Good Quality SFP Module – 155M Multi-mode 2Km 850nm | Dual Fiber SFP Transceiver JHA3202-85 – JHA

Short Description:


Overview

Related Video

Feedback (2)

Download

Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for Patch Cord, Ahd Fiber Video Converter, Rs485 422 Converter, Striving hard to attain continual success based on quality, reliability, integrity, and complete understanding of market dynamics.
Good Quality SFP Module – 155M Multi-mode 2Km 850nm | Dual Fiber SFP Transceiver JHA3202-85 – JHA Detail:

Features:                                              

♦ Up to 155Mb/s Data Links 

♦ Hot-Pluggable

♦ Duplex LC connector

♦ Up to 2 km on 50/125μm MMF

♦ 850nm VCSEL laser transmitter 

♦ Single +3.3V Power Supply

♦ Maximum Power <1W 

♦ Industrial /Extended/ Commercial operating temperature range: -40°C to 85°C/-5°C to 85°C/-0°C to 70°C Version available

♦ RoHS compliant and Lead Free

Applications:

♦ SONET OC-3/SDH STM-1

♦ Fast Ethernet

♦ Other Optical Links

Description:

JHA’s JHA3202-85 Transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 850 nm VCSEL laser, up to 14dB link budge ensure this module SONET OC-3/SDH STM-1 2Km application.

• Absolute Maximum Ratings

Parameter

Symbol Min. Typical Max. Unit
Storage Temperature

TS

-40

 

+85

°C

Supply Voltage

VCC

-0.5

 

4

V

Relative Humidity

RH

0

 

85

%

• Recommended Operating Environment:

Parameter

Symbol Min. Typical Max. Unit
Case operating Temperature Industrial

TC

-40

 

85

°C

Extended

-5

 

85

°C

Commercial

0

 

+70

°C

Supply Voltage

VCC

3.135

 

3.465

V

Supply Current

Icc

 

 

280

mA

Inrush Current

Isurge

 

 

Icc+30

mA

Maximum Power

Pmax

 

 

1

W

• Electrical Characteristics(TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter

Symbol Min. Typical Max. Unit Note
Transmitter Section:  
Input differential impedance

Rin

90

100

110

W

1

Single ended data input swing

Vin PP

250

 

1200

mVp-p

 

Transmit Disable Voltage

VD

Vcc – 1.3

 

Vcc

V

2

Transmit Enable Voltage

VEN

Vee

 

Vee+ 0.8

V

 

Transmit Disable Assert Time

Tdessert

 

 

10

us

 

Receiver Section:  
Single ended data output swing

Vout,pp

300

 

800

mv

3

Data output rise time

tr

 

 

500

ps

4

Data output fall time

tf

 

 

500

ps

4

LOS Fault

Vlosfault

Vcc – 0.5

 

VCC_host

V

5

LOS Normal

Vlos norm

Vee

 

Vee+0.5

V

5

Power Supply Rejection

PSR

100

 

 

mVpp

6

Note:

  1. AC coupled.
  2. Or open circuit.
  3. Into 100 ohm differential termination.
  4. 20 – 80 %
  5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
  6. All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000.

• Optical Parameters(TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter

Symbol Min. Typical Max. Unit Note
Transmitter Section:
Center Wavelength

λc

840

850

860

nm

 

Spectral Width

σ

 

 

0.85

nm

 

Optical Output Power

Pout

-10

 

-3

dBm

1

Optical Rise/Fall Time

tr / tf

 

 

500

ps

2

Extinction Ratio

ER

8.2

 

 

dB

 

Generated Jitter (peak to peak)

JTXp-p

 

 

0.07

UI

3

Generated Jitter (rms)

JTXrms

 

 

0.07

UI

3

Eye Mask for Optical Output Compliant with G.957(class 1 laser safety)  
Receiver Section:  
Optical Input Wavelength

λc

770

 

870

nm

 

Receiver Overload

Pol

-8

 

 

dBm

4

RX Sensitivity

Sen

 

 

-24

dBm

4

RX_LOS Assert

LOS A

-40

 

 

dBm

 

RX_LOS De-assert

LOS D

 

 

-25

dBm

 

RX_LOS Hysteresis

LOS H

0.5

 

 

dB

 

General Specifications:
Data Rate

BR

 

155

 

Mb/s

 

Bit Error Rate

BER

 

 

10-12

 

 

Max. Supported Link Length on 50/125μm MMF@155Mb/s

LMAX

 

2

 

km

 

Total System Budget

LB

14

 

 

dB

 

Note

  1. The optical power is launched into MMF.
  2. 20-80%.
  3. Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253.
  4. Measured with PRBS 27-1 at 10-12 BER

