100G QSFP28 kabel optik aktip JHA-QSFP28-100G-AOC
Fitur
◊ Rojongan 100GBASE-SR4 / aplikasi EDR
◊ Patuh kana QSFP28 Eléktro MSA SFF-8636
◊ Laju multi nepi ka 25.78125Gbps
◊ Transmisi jarak nepi ka 100m
◊ + 3.3V catu daya tunggal
◊ Konsumsi kakuatan low
◊ Operasi temp komérsial: 0 °C nepi ka +70 °C
◊ RoHS patuh
◊ kabel sertifikasi UL (opsional)
Aplikasi
◊ 100GBASE-SR4 di 25.78125Gbps per jalur
◊ Infini Band QDR, EDR
◊ Tumbu optik séjén
spésifikasi:
Peunteun Maximum Absolute
Méja1- Peunteun Maximum Absolute
| Parameter | Lambang | Min. | has | Max. | Unit | Catetan |
| Tegangan suplai | Vcc3 | -0,5 | - | +3.6 | V | |
| Suhu Panyimpenan | Ts | -10 | - | +70 | °C | |
| Kalembaban Operasi | RH | +5 | - | +85 | % | 1 |
Catetan: 1 Taya kondensasi
Disarankeun Kaayaan Operasi
Méja2- Disarankeun kaayaan operasi
| Parameter | Lambang | Min. | has | Max. | Unit | Catetan |
| Suhu Kasus Operasi | TC | 0 | - | +70 | °C | |
| Tegangan catu daya | Vcc | 3.14 | 3.3 | 3.47 | V | |
| Dissipation kakuatan | Pd | - | - | 2.5 | W | 1 |
| Bit Rate | BR | 10.3125 | 25.78125 | - | Gbps |
Catetan: 1 Per Terminal
Karakteristik listrik
Méja3- Karakteristik listrik
| Parameter | Lambang | Min. | Tip. | Max. | Hijian | Catetan | |
| ModSelL | Pilih Modul | VOL | 0 | - | 0.8 | V | |
| Modél Batal Pilih | VOH | 2.5 | - | VCC | V | ||
| LPMode | Mode Daya Lemah | VIL | 0 | - | 0.8 | V | |
| Operasi Normal | VIH | 2.5 | - | VCC+0.3 | V | ||
| ResetL | Reset | VIL | 0 | - | 0.8 | V | |
| Operasi Normal | VIH | 2.5 | - | VCC+0.3 | V | ||
| ModPrsL | Operasi Normal | VOL | 0 | - | 0.4 | V | |
| IntL | ngaganggu | VOL | 0 | - | 0.4 | V | |
| Operasi Normal | VoH | 2.4 | - | VCC | V | ||
| Pamancar listrik Ciri | |||||||
| Diferensial Tanggal Input ayun | Vin,pp | 200 | - | 1600 | mV | ||
| Kaluaran impedansi diferensial | Zin | 90 | 100 | 110 | Ω | ||
| Karakteristik panarima listrik | |||||||
| Diferensial Data Kaluaran ayun | Vout | 200 | - | 800 | mV | ||
| Laju Kasalahan Bit | BER | - | - | E-12 | - | 1 | |
| Input impedansi diferensial | ZD | 90 | 100 | 110 | Ω | ||
Catetan: 1 PRBS2^31-1@25.78125Gbps
Disarankeun Interface Circuit
angka 1, Interface dianjurkeun
Susunan pin
Gambar 2, Pin View
Méja4-Pin Fungsi Harti
| Pin | Lambang | Ngaran / Katerangan | Catetan |
| 1 | GND | taneuh | 1 |
| 2 | Tx2n | Pamancar Inverted Data Input | |
| 3 | Tx2p | Pamancar Input Data Non-Inverted | |
| 4 | GND | taneuh | 1 |
| 5 | tx4n | Pamancar Inverted Data Input | |
| 6 | tx4p | Pamancar Input Data Non-Inverted | |
| 7 | GND | taneuh | 1 |
| 8 | ModSelL | Pilih Modul | |
| 9 | ResetL | Reset modul | |
| 10 | Vcc Rx | + 3.3V Power Supply panarima | |
| 11 | SCL | 2-kawat jam panganteur serial | |
| 12 | SDA | 2-kawat data panganteur serial | |
| 13 | GND | taneuh | 1 |
| 14 | rx3p | Receiver Non-Inverted Data Kaluaran | |
| 15 | Rx3n | Receiver Inverted Data Kaluaran | |
| 16 | GND | taneuh | 1 |
| 17 | Rx1p | Receiver Non-Inverted Data Kaluaran | |
| 18 | Rx1n | Receiver Inverted Data Kaluaran | |
| 19 | GND | taneuh | 1 |
| 20 | GND | taneuh | 1 |
| 21 | Rx2n | Receiver Inverted Data Kaluaran | |
| 22 | Rx2p | Receiver Non-Inverted Data Kaluaran | |
| 23 | GND | taneuh | 1 |
| 24 | Rx4n | Receiver Inverted Data Kaluaran |
| Pin | Lambang | Ngaran / Katerangan | Catetan |
| 25 | rx4p | Receiver Non-Inverted Data Kaluaran | |
| 26 | GND | taneuh | 1 |
| 27 | ModPrsL | Modul Hadir | |
| 28 | IntL | ngaganggu | |
| 29 | Vcc Tx | + 3.3V Power supply pamancar | |
| 30 | Vcc1 | + 3.3V kakuatan suplai | |
| 31 | LPMode | Mode Daya Lemah | |
| 32 | GND | taneuh | 1 |
| 33 | tx3p | Pamancar Input Data Non-Inverted | |
| 34 | tx3n | Pamancar Inverted Data Input | |
| 35 | GND | taneuh | 1 |
| 36 | Tx1p | Pamancar Input Data Non-Inverted | |
| 37 | Tx1n | Pamancar Inverted Data Input | |
| 38 | GND | taneuh | 1 |
Catetan: 1. Sirkuit taneuh ieu internal terasing tina taneuh chassis.
Spésifikasi ngawaskeun
Angka3, Peta Mémori
Diagram Desain Mékanis
Hijian mm
Méja 5- Kabel
Panjangna
| Panjang kabelL(Unit: m） | Sabar(Unit: cm） |
| ≤1.0 | +5/-0 |
| 1.0<L≤4.5 | +15/-0 |
| 4.5<L≤14.5 | +30/-0 |
| > 14.5 | +2%/-0 |
Perhatosan
Penanganan pancegahan:Alat ieu rentan ka ruksak salaku hasil tina muatan éléktrostatik (ESD).
Lingkungan bébas statik disarankeun pisan.Turutan tungtunan nurutkeun prosedur ESD ditangtoskeun.
Kasalametan Laser: Radiasi anu dipancarkeun ku alat laser tiasa bahaya pikeun panon manusa.Hindarkeun paparan panon ka radiasi langsung atanapi henteu langsung.
