Leave Your Message
Mga Kategorya ng Produkto
Mga Tampok na Produkto
Magandang Kalidad FTTH - 4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, walang Wi-...Magandang Kalidad FTTH - 4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, walang Wi-...
01

Magandang Kalidad FTTH - 4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, walang Wi-...

2016-01-08
Maikling Pananaw Ang serye ng JHA700-E304 ay fiber sa home multi service access EPON ONU. Ito ay batay sa mature, stable, high cost performance na teknolohiyang EPON at may gigabit Ethernet switching, WDM at HFC na teknolohiya. Ang serye ng JHA700-E304 ay may mas mataas na bandwidth, mas mataas na pagiging maaasahan, madaling pamamahala at magandang kalidad ng serbisyo (QoS) na garantiya na may teknikal na pagganap ng kagamitan na nakakatugon sa mga kinakailangan ng IEEE802.3ah at may mahusay na pagkakatugma sa mga third party na tagagawa ng OLT. Ang teknolohiya ng EPON ay isang uri ng umuusbong na teknolohiya na sinasamantala ang teknolohiya ng PON at ang teknolohiya ng Ethernet ay isa ring uri ng teknolohiya ng point to multi-point network. OLT sa pamamagitan ng passive optical network upang ikonekta ang maramihang ONU na may solong hibla bidirectional teknikal ay maaaring bihirang gumamit ng mga mapagkukunan ng hibla upang matugunan ang mga operator ng multi-user na kinakailangan sa pag-access. Gumagamit ito ng single fiber WDM na teknolohiya na may downlink wavelength 1550nm at 1490nm, uplink wavelength 1310nm. Kailangan lang nito ng one-core fiber upang magpadala ng data at serbisyo ng CATV. Functional Feature ♦ Suportahan ang port-based na limitasyon sa rate at kontrol ng bandwidth; ♦ Alinsunod sa IEEE802.3ah Standard ♦ Hanggang 20KM transmission Distansya ♦ Suportahan ang data encryption, group broadcasting, port Vlan separation, atbp. ♦ Suportahan ang Dynamic Bandwidth Allocation (DBA) ♦ Suportahan ang ONU auto-discovery/Link detection/remote upgrade ng software; ♦ Suportahan ang port mode ng VLAN configuration ♦ Suportahan ang power-off alarm function , madali para sa pag-detect ng problema sa link ♦ Suportahan ang broadcasting storm resistance function ♦ Suportahan ang port isolation sa pagitan ng iba't ibang port ♦ Suportahan ang port flow control ♦ Suportahan ang ACL upang i-configure ang data packet filter nang may kakayahang umangkop ♦ Espesyal na disenyo para sa pag-iwas sa pagkasira ng system upang mapanatili ang matatag na sistema ♦ Suportahan ang software online na pag-upgrade ♦ EMS network management batay sa SNMP ,maginhawa para sa pagpapanatili Interface ng produkto at mga kahulugan ng LED Paglalarawan ng Indicator 1 PWR Power status Naka-on: Ang ONU ay naka-onNaka-on: Ang ONU ay naka-off 2 CATV na katayuan ng CATV Naka-on:CATV optical normalOff:Ang mga signal ng CATV ay hindi natatanggap 3 LAN1- 4 LAN port status On: Ethernet connection is normalBlinking: Data is being transmitted through the Ethernet portOff: Ethernet connection is not set up 4 LOS EPON optical signals On: Optical power na mas mababa kaysa sa sensitivity ng receiver ;Off: Optical sa normal 5 PON ONU Register On: Tagumpay na magparehistro sa OLTBlinking: Sa proseso ng pagrehistro sa OLTOff: Nabigong magrehistro sa OLT; Pagtutukoy Item Parameter PON Interface 1 EPON optical interface Matugunan ang 1000BASE-PX20+ standard Symmetric 1.25Gbps upstream/downstream SC/APC single-mode fiber split ratio: 1:64 Distansya ng transmission 20KM User Ethernet Interface 4*10/100M o 4*10/100 /1000M o 1*10/100/1000M at 3*10/100/1000M auto-negotiationFull/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance RF Interface Female F-Type Connector Power Interface 12V DC Power supply PONOpticalParameter Wavelength: Tx 1310nm, Rx Power Optical 0~4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm Data Transmission Parameter PON Throughput: Downstream 980Mbps; Upstream 950Mbps Ethernet: 100Mbps o 1000Mbps Packet Loss Ratio: 45dB Input optical power -18dBm~0dBm RF frequency 47MHz~1000MHz RF output lever 78dBuV (@-12~-2dBm@85MHz) CNR >41dB (@-10dBm@SODS222 Channel) -10dBm@DS22 Channel) CTB >60dBc (@-10dBm@DS22 Channel) RF output return loss >12dB RF impedance 75Ω AGC function Support Network application Typical Solution:FTTH, FTTO Typical Business:INTERNET, CATV Figure: JHA700-E304 (hindi kasama ang wifi) series EPON ONU Application Diagram Impormasyon sa Pag-order Pangalan ng Produkto Mga Paglalarawan ng Modelo ng Produkto 4FE+CATV Single fiber JHA700-E304FA-HR501 4*10/100M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, sumusuporta sa AGC function, Plastic casing, external power supply adapter 4GE+CATV Single fiber JHA700-E304GA-HR501 4*10/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, suportahan ang AGC function, Plastic casing, external power supply adapter 1GE+3FE+CATV Single fiber JHA700 -E304XA-HR501 3*10/100M at 1*10/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, suporta sa AGC function, Plastic casing, external power supply adapter
Pagtatanong
Detalye
PriceList para sa Rs232 To Rj45 Adapter - Naka-frame na E1-4FE interface Converter JHA-CE1fF4 - JHAPriceList para sa Rs232 To Rj45 Adapter - Naka-frame na E1-4FE interface Converter JHA-CE1fF4 - JHA
01

PriceList para sa Rs232 To Rj45 Adapter - Naka-frame na E1-4FE interface Converter JHA-CE1fF4 - JHA