• Pin Assignment

Diagram of Host Board Connector Block Pin Numbers and Name

4

Diagram of Host Board Connector Block Pin Numbers and Names

• Pin Function Definitions

Pin No

Name

Function

Plug Seq

Notes

1 VeeT Transmitter Ground 1 1
2 TX Fault Transmitter Fault Indication 3  
3 TX Disable Transmitter Disable 3 2
4 MOD-DEF2 Module Definition 2 3
5 MOD-DEF1 Module Definition 1 3 3
6 MOD-DEF0 Module Definition 0 3 3
7 Rate Select Not Connected 3 4
8 LOS Loss of Signal 3 5
9 VeeR Receiver Ground 1 1
10 VeeR Receiver Ground 1 1
11 VeeR Receiver Ground   1
12 RD- Inv. Received Data Out 3 6
13 RD+ Received Data Out 3 6
14 VeeR Receiver Ground 3 1
15 VccR Receiver Power 2 1
16 VccT Transmitter Power 2  
17 VeeT Transmitter Ground 1  
18 TD+ Transmit Data In 3 6
19 TD- Inv. Transmit In 3 6
20 VeeT Transmitter Ground 1  

Notes:

  1. Circuit ground is internally isolated from chassis ground.
  2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
  3. Should be pulled up with 4.7k – 10 kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
  4. Rate select is not used
  5. LOS is open collector output. Should be pulled up with 4.7k – 10 kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
  6. AC Coupled

• SFP Module EEPROM Information

The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472. The serial ID information of the SFP modules can be accessed through the I2C interface at address A0h.

EEPROM Serial ID Memory Contents (A0h)

Data Address

Length

(Byte)

Name of

Length

Description and Contents

Base ID Fields

0

1

Identifier

Type of Serial transceiver (03h=SFP)

1

1

Reserved

Extended identifier of type serial transceiver (04h)

2

1

Connector

Code of optical connector type (07=LC)

3-10

8

Transceiver

 

11

1

Encoding

NRZ(03h)

12

1

BR, Nominal

Nominal baud rate, unit of 100Mbps

13-14

2

Reserved

(0000h)

15

1

Length(9um)

Link length supported for 9/125um fiber, units of 100m

16

1

Length(50um)

Link length supported for 50/125um fiber, units of 10m

17

1

Length(62.5um)

Link length supported for 62.5/125um fiber, units of 10m

18

1

Length(Copper)

Link length supported for copper, units of meters

19

1

Reserved

 

20-35

16

Vendor Name

SFP vendor name: JHA

36

1

Reserved

 

37-39

3

Vendor OUI

SFP transceiver vendor OUI ID

40-55

16

Vendor PN

Part Number: “JHA3202-85” (ASCII)

56-59

4

Vendor rev

Revision level for part number

60-62

3

Reserved

 

63

1

CCID

Least significant byte of sum of data in address 0-62
Extended ID Fields

64-65

2

Option

Indicates which optical SFP signals are implemented(001Ah = LOS, TX_FAULT, TX_DISABLE all supported)

66

1

BR, max

Upper bit rate margin, units of %

67

1

BR, min

Lower bit rate margin, units of %

68-83

16

Vendor SN

Serial number (ASCII)

84-91

8

Date code

JHA’s Manufacturing date code

92-94

3

Reserved

 

95

1

CCEX

Check code for the extended ID Fields (addresses 64 to 94)
Vendor Specific ID Fields

96-127

32

Readable

JHA specific date, read only

128-255

128

Reserved

Reserved for SFF-8079

• Regulatory Compliance

The JHA3202-85 complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following).

Electrostatic Discharge(ESD) to the Electrical Pins MIL-STD-883EMethod 3015.7 Class 1(>1000 V)
Electrostatic Discharge (ESD)to the Duplex LC Receptacle IEC 61000-4-2GR-1089-CORE Compatible with standards
ElectromagneticInterference (EMI) FCC Part 15 Class BEN55022 Class B (CISPR 22B)VCCI Class B Compatible with standards
Laser Eye Safety FDA 21CFR 1040.10 and 1040.11EN60950, EN (IEC) 60825-1,2 Compatible with Class 1 laserproduct.

 

• Recommended Circuit

3

SFP Host Recommended Circuit

• Mechanical Dimensions

2

Mechanical Drawing


Product detail pictures:

Good Quality SFP Module – 155M Multi-mode 2Km 850nm | Dual Fiber SFP Transceiver JHA3202-85 – JHA detail pictures


Related Product Guide:

"Based on domestic market and expand overseas business" is our development strategy for Good Quality SFP Module – 155M Multi-mode 2Km 850nm | Dual Fiber SFP Transceiver JHA3202-85 – JHA , The product will supply to all over the world, such as: Philadelphia, Uzbekistan, Turkey, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our experienced advice and service can lead to more suitable choice for the customers.

As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
5 Stars By Austin Helman from Puerto Rico - 2018.11.04 10:32
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
5 Stars By Alma from Salt Lake City - 2018.12.22 12:52
Write your message here and send it to us