8 10/100/1000TX PoE + 2 1000X SFP Slot | Smart PoE Switch JHA-P42008BMHGW

Short Description:

* 8*10/100/1000M + 2*1000M SFP Slot Smart PoE Switch,1-8 ports support IEEE 802.3af/at;
* Comply with IEEE 802.3, IEEE 802.3u standards;
* PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port;
* Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables;
* The power supply total is 120W;
* 3 years warranty.


Overview

Feature

Specification

Dimension

Order Information

Download

Introduction

The JHA-P42008BMHGW is a full gigabit PoE fiber switch. It has 8*10/100/1000M RJ45 ports and 2*1000M SFP slot ports. Port 1-8 can support IEEE 802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 120W . As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal  cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Unmanaged model, plug and play, no configuration, easy to use.

 


  • Previous:
  • Next:

  • Feature

    ◇ Full gigabit access, gigabit SFP port uplink

    * All series supports “gigabit Ethernet port and gigabit SFP fiber port ” combination, which enables users to flexibly build networking to meet the needs of various scenarios.

    * Support non-blocking wire-speed forwarding.

    * Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

    ◇ Intelligent PoE power supply

    * 8*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

    * IEEE802.3af/at PoE standard, without damaging non-PoE devices.

    * Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

    ◇ Stable and reliable

    * Low power consumption, galvanized steel casing, The fan active cooling.

    * Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

    * CCC,CE, FCC, RoHS.

    * The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.

    *  Plug and play, no configuration, simple and convenient.

    Specification

    Model

    JHA-P42008BMHGW

    Interface Characteristics

    Fixed Port

    8*10/100/1000Base-T PoE ports (Data /Power)

    2*1000Base-X uplink SFP ports (Data)

    Ethernet Port

    Port 1-8 can support 10/100/1000Base-T,auto-sensing, full/half duplex MDI/MDI-X

    Twisted Pair Transmission

    10BASE-T: Cat3,4,5 UTP(≤100 meter)

    100BASE-TX: Cat5 or later UTP(≤100 meter)

    1000BASE-T: Cat5e or later UTP(≤100 meter)

    SFP Slot Port

    Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)

    Optical Cable

    Multi-mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.

    Chip Parameter

    Network Protocol

    IEEE802.3 10BASE-T, IEEE802.3i 10Base-T

    IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T

    IEEE802.3z 1000Base-X, IEEE802.3x

    Forwarding Mode

    Store and Forward(Full Wire Speed)

    Switching Capacity

    20Gbps (Non-blocking)

    Forwarding

    Rate@64byte

    14.88Mpps

    MAC

    8K

    Buffer Memory

    4M

    Jumbo Frame

    9.6K

    LED Indicator

    Power: PWR (green), network :Link (yellow), PoE: PoE(green), fiber port :L/A (green)

    PoE & Power Supply

    PoE Port

    Port 1 to 8 IEEE802.3af/at @ POE

    Power Supply Pin

    Default 1/2 (+), 3/6 (-), optional 4/5 (+), 7/8 (-) 

    Max Power Per Port

    30W; IEEE802.3af/at

    Total PWR / Input Voltage

    120W (AC100-240V)

     

    Power Consumption

    Standby<6W,Full load<120W

     

    Power Supply

    External power adapter,

    AC100~240V 50-60Hz 2.3A

     

    Physical Parameter

    Operation TEMP / Humidity

    -20~+55°C;5%~90% RH Non condensing 

    Storage TEMP / Humidity

    -40~+75°C;5%~95% RH Non condensing

    Dimension (L*W*H)

    195*130*40mm

    Net /Gross Weight

    <0.9kg / <1.2kg

     

    Installation

    Desktop, wall mounted,19 inch 1U cabinet

    Certification & Warranty

    Lightning protection / protection level

    Lightning protection: 4KV 8/20us; Protection level: IP30

    Certification

    CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS

    Warranty

    3 years

    Dimension

    JHA size

    Order Information

    Model

    Description  

    JHA-P42008BMHGW

    Unmanaged PoE fiber switch ,8*10/100/1000M RJ45 ports+2*1000M uplink SFP fiber slot ports, built-in 120W power supply, support IEEE802.3af/at PoE standard. Support 1U/19 inch rack installation.

    Note: The SFP optical module is not included by default and needs to be purchased separately.

  • pdf
    JHA-P42008BMHGW Datasheet
    pdf
  • Write your message here and send it to us