2016-01-08
Naka-frame na E1-4FE interface Converter JHA-CE1fF4 Pangkalahatang-ideya Ang E1-4ETH interface converter ay batay sa FPGA. Ang aparato ay nagbibigay ng paglipat sa pagitan ng ITU-T G.703 (E1) na karaniwang naka-frame na E1 na interface at 10/100Base-T na interface. Ito ay isang mataas na kakayahan, self-adaptable long-distance Ethernet bridge. Ang produkto ay maliit at mababang halaga. Ito ay malawakang ginagamit sa pagkonekta sa pagitan ng WAN at LAN, pagsubaybay, atbp Mga Tampok na Uri ng Mini ng Larawan ng Produkto Batay sa sariling copyright na sinusuportahan ng IC E1 ang anumang set ng timeslot, ang rate ay 64K-2048K Maaaring mapagtanto ang monitor at kontrol ng mga remote na kagamitan, ginawa ng data ng pamamahala ng OAM hindi kunin ang timeslot ng user at i-save ang E1 bandwidth Magkaroon ng function ng E1 interface loop back check, maiwasan ang converter crashed dahil sa interface loop return; Magkaroon ng indicator kapag naka-off ang device o nasira o nawalan ng signal ang linya ng E1; Maaaring itakda ang E1 na linya na hindi magpadala ng LINK signal sa Ethernet interface habang ang E1 na linya ay sira; Sinusuportahan ng interface ng Ethernet ang mga jumbo frame (1916 Bytes); 4Channel 10M/100M Ethernet interface ay maaaring ihiwalay ang bawat isa upang mapagtanto ang komunikasyon nang nakapag-iisa; Sinusuportahan ng interface ng Ethernet ang 10M/100M, kalahati/buong duplex na auto-Negotiation at AUTO-MDIX (crossed line at straightly connected line self-adaptable ); Magbigay ng 2 uri ng orasan: E1 master clock at E1 line clock; Magkaroon ng tatlong Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、Command ang remote Ethernet interface Loop Back(REM) Magkaroon ng pseudo random code test function, madali ang pag-install at pagpapanatili; Magbigay ng 2 impedances: 75 Ohm unbalance at 120 Ohm balance; Magkaroon ng Ethernet monitor self-reset function, ang kagamitan ay hindi patay Ethernet interface ay sumusuporta sa mga counter ng pagtanggap at pagpapadala ng frame, tumatanggap ng maling frame counters.E1 interface ay sumusuporta sa mga counter ng pagtanggap ng maling frame; Napagtanto monitor ng remote na kagamitan temperatura at boltahe mula sa lokal na kagamitan; Suportahan ang SNMP Network Management; Maaaring bumuo ng istraktura: Ethernet E1 Bridge(A)---E1 Optical Fiber Modem(B)---Ethernet Optical Fiber Modem (C) Parameter ♦ E1 Interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: n*64Kbps±50ppm; Code ng Interface: HDB3; E1 Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Ethernet interface(10/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible sa IEEE 802.3 , IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, suporta sa Auto-MDIX ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50°C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: -40°C ~ 80°C Storage Humidity: 5 %~95 % (walang condensation) Mga Detalye Numero ng Modelo: JHA-CE1fF4 Functional na Paglalarawan 1channel naka-frame na E1 - 4FE interface converter ,Na may E1 loopback detection function Port Deskripsyon Isang E1 interface; 4*FE Interface Power supply: AC180V ~ 260V; DC –48V; DC +24VPower consumption: ≤10W Dimensyon Sukat ng Produkto: 216X140XD31Hmm 1.1KG Application
Pagtatanong
Detalye
Napakababang Presyo Rs422 Multiplexer - 4E1-1FE interface Converter JHA-CE4F1 - JHANapakababang Presyo Rs422 Multiplexer - 4E1-1FE interface Converter JHA-CE4F1 - JHA
01

Napakababang Presyo Rs422 Multiplexer - 4E1-1FE interface Converter JHA-CE4F1 - JHA

2016-01-08
4E1-1FE interface Converter JHA-CE4F1 Pangkalahatang-ideya Ang interface converter na ito ay batay sa FPGA, gamit ang reverse direction multiplexing technology para i-bundle para sa maramihang E1 circuits upang maihatid ang Ethernet data ng 4Channel 100BASE-TX. Maaari itong mapagtanto 1~4 E1 channel upang i-convert sa pagitan ng Ethernet optical interface. Ang device na ito ay maaaring magpadala ng transceiver signal point upang tumuro sa Ethernet optical interface upang gawing interconnected ang mga E1 channel sa Ethernet optical interface. Hindi tulad ng pangkalahatang remote network bridge, ang device na ito ay maaaring suportahan ang 1-4Channel E1 channel configuration, maaaring awtomatikong makita ang bilang ng E1 at piliin ang E1 na magagamit. Pinapayagan nito ang E1 na mga linya ng paghahatid ng pagkakaiba sa oras ng pagkaantala. Larawan ng Produkto Mini Type 19 Inch 1U Type Features Batay sa self-copyright IC Upang makamit ang Ethernet data transparent transmission sa 1-4E1 circuits Maaaring mapagtanto ang lokal at ang remote na device reset Ethernet Interface ay 100BASE-FX, suportahan ang VLAN protocol Inter-set dynamic Ethernet MAC address (4,096) na may lokal na data frame filtering function na Single Channel lines rate ay 1984Kbit/s, 4Channel Bandwidth ay hanggang sa 7936Kbit/s Suporta sa lahat ng hanay ng Ethernet Work Mode CRC awtomatikong alarm threshold ay maaaring itakda upang ihiwalay ang mahinang kalidad na mga linya ng transmission at putulin ang isang solong direksyon. Kapag ang 2M branch circuit ng isang direksyon na error rate ay lumampas sa threshold, pagputol sa direksyon na ito ang ibang direksyon ay hindi apektado; ibig sabihin, ang parehong Ethernet direksyon transmission ay maaaring walang simetrya. Kapag lumampas ang margin sa pinapayagang hanay, maaaring awtomatikong huminto ang system sa E1 na masyadong malaki ang pagkaantala ng oras upang magpadala ng data E1 interface na umaayon sa ITU-T G.703, G.704 at G.823, hindi sumusuporta sa paggamit ng signal timeslot E1 interface module na may inter-set clock recovery circuit at HDB3 code circuit Suportahan ang E1 channel na hot-plug sa device, at awtomatikong nade-detect ang epektibong channel at hindi makakaabala sa paghahatid ng data Maaaring suportahan ang 1-4Channel E1 pagsasaayos ng channel, maaaring awtomatikong makita ang bilang ng E1 at piliin ang magagamit na E1; Mga Parameter ♦ E1 Interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: n*64Kbps±50ppm; Code ng Interface: HDB3; E1 Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Ethernet interface(100/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible sa IEEE 802. , IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, suporta sa Auto-MDIX ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50°C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: -40°C ~ 80°C Storage Humidity: 5 %~95 % (walang condensation) Mga Detalye Numero ng Modelo ng Modelo: JHA-CE4F1 Functional na Paglalarawan 4E1/1FE interface Converter Port Paglalarawan 4* E1 interface;1 *FE interface Power supply: AC180V ~ 260V;DC –48V;DC +24V;AC110VPower consumption: ≤10W Dimensyon Laki ng Produkto: 216X140X31mm (WXDXH3 KG Weight Application Application solusyon 1 Karaniwang solusyon 2
Pagtatanong
Detalye
Magandang Kalidad Industrial Ethernet Switch - 4 10/100/1000TX at 1 1000X SFP Slot | Hindi Pinamamahalaang Industrial Ethernet Switch...Magandang Kalidad Industrial Ethernet Switch - 4 10/100/1000TX at 1 1000X SFP Slot | Hindi Pinamamahalaang Industrial Ethernet Switch...
01

