2 10/100TX PoE/PoE+ and 1 100FX | Unmanaged Industrial PoE Switch JHA-IF12P

Short Description:

3-port Unmanaged Industrial PoE Switch, with 2 10/100Base-T(X) IEEE802.3af/at PoE/PoE+ Port and 1 100Base-FX Fiber Port


Product Detail

Product Tags

Features

♦ Support 2 10/100Base-T(X) PoE/PoE+ port and 1 100Base-FX fiber port.

♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at.

♦ Support IEEE802.3af, maximum 15.4W power supply.

♦ Support IEEE802.3at, maximum 30W power supply.

♦ Industrial chip design, 15kV ESD protection, 8kV surge protection.

♦ DC48-58V redundancy power, reverse polarity protection. 

♦ Industrial grade 4 design, -40-85°C operating temperature.

♦ IP40 rated aluminum alloy housing, DIN-Rail mounted.

Introduction

JHA-IF12P is a plug-and-play unmanaged industrial PoE switch. This switch provides 2 10/100Base-T(X) Ethernet port and 1 100Base-FX fiber port, the Ethernet port support Power-over-Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
JHA-IF12P support CE, FCC, RoHS standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power input (DC48-58V). The switch support IEEE802.3, IEEE802.3u, IEEE802.3x with 10/100Base-T(X), full/half-duplex, and MDI/MDI-X auto-adaptation, the -40-85operating temperature, can meet all kinds of industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.

Specification

Protocol Standard

IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at

Flow Control

IEEE802.3x flow control, back press flow control

Switching Performance

Forwarding Rate: 0.744MppsTransmission Mode: Store and ForwardPacket Buffer Size: 512KBackplane Bandwidth: 1GbpsMAC Table Size: 1K Delay Time: < 3μs

Ethernet Port

10/100Base-T(X) auto speed control, half/full duplex and MDI/MDI-X auto-adaptation

Fiber Port

100Base-FX fiber port

PoE

Pin-out: 1/2(+), 3/6(-), IEEE802.3af max 15.4w, IEEE802.3at max 30w.

LED Indicator

Power Indicator: PWRPort Indicator: LINK / ACT

Power Supply

Input Voltage: DC48-58VConnector: 6 bit 5.08mm removable terminal blockFull Load: <4WProtection Mechanism: overload protection, reverse connection protection, redundancy protection

Mechanical Structure

Shell: IP40 protection, aluminum alloy housingDimension: 143*104*48mm( L*W*H )Weight: 500gInstallation: DIN-Rail mounting, wall mounting

Operating Environment

Operating Temperature: -40-85°CStorage Temperature: -40-85°CAmbient Relative Humidity: 5%-95% (non-condensing)

Industry Standards

EMI:FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)EN61000-4-3 (R/S), Level 3 at 10V/mEN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)EN61000-4-5 (Surge), Level 4 at 4kVEN61000-4-6 (CS), Level 3 at 10V/m

EN61000-4-8, Level 5 at 100A/m

Shock:IEC 60068-2-27

Free Fall:IEC 60068-2-32

Vibration:IEC 60068-2-6

Certification

CE, FCC, RoHS

MTBF

>100,000 Hours

Warranty

5-years

Dimension

3

Order Information

Model No.

Description of Goods

JHA-IF12P

Unmanaged Industrial PoE Switch, 2 10/100Base-T(X) PoE/PoE+ and 1 100Base-FX, SC Connector, Multimode, Dual Fiber, 2Km, DIN-Rail, DC48-58V, -40-85°C Operating Temperature

JHA-IF12P-20

Unmanaged Industrial PoE Switch, 2 10/100Base-T(X) PoE/PoE+ and 1 100Base-FX, SC Connector, Single Mode, Dual Fiber, 20Km, DIN-Rail, DC48-58V, -40-85°C Operating Temperature

JHA-IF12WP-20

Unmanaged Industrial PoE Switch, 2 10/100Base-T(X) PoE/PoE+ and 1 100Base-FX, SC Connector, Single Mode, Single Fiber, 20Km, DIN-Rail, DC48-58V, -40-85°C Operating Temperature

JHA-IFS12P

Unmanaged Industrial PoE Switch, 2 10/100Base-T(X) PoE/PoE+ and 1 100Base-X SFP Slot, DIN-Rail, DC48-58V, -40-85°C Operating Temperature
Fiber Connector: SC/ST/FC/LC(SFP Slot), Single Mode/Multimode, Dual Fiber/Single Fiber, 2Km/20Km/40Km/60Km/80Km/100Km/120Km is Optional.Power Supply: DC48V DIN-Rail Power Supply or Power Adapter is Optional.

  • Previous:
  • Next:

  • Write your message here and send it to us