, halofo / e felletseng ea duplex ea lipuisano

Interface Standard: E lumellana le IEEE 802.3, IEEE 802.1Q (VLAN)

Bokhoni ba Aterese ea MAC: 4096

Sehokelo: RJ45, tšehetsa Auto-MDIX

♦Tikoloho ya mosebetsi

Mocheso o sebetsang: -10°C ~ 50°C

Mongobo o sebetsang: 5% ~ 95% (ha ho condensation)

Mocheso oa polokelo: -40°C ~ 80°C

Mongobo oa polokelo: 5% ~ 95% (ha ho condensation)

Litlhaloso

Kopo