Magandang Kalidad Industrial Ethernet Switch - 4 10/100/1000TX at 1 1000X SFP Slot | Hindi Pinamamahalaang Industrial Ethernet Switch...

2016-01-08
Mga Tampok ♦ Suportahan ang 1 1000Base-X SFP slot at 4 10/100/1000Base-T(X) Ethernet port. ♦ Suportahan ang IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Plug-and-play, 10/100/1000Base-T(X), full/half duplex, MDI/MDI-X auto-adaptation. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC10-58V redundancy power, reverse polarity protection. ♦ Industrial grade 4 na disenyo, -40-85°C operating temperature. ♦ IP40 rated aluminum alloy housing, DIN-Rail mounted. Panimula Ang JHA-IGS14 ay isang plug-and-play na hindi pinamamahalaang pang-industriya na Ethernet switch, na maaaring magbigay ng matipid na solusyon para sa iyong Ethernet. Ang dust-proof na fully sealed structure (IP40 protection grade), over-current, over-voltage at EMC protected, redundant double power input pati na rin ang built-in na intelligent na disenyo ng alarm ay makakatulong sa system main tenancy personnel na subaybayan ang operasyon ng network, na maaaring magtrabaho nang mapagkakatiwalaan sa malupit at mapanganib na kapaligiran. Sinusuportahan ng JHA-IGS14 ang 1 1000Base-X SFP slot at 4 na 10/100/1000Base-T(X) Ethernet port. Sinusuportahan nito ang CE, FCC, RoHS standard, masungit na high-strength metal case, power input (DC10-58V). Sinusuportahan ng switch ang IEEE802.3, IEEE802.3u, IEEE802.3x na may 10/100/1000Base-T(X), full/half-duplex, at MDI/MDI-X auto-adaptation, ang -40-85℃ operating temperature maaaring matugunan ang lahat ng uri ng pangangailangan sa kapaligirang pang-industriya, na nagbibigay ng maaasahan at pang-ekonomiyang solusyon para sa iyong pang-industriyang Ethernet network. Pagtutukoy Protocol Standard IEEE802.3, IEEE802.3u, IEEE802.3x Flow Control IEEE802.3x flow control, back press flow control Switching Performance Forwarding Rate: 7.44MppsTransmission Mode: Store at ForwardPacket Buffer Size: 1MBackplane Bandwidth:8 Laki ng MACK Table10Gbps: Oras ng Pagkaantala: 100,000 Oras Warranty 5-taon Dimension Order Information Model No. Paglalarawan ng Mga Kalakal JHA-IGS14 Unmanaged Industrial Ethernet Switch, 1 1000Base-X SFP Slot at 4 10/100/1000Base-T(X), DIN-Rail, DC10-58V, -40-85°C Operating Temperature JHA-IG14 Unmanaged Industrial Ethernet Switch, 1 1000Base-FX at 4 10/100/1000Base-T(X ), SC Connector, Multimode, Dual Fiber, 550m, DIN-Rail, DC10-58V, -40-85°C Operating Temperature JHA-IG14-20 Unmanaged Industrial Ethernet Switch, 1 1000Base-FX at 4 10/100/1000Base-T(X), SC Connector, Single Mode, Dual Fiber, 20Km, DIN-Rail, DC10-58V, -40-85°C Operating Temperature JHA-IG14W-20 Unmanaged Industrial Ethernet Switch, 1 1000Base-FX at 4 10/100/1000Base-T(X), SC Connector, Single Mode, Single Fiber, 20Km, DIN-Rail, DC10-58V, -40-85 °C Operating Temperature Fiber Connector: SC/ST/FC/LC(SFP Slot), Single Mode/Multimode, Dual Fiber/Single Fiber, 550m/2Km/20Km/40Km/60Km/80Km/100Km/120Km ay Opsyonal. Ang Power Supply: DC24V DIN-Rail Power Supply o Power Adapter ay Opsyonal.
Pagtatanong
Detalye
Magandang Kalidad ng Fiber Media Converter - 16 na Puwang 2U 19″ Rack Mount Chassis JHA-E16 - JHAMagandang Kalidad ng Fiber Media Converter - 16 na Puwang 2U 19″ Rack Mount Chassis JHA-E16 - JHA
01

Magandang Kalidad ng Fiber Media Converter - 16 na Puwang 2U 19″ Rack Mount Chassis JHA-E16 - JHA

