Zoo Siab Interface Converter Rs232 - E1-16 Channel RS232 / RS422 / RS485 Converter JHA-CE1D16 / R16 / Q16 - JHA

E1-16 Channel RS232/RS422/RS485 ConverterJHA-CE1D16/R16/Q16

Txheej txheem cej luam

Qhov no interface converter yog raws li FPGA, muab 16Channel RS232/485/422 kis tau tus mob ntawm E1 interface. Cov khoom tawg los ntawm kev tsis sib haum xeeb ntawm cov tsoos serial interface kev sib txuas lus deb thiab kev sib txuas lus tus nqi, dhau li ntawd, nws kuj tuaj yeem daws cov teeb meem electromagnetic cuam tshuam, hauv av nplhaib cuam tshuam thiab xob laim puas. Cov cuab yeej zoo heev txhim kho kev ntseeg siab, kev ruaj ntseg thiab tsis pub lwm tus paub ntawm cov ntaub ntawv sib txuas lus. Nws yog dav siv rau ntau yam kev lag luam kev lag luam, kev tswj cov txheej txheem thiab kev tswj xyuas tsheb, tshwj xeeb tshaj yog rau lub txhab nyiaj, thiab Lub Hwj Chim thiab lwm cov haujlwm thiab cov tshuab uas muaj cov kev cai tshwj xeeb ntawm electromagnetic cuam tshuam ib puag ncig. RS232 / RS485 / RS422 channel tuaj yeem xa cov ntaub ntawv hloov pauv tau asynchronously 0Kbps-14400bps baud tus nqi.

Khoom duab

19inch 1U hom

Nta

• Raws li tus kheej-copyright IC
• Kev them nyiaj yug 3 kab RS232 (TXD, RXD, GND), txhawb kev khiav tswj CD, DSR, CTS
• Muaj peb Loop Back Hom: E1 interface Loop Back (ANA),RS232/485/422 interface Loop Back (DIG),Hais kom cov chaw taws teeb RS232/485/422 interface Loop Back (REM)
• RS232 / RS485 / RS422 txhawb nqa kub-plug, txhawb nqa DTE lossis DCE ntaus ntawv sib cuam tshuam
• RS232 / RS485 / RS422 channel tuaj yeem xa cov ntaub ntawv hloov pauv tau asynchronously 0Kbps-14400bps baud tus nqi
• Muaj pseudo random code xeem muaj nuj nqi, kab qhib tau yooj yim, tuaj yeem siv los ua 2M BER Tester
• Serial chaw nres nkoj interface xob laim tiv thaiv mus txog IEC61000-4-5 (8/20μS) DM (Differential Mode): 6KV, Impedance (2 Ohm), CM (Common Hom): 6KV, Impedance (2 Ohm) tus qauv
• Muab 2 impedances: 75 Ohm unbalance thiab 120 Ohm tshuav nyiaj li cas;
• Nws tuaj yeem tsim E1 serial converter (A) - E1 fiber optic Modem (B) - fiber ntau Modem (C) topology
• AC 220V, DC-48V, DC + 24V, DC Fais Fab thiab Polarity-dawb

Tsis muaj

♦E1 interface

Interface Standard: ua raws li txoj cai G.703;

Interface tus nqi: 2048Kbps ± 50ppm;

Interface Code: HDB3;

impedance: 75Ω (tsis sib npaug), 120Ω (sib npaug);

Jitter kam rau ua: Raws li txoj cai G.742 thiab G.823

Tso cai attenuation: 0 ~ 6dBm

♦Serial interface

Txuj

EIA/TIA-232 RS-232 (ITU-T V.28)

EIA/TIA-422 RS-422 (ITU-T V.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Serial Interface

RS-422: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 4 wires: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 2 xov tooj: Data+(Correspond TX+), Data-(TX-), Teeb liab av

RS-232: RXD, TXD, Signal Ground

♦Ua haujlwm ib puag ncig

Ua haujlwm kub: -10 ° C ~ 50 ° C

Ua hauj lwm av noo: 5% ~ 95% (tsis condensation)

Cia kub: -40 ° C ~ 80 ° C

Cia Humidity: 5% ~ 95% (tsis muaj condensation)

Specifications

Daim ntawv thov

Kev daws teeb meem 1

Kev daws teeb meem 2