Manufacturer for E1 To Fiber Interface Converter - 4E1+4FE(Physical isolation) JHA-CPE4WF4 PDH Fiber Multiplexer – JHA

Short Description:

Overview

Feedback (2)

Download

Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for Pdh Gateway, Usb To Rs232 Converter, Optical Dwdm, We appreciate your enquiry and it's our honor to work with every friend worldwide.

Manufacturer for E1 To Fiber Interface Converter - 4E1+4FE(Physical isolation) JHA-CPE4WF4 PDH Fiber Multiplexer – JHA Detail:

4E1+4FE(Physical isolation) JHA-CPE4WF4

PDH Fiber Multiplexer

Overview

This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-4 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface. 2 Extended service interface can be used as RS232 / RS485 / RS422 asynchronous data , the application is very flexible. Optional one digital service telephone, the application is very flexible. With a sound alarm function, the whole stable, reliable, low power consumption, high integration, small size.

Product Photo

Features

Based on self-copyright IC
1-4 physical isolation 10/100M Fast Ethernet interface , every FE Ethernet independent wire speed is 100M,total bandwidth is 4*100M;
Provide Console manage interface (RS232)
Provide two fiber interface 1+1 protect（APS）function
Ethernet interface rate is 10/100M, half/full duplex Auto-Nego
Ethernet package support jumbo frames,up to 10240 byte
E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology
Uses standard 2 wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)
When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED
The local device can view the remote device working condition
Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance
The transmission distance is up to 2-100Km without interruption
Support SNMP manager (SNMP agent inside)
AC 220V, DC-48V, DC24V can be optional
DC-48V/DC24V power supply polarity detection function, Polarity-Free

Parameters

♦ Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

♦ E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

♦ Ethernet interface (10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model	Model Number: JHA-CPE4WF4
Functional Description	4E1 PDH， 4 * Ethernet physical isolation（total Band width 4*100M），order wire phone，19”inch 1U，with Console , SNMP，1+1 Back up Optic fiber
Port Description	1+1 optical port, 4E1 interfaces (75/120ohms), 4 FE interfaces,1RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface
Power	Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤10W
Dimension	Product Size: 19 inch 1U 483X138X45mm(WXDXH)
Weight	3KG

Application

Product detail pictures:

Related Product Guide:

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Manufacturer for E1 To Fiber Interface Converter - 4E1+4FE(Physical isolation) JHA-CPE4WF4 PDH Fiber Multiplexer – JHA , The product will supply to all over the world, such as: Jersey, Vietnam, Singapore, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!