2016-01-08
16 Slots 2U 19" Rack Mount Chassis para sa Card-Type Media Converter Panimula Ang JHA-E16 ay isang 16-slot 19" Rack-Mount Chassis System na nagbibigay ng pabahay para sa hanggang 16 JHA series media converter. Dinisenyo para sa tuluy-tuloy na operasyon, ang chassis ay nilagyan ng dalawahang cooling fan at redundant power supply (opsyonal). Ang mga feature na Plug-and-Play at Hot-Swap nito ay nagbibigay-daan sa pag-install/pag-alis ng converter unit nang hindi pinapatay ang chassis. Tinatanggal ng JHA-E16 rack-mount chassis ang mga external power adapter para sa mga JHA series media converter at nag-aayos ng maraming converter sa isang unit, na ginagawa itong perpektong solusyon para sa pamamahala ng maraming JHA series converter. Mga Tampok ♦ Nagbibigay ng pabahay para sa hanggang 16 JHA series media converter. ♦ Suportahan ang AC220V at DC48V dalawang power supply, na angkop para sa iba't ibang kapaligiran sa trabaho. ♦ Ang bawat module ng card ay hot swappable. ♦ Modular power supply na disenyo, madaling pagpapanatili, mas mahusay na shielding, na pumipigil sa normal na operasyon ng power generated electromagnetic signal interference module group. ♦ Maaaring i-install ang karaniwang chassis sa rack ng silid ng makina, madaling pangasiwaan. ♦ Sabay-sabay na ipinasok ang 16 na fiber optic transceiver, ang bawat isa sa transceiver module ay maaaring magkaiba ng mga rate. ♦ Proteksyon sa kuryente: Proteksyon sa sobrang boltahe, proteksyon sa overcurrent, proteksyon ng short circuit. ♦ All-aluminum na disenyo, sopistikadong hitsura, magandang bentilasyon magaan ang thermal na disenyo upang matiyak ang normal at matatag na operasyon ng system. Pagtutukoy ng Dimensyon Mga Puwang na Ibinigay 16 Istraktura ng Mga Puwang 2 U Rack mounted Power Input AC 85~265V 50/60Hz Power Output DC 5V 16A Power Configuration Redundant Power Supply LED Indication Power Max Power Consumption 95W Operating Temperature -20~70℃ Working Humidity 5%~90℃ % Temperatura ng Imbakan -40~70℃ Halumigmig sa Imbakan 5% hanggang 90% Di-Condensing na Mga Dimensyon 485*293*90mm(L*W*H) Certification CE, FCC, RoHS Warranty 3-taong Order Information Model No. Paglalarawan ng Goods JHA-E16-2A 16 Slots 2U Rack Mount Chassis para sa Card-Type Media Converter, Dual Power, AC110-240V JHA-E16-2D 16 Mga Puwang ng 2U Rack Mount Chassis para sa Card-Type Media Converter, Dual Power, DC48V
Pagtatanong
Detalye
Chinese Professional 16 E1 To 4 Port Fast Ethernet Interface Converter - V Serial Interface Converter E1 To RS530 Se...Chinese Professional 16 E1 To 4 Port Fast Ethernet Interface Converter - V Serial Interface Converter E1 To RS530 Se...
01

Chinese Professional 16 E1 To 4 Port Fast Ethernet Interface Converter - V Serial Interface Converter E1 To RS530 Se...

2016-01-08
Naka-frame na E1-RS530 interface Converter JHA-CE1fR530 Pangkalahatang-ideya Ang protocol converter na ito ay nagbibigay ng E1 interface at ang RS530 interface ay nagbibigay-daan sa pag-frame ng E1 hanggang RS530 na interface ng conversion sa pagitan ng E1 rate conversion at slot extraction function. Naka-frame na mode, maaaring kunin ng user ang E1 time slot n * 64K (n≤31) channel ng data; unframed mode, magagamit ng user ang data channel rate na 2.048Mbps. Built-loop test equipment na mga kakayahan upang mapadali ang pagbubukas at mga gawaing regular na pagpapanatili. Mga Tampok ng Uri ng Mini na Larawan ng Produkto Batay sa self-copyright IC Maaari mong makilala kapag ang isang namamatay na hingal o masira kapag nawala ang E1 E1 transmission intermediate signal Habang sinusuportahan ang adaptive 120Ω / balanse at 75Ω / Imbalance impedance, hindi na kailangang gumawa ng mga setting ng System sa pamamagitan ng mahigpit na pagsubok at praktikal na pag-verify, ganap na sumusunod sa EIA-530, ITU-T G.703, G.704 at iba pang rekomendasyon; Nagbibigay ito ng tatlong loopback function: E1 local loopback (ANA), RS530 loopback (DIG), order remote RS530 loopback (REM); Pseudo-random code test function, lalo na upang mapadali ang pagbubukas ng linya, kapag ang isa ay maaaring magkaroon ng 2M BERT DTE o DCE equipment support at interconnection; Sinusuportahan ng interface ng RS530 ang hot swap. Sinusuportahan ng trabaho ng RS530 na orasan ang panloob na orasan, panlabas na orasan at orasan ng linya; Opsyonal AC 220V, DC -48V, DC + 24V, DC power supply walang positibo at negatibong puntos Mga Parameter ♦ RS530 Interface Interface Rate: 2048Kbps Interface character: tumugma sa EIA-530 Connector: DB25 lalaki/babae (opsyonal). Uri ng interface: DCE Clock: G.703 resume clock, internal /RS530 external clock. ♦ E1 interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: n*64Kbps±50ppm; Code ng Interface: HDB3; Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50°C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: - 40°C ~ 80°C Humidity ng Storage: 5%~95 % (walang condensation) Mga Detalye Numero ng Modelo: JHA-CE1fR530 Functional na Paglalarawan na naka-frame na E1-RS530 (EIA-530) sa pagitan ng interface Converter Port Paglalarawan Isang E1 interface, Isang RS530 interface Power Power supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10WDimensionLaki ng Produkto: 216X140X31mm (WXDXH)Timbang1.8KG Application Karaniwang solusyon 1 Karaniwang solusyon 2
Pagtatanong
Detalye
Magandang Kalidad ng Pdh-Sdh Multiplexer - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 - JHAMagandang Kalidad ng Pdh-Sdh Multiplexer - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 - JHA
01

