Tus nqi tsim nyog Pdh Mux - 8E1 + 4GE PDH Fiber Multiplexer JHA-CPE8G4 - JHA

8E1 + 4GE PDH Fiber Multiplexer JHA-CPE8G4

Txheej txheem cej luam

Cov cuab yeej no yog qhov point-to-point optical transmission device tsim los ntawm VLSI. Cov cuab yeej muab 1-8 * E1 interface, 1-4 * 10/100/1000M Ethernet interface (Wire Speed ​​1000M) thiab 2 expansion interfaces. 4 * Ethernet interface yog hloov pauv, tuaj yeem txhawb VLAN. 1 expansion interface yuav siv tau raws li cov kis tau tus mob channel ntawm RS232 / RS485 / RS422 asynchronous cov ntaub ntawv, qhuav hu teeb liab, 1Channel digital lag luam xov tooj tuaj yeem xaiv tau. Nws hloov tau yooj yim heev. Nws muaj lub tswb ua haujlwm. Kev ua haujlwm yog txhim khu kev qha, ruaj khov, thiab kev siv hluav taws xob tsawg, kev sib koom ua ke siab, me me.

Khoom duab

Nta

• Raws li tus kheej-copyright IC
• Fiber bandwidth yog mus txog 1.5G, Ethernet bandwidth yog Hlau Ceev 1000M
• Ethernet interface tus nqi yog 10/100/1000M, ib nrab / puv duplex Auto-Nego
• 4 * Ethernet interface yog hloov pauv, txhawb VLAN, tuaj yeem teeb tsa rau 4 channel kev sib cais
• Muab Console tswj interface (RS232)
• Muab ob fiber ntau interface 1 + 1 tiv thaiv(APS)muaj nuj nqi
• E1 interface ua raws li G.703, txais yuav cov moos digital rov qab thiab du theem-xauv tshuab
• Siv tus qauv 2 xov tooj xov tooj (tsis yog xov tooj tuav) teeb tsa raws li kev txiav txim hluav taws xob-xaim xov tooj (yeem)
• Thaum kho qhov muag poob teeb liab, nws tuaj yeem ntes cov khoom siv tej thaj chaw deb yog hluav taws xob lossis fiber ntau raug txiav, thiab qhia lub tswb los ntawm LED
• Cov cuab yeej hauv zos tuaj yeem saib cov cuab yeej ua haujlwm nyob deb
• Muab 2 expansion interface, koj tuaj yeem txuas ntxiv 1 ~ 2Channel asynchronous cov ntaub ntawv, xws li RS232 / RS485 / RS422 / Manchester code;
• Muab cov lus txib rau tej thaj chaw deb interface Loop Back, txhawb lub zos E1 Loop Back muaj nuj nqi, txhawb E1 LOS thiab AIS tswb, yooj yim kho kab
• Qhov kev ncua deb yog mus txog 2-100Km yam tsis muaj kev cuam tshuam
• Txhawb SNMP tus thawj tswj (SNMP tus neeg sawv cev sab hauv)
• AC 220V, DC-48V, DC24V tuaj yeem xaiv tau
• DC-48V / DC24V fais fab mov polarity nrhiav pom muaj nuj nqi, Polarity-dawb

Tsis muaj

♦Fiber ntau

Fiber ntau hom

50/125um, 62.5/125um,

Qhov siab tshaj plaws kis tau tus mob: 5Km @ 62.5 / 125um ib hom fiber ntau, attenuation (3dbm / km)

Wave Length: 820nm

Kev xa hluav taws xob: -12dBm (Min) ~ -9dBm (Max)

Txais rhiab heev: -28dBm (Min)

Txuas pob nyiaj siv: 16dBm

Ib hom Fiber

8/125um, 9/125um

Qhov siab tshaj plaws kis tau tus mob: 40Km

Kev sib kis nrug: 40Km @ 9 / 125um ib hom fiber ntau, attenuation (0.35dbm / km)

Wave Length: 1310nm

Kev xa hluav taws xob: -9dBm (Min) ~ -8dBm (Max)

Txais rhiab heev: -27dBm (Min)

Txuas pob nyiaj siv: 18dBm

♦E1 interface

Interface Standard: ua raws li txoj cai G.703;
Interface tus nqi: 2048Kbps ± 50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (tsis sib npaug), 120Ω (sib npaug);

Jitter kam rau ua: Raws li txoj cai G.742 thiab G.823

Tso cai attenuation: 0 ~ 6dBm

♦Gigabit Ethernet Interface (10/100/1000M)

Interface tus nqi: 10/100/1000M, ib nrab / puv duplex pib-kev sib tham

Interface Standard: Tau tshaj IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Chaw Nyob Muaj Peev Xwm: 4096

Connector: RJ45, txhawb Auto-MDIX

♦Ua haujlwm ib puag ncig

Ua haujlwm kub: -10 ° C ~ 50 ° C

Ua hauj lwm av noo: 5% ~ 95% (tsis condensation)

Cia kub: -40 ° C ~ 80 ° C

Cia Humidity: 5% ~ 95% (tsis muaj condensation)

Specifications

Daim ntawv thov