10/100TX – 100FX | Single Fiber Media Converter JHA-F11W

Short Description:

2-port Fiber Media Converter, Single Fiber, Single Mode 1-port 100Base-FX and 1-port 10/100Base-T(X)


Product Detail

Product Tags

Introduction

JHA-F11W series is a single fiber media converter complies with IEEE802.3 standards, It is designed to convert data signal between 100Base-FX and 10/100Base-T(X) fast Ethernet.

The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable.

This converter model can be used as slide-in module to the 14-slot 19″ Rack-Mount Chassis.

Converter is transparent to all protocols, can be used all all areas as Fiber to The Home, Fiber to the Business or Fiber to The Curb.

Features

Compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 100Base-FX standards.

 It supports TCP / IP, PPPOE, DHCP, ICMP, NAT protocol.

 Flow control: Full duplex using IEEE 802.3X, a standard half-duplex adopt Backpressure.

 Electrical ports support auto-negotiation function, automatically adjusts the transmission and transfer rates.

 Ports support Auto-MDI / MDIX auto-flip.

 Support store and forward mode.

 Supports 10M, 100M mode or adaptive mode.

 Provide status indicators, external power supply (output 5V ~ 50HZ 1A).

 The card design, to facilitate future maintenance and inspection equipment.

 Modular power supply design, function board with separate power supply design, easy to post-maintenance.

 Unique IC solutions, the chip temperature low, to get rid of plus cooling system, flow control and reduce broadcast storms.

 High-quality integrated photovoltaic module provides good optical properties and electrical properties to ensure reliable transmission, long life.

 Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward.

 It supports up to 1916 byte long data packet transmission.

 Missing link to provide remote diagnostics, electrical interface and optical port link link connection diagnostics, dynamic data transmission, full-duplex / half duplex, speed light, easy installation and later maintenance.

 Ultra-low power consumption of less than 2.5W (Input: AC140 ~ 260V), low heat, stable operation for a long time.

Dimension

2

Specification

Protocol Standard

IEEE802.3, IEEE802.3u, IEEE802.3x Flow control, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree

Wavelength

1310nm/1550nm

Transmission Distance

Cat5 100mSingle Mode, Single-fiber 20/40/60/80/100Km

Ethernet Port

RJ45 Ports, Connection STP / UTP Cat5/Cat5e Cooper Cable

Fiber Port

Single Mode, Single Fiber, SC/ST/FC (Diameter 9/125μm )

Exchange Attribute

Conversion Method: Media conversion, store and forward / straight inMAC Add: 1 K

Cache: 1 Mbit

Full duplex state: flow control, half-duplex: backpressure mode

Store and Forward: 9.6us, Straight In: 0.9us

BER: <1/1000000000

LED Indicator

PWR( Power Supply )FX LINK/ACT

FDX ( Ethernet port full / half duplex mode )

TX LINK/ACT ( Ethernet port communication / action )

100 ( 100/10M transmission rate )

FX ( Optical signal )

Power Supply

Power Input: DC5V1AFull Load: <2.5 W

Working Environment

Operating Temperature: -20~70℃Storage Temperature: -40~70℃

Storage Humidity: 5% to 90% non-condensing

Dimension

94*71*26mm ( L * W * H )

Certification

CE, FCC, RoHS

Warranty

3-years

Order Information

Model No.

Description of Goods

JHA-F11W-20

10/100M Single-mode, Single Fiber, 20Km, SC/ST/FC Connector

JHA-F11W-40

10/100M Single-mode, Single Fiber, 40Km, SC/ST/FC Connector

JHA-F11W-60

10/100M Single-mode, Single Fiber, 60Km, SC/ST/FC Connector

JHA-F11W-80

10/100M Single-mode, Single Fiber, 80Km, SC/ST/FC Connector

JHA-F11W-100

10/100M Single-mode, Single Fiber, 100Km, SC/ST/FC Connector

JHA-F11W-120

10/100M Single-mode, Single Fiber, 120Km, SC/ST/FC Connector

 


  • Previous:
  • Next:

  • Write your message here and send it to us