Magandang Kalidad ng Pdh-Sdh Multiplexer - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 - JHA

2016-01-08
8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 Pangkalahatang-ideya Ang device na ito ay ang point-to-point optical transmission device na binuo batay sa VLSI. Nagbibigay ang device ng 1-8*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed ​​1000M) at 2 expansion interface. 4 * Ethernet interface ay switch interface, maaaring suportahan ang VLAN. Maaaring gamitin ang 1 expansion interface bilang transmission channel ng RS232/RS485/RS422 asynchronous na data, dry contact signal, 1Channel digital business phone ay maaaring opsyonal. Ito ay napaka-flexible. Mayroon itong alarm function. Ang trabaho ay maaasahan, matatag, at mababang paggamit ng kuryente, mataas na pagsasama, maliit na sukat. Mga Tampok ng Larawan ng Produkto Batay sa self-copyright IC Ang Fiber bandwidth ay hanggang 1.5G, ang Ethernet bandwidth ay Wire Speed ​​1000M Ethernet interface rate ay 10/100/1000M, half/full duplex Auto-Nego 4*Ethernet interface ay switch interface, suporta VLAN, maaaring itakda sa 4 channel logical isolation Magbigay ng Console na pamahalaan ang interface (RS232) Magbigay ng dalawang fiber interface 1+1 protect(APS)function E1 interface ay sumusunod sa G.703, gumagamit ng digital clock recovery at makinis na phase-lock na teknolohiya Gumagamit ng karaniwang 2 wire na telepono (mga non-telephone handle) na itinakda bilang engineering order-wire hotline(opsyonal) Kapag nawalan ng signal ang optical, ito maaaring makita ang remote na aparato ay naka-off o ang fiber ay nakadiskonekta, at nagpapahiwatig ng alarma sa pamamagitan ng LED Ang lokal na aparato ay maaaring tingnan ang remote na aparato na gumaganang kondisyon Magbigay ng 2 expansion interface, maaari mong pahabain ang 1~2Channel asynchronous na data, tulad ng RS232/RS485/RS422/Manchester code; Magbigay ng utos sa remote na interface Loop Back, suportahan ang lokal na E1 Loop Back function, suportahan ang E1 LOS at AIS alarma, pinapadali ang pagpapanatili ng linya Ang distansya ng transmission ay hanggang 2-100Km nang walang pagkaantala Suportahan ang SNMP manager (SNMP agent sa loob) AC 220V, DC-48V , Ang DC24V ay maaaring opsyonal na DC-48V/DC24V power supply polarity detection function, Polarity-Free Parameter ♦ Fiber Multi-mode Fiber 50/125um, 62.5/125um, Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km) Haba ng Wave: 820nm Transmitting power: -12dBm (Min) ~-9dBm (Max) sensitivity: -28dBm (Min) Link badyet: 16dBm Single-mode Fiber 8/125um, 9/125um Maximum transmission distance: 40Km Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) Wave Length: 1310nm Transmitting power: -9dBm ~-8dBm (Max) Receiver sensitivity: -27dBm (Min) Link budget: 18dBm ♦ E1 Interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: 2048Kbps±50ppm; Code ng Interface: HDB3; E1 Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Gigabit Ethernet Interface (10/100/1000M) Interface rate: 10/100/1000M, half/full duplex auto-negotiation Interface Standard: Tugma sa IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability:4096 Connector: RJ45, suporta sa Auto-MDIX ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50°C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: -40° C ~ 80°C Storage Humidity: 5%~95 % (walang condensation) Mga Detalye ng Modelo ng Modelo Numero:JHA-CPE8G4 Functional na Paglalarawan 8E1+4GE PDH,order wire phone,19''inch 1U,(Standard telephone interface, non-telephone handles)Console,1+1 Back up Optic fiber Port Paglalarawan Isang optical port, 8*E1 mga interface (75/120 ohms), 4*GE interface,1*RS232 Console interface,1*SNMP Ethernet interface, isa engineering order-wire na interface ng telepono Power Supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10W Dimensyon Laki ng Produkto: 19 pulgada 1U 483X138X45mm(WXDXH) Timbang 3KG Application
Pagtatanong
Detalye
2019 China New Design Transmitter At Receiver - 2 10/100TX – 1 100FX | Fiber Media Converter JHA-F12 - JHA2019 China New Design Transmitter At Receiver - 2 10/100TX – 1 100FX | Fiber Media Converter JHA-F12 - JHA
01

