Feme ea OEM bakeng sa Dual Fiber 10/100m - 4E1+4GE PDH Fiber Multiplexer JHA-CP48G4 - JHA

4E1+4GE PDHFiberMultiplexer

Kakaretso

Sesebelisoa sena ke sesebelisoa sa ho fetisetsa optical point-to-point se entsoeng motheong oa VLSI. Sesebelisoa se fana ka sebopeho sa 1-4 * E1, 1-4 * 10/100 / 1000M Ethernet interface (Wire Speed ​​1000M) le li-interface tsa 2 tsa ho atolosa. 4 * Ethernet interface ke switch interface, e ka tšehetsa VLAN. 1 segokanyimmediamentsi sa sebolokigolo ka sebelisoa e le mocha phetiso ya RS232/RS485/RS422 asynchronous data, omileng letshwao la ho ikopanya, 1Channel ditsitithale fono ya kgwebo ka ba boikhethelo. E tenyetseha haholo. E na le ts'ebetso ea alamo. Mosebetsi o ka tšeptjoa, o tsitsitse, 'me o sebelisa matla a fokolang, ho kopanya ho phahameng, boholo bo fokolang.

Setšoantšo sa Sehlahisoa

Likaroloana

• E ipapisitse le IC ea boinotšing
• Fiber bandwidth e fihla ho 1.5G, Ethernet bandwidth ke Wire Speed ​​1000M
• Sekhahla sa Ethernet interface ke 10/100/1000M, halofo / e felletseng duplex Auto-Nego
• 4 * Ethernet segokanyimmediamentsi sa sebolokigolo, tshehetso VLAN, ka beha ho 4 kanale karohano e utloahalang
• Fana ka sebopeho sa taolo ea Console (RS232)
• Fana ka likhokahano tse peli tsa fiber 1 + 1 sireletsa (APS) ts'ebetso
• Khokahano ea E1 e lumellana le G.703, e amohela mokhoa oa ho hlaphoheloa oa oache ea dijithale le theknoloji e notlelang mohato o bonolo
• E sebelisa mohala o tloahelehileng oa 2 (lithupa tseo e seng tsa mohala) tse behiloeng joalo ka mohala oa odara oa boenjiniere(ho ikhethela)
• Ha lets'oao la optical le lahleheloa ke, le ka bona hore sesebelisoa se hole se koetsoe kapa faeba e khaotsoe, 'me e bontša alamo ka LED.
• Sesebelisoa sa lehae se ka sheba boemo bo sebetsang ba sesebelisoa se hole
• Fana ka 2 segokanyimmediamentsi sa sebolokigolo, o ka atolosa 1 ~ 2Channel asynchronous data, tse kang RS232/RS485/RS422/Manchester khoutu;
• Fana ka taelo ea sebopeho se hole Loop Back, ts'ehetsa ts'ebetso ea E1 Loop Back ea lehae, ts'ehetsa E1 LOS le alamo ea AIS, nolofatsa tlhokomelo ea mohala.
• Sebaka sa phetisetso se fihla ho 2-100Km ntle le tšitiso
• Ts'ehetso ea mookameli oa SNMP (moemeli oa SNMP ka hare)
• AC 220V, DC-48V, DC24V e ka ba khetho
• DC-48V/DC24V mosebetsi oa ho lemoha polarity ea phepelo ea motlakase, Mahala Polarity

Mekhahlelo

♦Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Boholo ba sebaka sa phetisetso: 5Km @ 62.5 / 125um fiber e le 'ngoe ea mode, attenuation (3dbm/km)

Bolelele ba Leqhubu: 820nm

Matla a ho fetisa: -12dBm (Min) ~-9dBm (Max)

Kutloisiso ea moamoheli: -28dBm (Mots)

Tekanyetso ea khokahano: 16dBm

Fiber ea mofuta o le mong

8/125um, 9/125um

Bolelele ba phetisetso e kholo: 40Km

Sebaka sa phetisetso: 40Km @ 9 / 125um fiber e le 'ngoe ea mode, attenuation (0.35dbm/km)

Bolelele ba maqhubu: 1310nm

Matla a ho fetisa: -9dBm (Min) ~-8dBm (Max)

Kutloisiso ea moamoheli: -27dBm (Min)

Tekanyetso ea khokahano: 18dBm

♦E1 Interface

Interface Standard: lumellana le protocol G.703;
Sekhahla sa Sehokelo: 2048Kbps ± 50ppm;
Khoutu ea Sehokelo: HDB3;

Tšitiso ea E1: 75Ω (ho se leka-lekane), 120Ω (ho leka-lekana);

Jitter tolerance: Ho latela protocol G.742 le G.823

Tlhokomelo e lumelletsoeng: 0 ~ 6dBm

♦Gigabit Ethernet Interface (10/100/1000M)

Sekhahla sa khokahano: 10/100/1000M, halofo/puisano e felletseng ea duplex

Interface Standard: E lumellana le IEEE 802.3, IEEE 802.1Q (VLAN)

Bokhoni ba Aterese ea MAC:4096

Sehokelo: RJ45, tšehetsa Auto-MDIX

♦Tikoloho ya mosebetsi

Mocheso o sebetsang: -10°C ~ 50°C

Mongobo o sebetsang: 5% ~ 95% (ha ho condensation)

Mocheso oa polokelo: -40°C ~ 80°C

Mongobo oa polokelo: 5% ~ 95% (ha ho condensation)

Litlhaloso

Kopo