2019 China New Design Transmitter At Receiver - 2 10/100TX – 1 100FX | Fiber Media Converter JHA-F12 - JHA

2016-01-08
3-port Fiber Media Converter, 1-port 100Base-FX at 2-port 10/100Base-T(X) Panimula Ang JHA-F12 series fiber media converter ay sumusunod sa mga pamantayan ng IEEE802.3, Ito ay dinisenyo upang i-convert ang signal ng data sa pagitan ng 100Base- FX at 10/100Base-TX mabilis na Ethernet. Ang media converter ay konektado sa pagitan ng fiber cable at twisted cable, palawigin ang iyong Ethernet network na lampas sa 100-meter na limitasyon na ipinataw ng copper cable. Ang modelong ito ng converter ay maaaring gamitin bilang slide-in module sa 14-slot 19" Rack-Mount Chassis. Ang converter ay transparent sa lahat ng protocol, maaaring gamitin sa lahat ng lugar bilang Fiber to The Home, Fiber to the Business o Fiber to The Mga Tampok ♦ Pagsunod sa IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 100Base-FX na mga pamantayan ♦ Sinusuportahan nito ang TCP / IP, PPPOE, DHCP, ICMP, NAT na protocol ♦ Flow control: Full duplex gamit ang IEEE 802.3X, isang standard na half-duplex. . ♦ Sinusuportahan ng mga electric port ang function ng auto-negotiation, awtomatikong inaayos ang mga rate ng paghahatid at paglipat ♦ Sinusuportahan ng mga port ang Auto-MDI / MDIX na auto-flip ♦ Suporta sa store at forward mode ♦ Sinusuportahan ang 10M, 100M mode o adaptive mode ). board na may hiwalay na disenyo ng power supply, madaling i-post-maintenance. ♦ Ang mataas na kalidad na integrated photovoltaic module ay nagbibigay ng magandang optical properties at electrical properties upang matiyak ang maaasahang transmission, mahabang buhay. ♦ Operating Mechanism broadcast filtering, address auto-learning at auto-update feature at store at forward. ♦ Sinusuportahan nito ang hanggang 1916 byte long data packet transmission. ♦ Nawawalang link upang magbigay ng mga malayuang diagnostic, electrical interface at optical port link link na diagnostic na koneksyon, dynamic na paghahatid ng data, full-duplex / half duplex, bilis ng ilaw, madaling pag-install at pagpapanatili sa ibang pagkakataon. ♦ Ultra-low power consumption na mas mababa sa 2.5W (Input: AC110 ~ 260V), mahinang init, matatag na operasyon sa mahabang panahon. Pamantayan ng Protokol ng Pagtutukoy ng Dimensyon IEEE802.3, IEEE802.3u, IEEE802.3x Flow control, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/15500 Transmission Distance Single/Dual-fiber 2Km Single Mode, Single-fiber 20/40/60/80/100Km Single Mode, Dual-fiber 20/40/60/80/100/120Km Ethernet Port 10/100M RJ45 Ports, Connection STP / UTP Cat5/Cat5e Cooper Cable Fiber Port Multimode, Dual-fiber SC/ST/FC (Diameter 50/125, 62.5 / 125μm) Single Mode, Single Fiber, SC/ST/FC (Diameter 9/125μm ) Single Mode, Dual-fiber SC/FC (diameter 9/125μm ) Paraan ng Conversion ng Katangian ng Palitan: Media conversion, store at forward / straight sa MAC Add: 1 K Cache: 1 Mbit Full duplex state: flow control, half-duplex: backpressure mode Store at Pasulong: 9.6us, Straight In: 0.9us BER:
Pagtatanong
Detalye
High definition 4 Channel Multiplexer - Modular multi-service Fiber MUX JHA-C2PM-E16 - JHAHigh definition 4 Channel Multiplexer - Modular multi-service Fiber MUX JHA-C2PM-E16 - JHA
01

High definition 4 Channel Multiplexer - Modular multi-service Fiber MUX JHA-C2PM-E16 - JHA

2016-01-08
Pangkalahatang-ideya ng Modular multi-service Fiber MUX JHA-C2PM-E16 Ang device na ito ay modular structure point-to-point optical transmission equipment na may LCD display, gumagamit ng FPGA chips at madaling i-upgrade. Ang Main board ay nagbibigay ng 4*100M channel Ethernet data at 2 AUX port na para sa pagpapadala ng iba pang data gaya ng RS232/RS485/RS422, dalawang optical interface para sa opsyonal na 1+1 auto protection switch (APS). 4 na puwang ng tributary na may mga variant na plug-in module na may kasamang 4xE1 channels module, 4/8/16 x FXO/FXS module at 2x Nx64K V.35 module. Ang maximum capacity ay magiging hanggang 4 na plug-in module na maaaring mga kumbinasyon sa sa itaas ng mga module. Ang mataas na flexibility, performance, ay ang pinakamahusay na solusyon para sa voice/data/video services sa umiiral na market. Mga Tampok ng Uri ng Desktop ng Larawan ng Produkto Nagbibigay ng kabuuang 16 E1 na transparent transmission capacity; May char 16*2 LCD display at SNMP agent sa loob. Magbigay ng Console manage interface(RS232) Magbigay ng isang hotline channel para sa opsyon; Magbigay ng dalawang interface ng fiber ng SFP, ang isa bilang master, ang isa bilang alipin, na nagsisiguro ng walang patid na paghahatid ng serbisyo. Ang rate ng optical port ay 155Mbps, ang saklaw ng paghahatid ay maaaring umabot sa 25KM, 40KM, 60KM, 80KM o 100KM; Magbigay ng dalawang fiber interface 1+1 protect(APS)function ,at ALS(Awtomatikong Laser Shutdown/Reduction) function Magbigay ng 4 na slot na plug-in module: ♦ 4×unFramed E1 module(75Ω)/(120Ω) ♦ E1×Framed module(75Ω)/(120Ω),maaaring itakda ang anumang timesolts ♦ 4×FXO/FXS/EM2-4/Magnet telephone module ♦ 8×FXO/FXS/2 line audio/Magnet telephone module ♦ 16×FXO/FXS/2 line audio/Magnet na module ng telepono ♦ 2×V.35 (2.048M Fixed speed) module ♦ 2×V.35 (N*64K N=1-32) module ♦ 4×RS232/422/485 module ♦ 4*FE to E1 bridge(wire speed 2.048M) module Magbigay ng 4FE(wire speed 100M )Ethernet channel, suporta sa mutual negatiate, Ethernet bandwidth ay nakatakda sa base sa maramihang ng 32K.; Sinusuportahan ng Ethernet port ang full/half duplex, 10M/100M na auto-ataptable; Sinusuportahan ng Ethernet port ang VLAN function at mayroong 4 na devision mode para sa pagpili ng user; Ethernet package size support 1916 byte at 4 Ethernet port ay maaaring itakda nang hiwalay; May kumpletong pag-andar ng alarma at maaaring subaybayan ang katayuan ng malayuang aparato; Sinusuportahan ang E1 loop mula sa remote upang matukoy at mapangasiwaan ang device nang maginhawa; Ang kumbinasyong AC220V at DC-48V para sa mga redundant na Parameter ♦ Fiber Multi-mode Fiber 50/125um, 62.5/125um, Maximum na distansya ng transmission: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km) Haba ng Wave: 82 Transmitting Power: 82 -12dBm (Min) ~-9dBm (Max) Receiver sensitivity: -28dBm (Min) Link budget: 16dBm Single-mode Fiber 8/125um, 9/125um Maximum transmission distance: 40Km Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0. /km) Haba ng alon: 1310nm Power sa pagpapadala: -9dBm (Min) ~-8dBm (Max) Sensitivity ng Receiver: -27dBm (Min) Badyet ng link: 18dBm ♦ E1 Interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: n*64Kbps±50ppm; Code ng Interface: HDB3; E1 Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Ethernet interface(10/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible sa IEEE 802.3 , IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, suportahan ang Auto-MDIX ♦ FXS Phone Interface Ring voltage: 75V Ring frequency: 25HZ Two-line Impedance: 600 Ohm (pick up) Return loss: 40 dB ♦ FXO Switch Interface Ring detection voltage: 35V Ring detection frequency: 17HZ-60HZ Dalawang-linya na Impedance: 600 Ohm (pick up) Nawala ang pagbalik: 40 dB ♦ EM 2/4 Line AD: 0dB DA: -3.5dB Two/Four-line Impedance: 600 Ohm Return loss: 20 dB ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50° C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: -40°C ~ 80°C Storage Humidity: 5%~95 % (walang condensation) Mga Detalye Numero ng Modelo: JHA-C2PM-E16 Functional na Paglalarawan LCD PDH, 4FE,May 4 multifunction slots, may ALS function,Console at SNMP,1+1 Back up Paglalarawan ng Port ng optic fiber 1+1 optical port, 4 na multifunction na slot, 4 na interface ng FE,1*RS232 Console interface,1*SNMP Ethernet interface, isang engineering order-wire na interface ng telepono Power Supply: AC180V ~ 260V;DC –48V;DC +24VPower consumption: ≤10W Dimension Product Size: 216X140X31mm(WXDXH) Timbang 3KG/PCS Application Nagbibigay ang motherboard : 1. LCD display; 2.4-channel wire-speed 100M shared Ethernet channel; 3.2- channel RS232 / 422/485 asynchronous na mga channel; 4.1 channel ng pampublikong telepono 5. SNMP network management 4 slot, sumusuporta sa mixed insertion, magbigay ng: 4 × E1 module (75Ω) / (120Ω) 4 × framing E1 module (75Ω) / (120Ω), maaari kang magtakda ng arbitrary time slot 4 × FXO / FXS / EM2-4 / magnet module 8 × FXO / FXS /2 wire audio / magnet module 16 × FXO / FXS /2 wire audio / magnet module 2 × V.35 (2.048M fixed rate) module 2 × V.35 ( N * 64K N = 1-32) module 4 × RS232 / 422/485 / switch module 4 Ethernet bridge (rate 2.048M) module Tulad ng nasa itaas, kung gusto mong makamit ang 8E1 + 4FE + 32-way na function ng telepono (FXO / FXS), maaari mong i-configure ang dalawang 4E1 card, dalawang 16xFXO / Mga kard ng telepono
Pagtatanong
Detalye
China wholesale Interface Converter Rs485 - Ethernet to E1 Converter E1 to Fiber Ethernet JHA-CE16F4 - JHAChina wholesale Interface Converter Rs485 - Ethernet to E1 Converter E1 to Fiber Ethernet JHA-CE16F4 - JHA
01

Pakyawan ng China Interface Converter Rs485 - Ethernet to E1 Converter E1 to Fiber Ethernet JHA-CE16F4 - JHA

2016-01-08
16E1 hanggang 4FE GFP interface Converter JHA-CE16F4 Pangkalahatang-ideya Ang device na gumagamit ng reverse direction multiplexing technology para i-bundle para sa maramihang E1 circuits upang maihatid ang Ethernet data ng 4Channel 100BASE-TX. Maaari nitong mapagtanto ang conversion sa pagitan ng 1~16 channel E1 at Ethernet optical interface, sa gawing magkakaugnay ang mga E1 channel sa Ethernet optical interface. Gamit ang GFP encapsulation, suportahan ang LCAS (link capacity adjustment scheme) at LAPS protocol. Maaaring suportahan ng device na ito ang configuration ng channel ng 1-16Channel E1, maaaring awtomatikong makita ang bilang ng E1 at piliin ang available na E1. Nagbibigay-daan ito sa oras ng paghahatid ng mga linya ng E1, 1channel/4channel/8channel/16channel na Ethernet bandwidth ay1984Kbit/s, 7936Kbit/s, 15872 Kbit/s,31744Kbit/s. Nagbibigay ang device ng alarm function. Ang trabaho ay maaasahan at mababang paggamit ng kuryente, mataas na pagsasama, maliit na sukat. Support Network management , Ang pangunahing function ng network management system ay upang tuparin ang pagtatanong para sa mga lokal at remote na device at configuration management kabilang ang pagtatanong ng alarm status sa E1 line, Ethernet working status, at loopback control atbp. Product Photo 19inch 1U Features Transparent transmission of Ethernet data sa 1 hanggang 16 E1 na mga circuit; Maaaring nilagyan ng apat na Ethernet switching electrical interface para sa user upang i-save ang isang Ethernet switch; Ethernet 10/100M, full/half duplex fully adaptive, sumusuporta sa VLAN protocol; Sinusuportahan ng bawat port ang suporta sa Ethernet AUTO-MDIX (crossover cable at straight-line adaptation); Ethernet interface ay din opsyonal optical interface upang makamit ang optical Ethernet data transmission sa pamamagitan ng interconnection E1 malayo; 16-channel E1 na mga linya, ang maximum na pagkakaiba sa pagkaantala sa pagitan ng alinmang dalawa ay maaaring umabot ng 220ms; kapag ang pagkakaiba sa pagkaantala ay higit sa 220ms, ang pagkaantala ay magbubunga ng mahinang overrun alarm, habang ang pagkaantala ng negosyo; Built dynamic na Ethernet MAC address list (4096), na may lokal na data frame filtering function; Sumusunod ang E1 interface sa ITU-T G.703, G.704 at G.823, hindi sumusuporta sa paggamit ng mga signaling slot; Timer mode, ang opsyonal na lokal na timing at tracking E1 line timing, E1 line timing source ay maaaring awtomatikong ilipat ayon sa kalidad ng signal. Gaya ng E1 line timing source system para sa unang Road E1, kapag ang unang E1 failure (seryosong babala LOS/AIS/LOF/CRC4 o signal generating loopback) at ang pangalawang path na E1 ay gumagana nang maayos, awtomatikong lilipat ang system sa track Ang pangalawang kalsada E1; pag-aalis ng kasalanan, ang sistema pagkatapos ay awtomatikong bumalik sa track unang kalsada E1; Pagsunod sa ITU-T standard protocol, GFP-F encapsulation suggestion G.7041, VCAT virtual concatenation at LCAS Link Capacity Adjustment recommendation G.7042, Ethernet mapping to nxE1 recommendation G.7043, Ethernet to single E1 map suggestion G. 8040; Kapag tumaas ang transmission bandwidth, hindi makakasira sa data ng Ethernet; Ang bandwidth ng paghahatid ay artipisyal na nabawasan, maaari rin itong maisakatuparan nang hindi nasisira ang network ng data ng Ethernet; Ang mga dulo ng tributary ng E1 ay maaaring hindi tumutugma sa serial connection; Kapag nabigo ang isang solong direksyon ng slip E1, maaari pa ring gumana ang kabilang direksyon; E1 signal loop pabalik at putulin ang awtomatikong detection function: Kapag nakita ang paglitaw ng isang kalsada E1 signal loop, ang sistema ay pinutol ang E1 na ito; loopback na inilabas, E1 awtomatikong pagbawi gamitin ang kalsadang ito; Kumpletuhin ang indikasyon ng alarma, piliin na ipakita ang lokal / remote na alarma; Sinusuportahan ang remote E1 line side loopback function upang mapadali ang pagsubok ng mga linya ng E1; Suportahan ang lokal na system para sa remote system reset; magbigay ng remote interface loopback command, madaling line maintenance; Nagbibigay ang interface ng pamamahala ng console para sa madaling pagbubukas ng pag-install; Module ng pamamahala ng network ng configuration, suportahan ang independiyenteng pamamahala ng network ng SNMP; na may ganitong pagtatapos sa pagtingin sa katayuan sa pagtatrabaho ng remote na pag-andar ng display ng device; Maramihang mga opsyon sa power mode: AC220V, DC-48V / DC24V at mga katulad nito; DC-48V / DC24V power supply na may awtomatikong polarity detection function, kapag naka-install nang walang pagkakaiba sa pagitan ng positibo at negatibo. Mga Parameter ♦ E1 Interface Interface Standard: sumunod sa protocol G.703; Rate ng Interface: n*64Kbps±50ppm; Code ng Interface: HDB3; E1 Impedance: 75Ω (hindi balanse), 120Ω (balanse); Jitter tolerance: Alinsunod sa protocol G.742 at G.823 Allowed Attenuation: 0~6dBm ♦ Ethernet interface(10/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible sa IEEE 802.3 , IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, suporta sa Auto-MDIX ♦ Working environment Temperatura sa pagtatrabaho: -10°C ~ 50°C Working Humidity: 5%~95 % (walang condensation) Temperatura ng storage: -40°C ~ 80°C Storage Humidity: 5 %~95 % (walang condensation) Mga Detalye Numero ng Modelo ng Modelo:JHA-CE16F4 Functional na Paglalarawan 16E1/4*FE Converter, ang Ethernet ay maaaring nahahati sa lohikal na paghihiwalay, Naka-encapsulated sa GFP package, sumusuporta sa LCAS at LAPS protocol, sumusuporta sa independiyenteng SNMP network management; Paglalarawan ng Port 16*E1 interface;4 *FE Interface,isang Console interface,isang SNMP interface Power supply: AC180V ~ 260V;DC –48V;DC +24VPower consumption: ≤10W Dimension Product Size: 19 inch 1U 485X138XD45mm (Weight) 3.0KG Application
Pagtatanong
Detalye
Magandang Kalidad ng SFP Module - 1.25G Single Mode 40Km DDM | Dual Fiber SFP Transceiver JHA3440D - JHAMagandang Kalidad ng SFP Module - 1.25G Single Mode 40Km DDM | Dual Fiber SFP Transceiver JHA3440D - JHA
01

Magandang Kalidad ng SFP Module - 1.25G Single Mode 40Km DDM | Dual Fiber SFP Transceiver JHA3440D - JHA

2016-01-08
Mga Tampok: 1). Hanggang 1.25Gb/s Data Link 2). Hot-Pluggable 3). Duplex LC connector 4). Hanggang 20km sa 9/125μm SMF 5). 1310nm FP laser transmitter 6). Single +3.3V Power Supply 7). Sumusunod ang Interface sa Pagsubaybay sa SFF-8472 8). Mababang power dissipation 2.0V o bukas, naka-enable sa TDIS 1000 V) Electrostatic Discharge (ESD)sa Duplex LC Receptacle IEC 61000-4-2GR-1089-CORE Compatible with standards Electrostatic (Electrostatic Discharge) Bahagi 15 Klase BEN55022 Class B (CISPR 22B)VCCI Class B Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 at 1040.11EN60950, EN (IEC) 60825-1,2 Compatible sa Class 1 laserproduct. • Inirerekomendang Circuit SFP Host Inirerekomendang Circuit • Mechanical Dimensions Mechanical Drawing Order Information: Model No. Paglalarawan ng Goods Wavelength JHA3405 1.25G Multimode Dual Fiber 550m 850nm JHA3405D 1.25G Multimode Dual Fiber 5850m DDM 5850m 1.25G Single Mode Dual Fiber 20Km 1310nm JHA3420D 1.25G Single Mode Dual Fiber 20Km DDM 1310nm JHA3440 1.25G Single Mode Dual Fiber 40Km 1310nm JHA3440D 1.25G 1.25G Single Mode JHA3480 1.25G Single Mode Dual Fiber 80Km 1550nm JHA3480D 1.25G Single Mode Dual Fiber 80Km DDM 1550nm Ang JHA ay may karapatang gumawa ng mga pagbabago sa mga produkto o impormasyong nakapaloob dito nang walang abiso. Walang pananagutan ang ipinapalagay bilang resulta ng kanilang paggamit o aplikasyon. Walang mga karapatan sa ilalim ng anumang patent na kasama ng pagbebenta ng anumang naturang produkto o impormasyon. Nai-publish ng Shenzhen JHA Technology Co., Ltd Copyright © Shenzhen JHA Technology Co., Ltd All Rights Reserved
Pagtatanong
Detalye